Characterization of fracture and impact behavior of plasma nitrided 42crmo4 steel: structural and mechanical properties
Open Access
- 1 January 2024
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4) , e20240468
Abstract
This study examines the impact of adding nitrogen (N+) to the surface of 42CrMo4 steel on its structural and mechanical properties. The specimens (T2, I2) were nitrided first at 580°C for 13 hours, and then at 560°C to remove oxides. Later, we compared them with the untreated specimens (T1, I1) to assess the impact of thermochemical treatment. The mechanical properties and fracture behaviors were examined and analyzed using Vickers microhardness, unidirectional tensile, and Charpy U tests. The nitrogen and carbon profiles in the nitrided layer were predicted by simulating the nitriding process. Findings show a progressive decrease in nitrogen content from 0.6 to 0 wt.%, unlike the carbon which increases to 0.4 wt.% after 414 μm. Besides, the microscopic observations show a dense white layer of nitrides (T2, I2), while the untreated specimens exhibit a ferrite and pearlite microstructure. The X-ray diffraction (XRD) analyses show the formation of iron and chromium nitrides (ε-Fe2-3N, γ-Fe4N, γ-(Fe, Cr) N4) in the surface layer, accompanied by a decrease in pure α-iron. The nitrided 42CrMo4 steel is characterized with an increase in the lattice parameter, followed by a reduction in the grain size. Moreover, the maximum hardness of approximately 603 HV in the nitrided layer decreased to around 215 HV at a depth of 414 μm. The uniaxial tensile test reveals ductile behavior at the core of the nitrided steel, unlike the surface, which is hard and fragile. Finally, the mechanical properties improve after plasma nitriding, increasing the elasticity modulus to E = 401700 MPa and the tensile strength to Rm = 1219.7 MPa.Keywords
This publication has 47 references indexed in Scilit:
- Nitriding in non-toxic salts bath: An approach to implement cleaner production in the metallurgic industryCleaner Engineering and Technology, 2021
- Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steelsMaterials Chemistry and Physics, 2020
- Effect of post-treated low-temperature plasma nitriding on the wear and corrosion resistance of 316L stainless steel manufactured by laser powder-bed fusionAdditive Manufacturing, 2020
- Probing True Microstructure-Hardening Relationship in Simulated Heat Affected Zone of P91B SteelsMetallography, Microstructure, and Analysis, 2019
- The enhancement effect of salt bath preoxidation on salt bath nitriding for AISI 1045 steelApplied Surface Science, 2019
- Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applicationsApplied Nanoscience, 2018
- Nanomechanical properties of iron nitrides produced on 42CrMo4 steel by controlled gas nitriding and laser heat treatmentJournal of Alloys and Compounds, 2017
- Phase transformations in the nitrocarburizing surface of carbon steels revisited by microstructure and property characterizationsActa Materialia, 2013
- Influence of ion nitriding on fatigue strength of low-alloy (42CrMo4) steel: Experimental characterization and predictive approachInternational Journal of Fatigue, 2010
- Multicomponent diffusion simulation based on finite elementsMetallurgical and Materials Transactions A, 1999