Integer-slot vs fractional-slot concentrated-winding axial-flux permanent magnet machines: Comparative design, FEA and experimental tests
- 1 September 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (23293721) , 3120-3127
Abstract
In slotted axial-flux permanent magnet machines two possible concentrated-winding arrangements can be used: integer-slot and fractional-slot. The former type, i.e. windings with a number of slots/pole/phase equal to one, has long been a preferred choice with machine designers due to its simple layout. On the other hand, fractional-slot concentrated-winding machines have been the focus of a significant amount of international research in the past decade. This paper presents an original comparison between two 10 kW axial-flux permanent magnet machine prototypes with concentrated-windings: a 20 pole, 60 slot integer-slot concentrated-winding machine and a 20 pole, 24 slot fractional-slot concentrated-winding machine. The design of both machines is described, highlighting the constraints that have been set to allow a fair comparison between them. Static and time-stepped finite element analysis results are presented. Comparative no-load and load tests are performed on full scale prototypes and the results are reported. Finally, conclusions are made regarding the performances and required trade-offs for both machines.Keywords
This publication has 13 references indexed in Scilit:
- Influence of magnetic wedges on the load performance of axial flux permanent magnet machines2010
- Surface permanent magnet synchronous machine design for saliency-tracking self-sensing position estimation at zero and low speeds2010
- Fractional-slot concentrated-winding axial-flux permanent magnet machine with core-wound coils2010
- Concentrated winding axial flux permanent magnet motor with plastic bonded magnets and sintered segmented magnets2008
- Analysis of the Yokeless And Segmented Armature Machine2007
- Design Issues Of A Fractional-Slot Windings Axial Flux PM Machine With Soft Magnetic Compound Stator2007
- Comparison of PM brushless motors, having either all teeth or alternate teeth woundIEEE Transactions on Energy Conversion, 2006
- Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations - Design and Test Results2005
- Winding factors and Joule losses of permanent magnet machines with concentrated windings2003
- Synthesis of high performance PM motors with concentrated windingsIEEE Transactions on Energy Conversion, 2002