An Experimental Investigation on the Degradation of Material Properties of Naturally Corroded Bailey Truss
Open Access
- 30 November 2024
- Vol. 14 (12) , 3847
Abstract
In its duration of service, Bailey truss is commonly exposed to corrosion threats due to the failure of anti-corrosion coatings, resulting in corrosion damage to its steel members and degradation of its structural performance. There is a lack of research on the degradation of the material properties of Bailey truss due to natural corrosion. This paper investigated the degradation of a Bailey truss that had been in service for eight years, in northeast China. Tensile tests were carried out on corroded specimens from three truss members (the chords, diagonals, and verticals), to establish regression equations for the minimum residual cross-sectional rate and several material properties of four parts (chord flange, chord web, diagonal web, and vertical web). The equations were compared with the degradation of steel properties with different yield strengths, cross-sectional shapes, and corrosion types. Fitting formulas for the true constitutive models of the four parts of non-corroded and corroded specimens were developed. It was found that the diagonal truss member was the most severely affected by corrosion, while the chord web was the least impacted. The degradation trend of 80% in regard to natural corrosion specimens is lower than that of the Bailey truss diagonal web and the degradation trend in terms of the yield strength and ultimate strength in the same part is less than 5%. According to the Ramberg–Osgood model, the multi-curve constitutive model fitting formulas are suitable for four parts of naturally corroded Bailey truss.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFC3802202)
This publication has 25 references indexed in Scilit:
- Effect of interaction between corrosion and high temperature on mechanical properties of Q355 structural steelConstruction and Building Materials, 2021
- Comparison on corrosion behaviour and mechanical properties of structural steel exposed between urban industrial atmosphere and laboratory simulated environmentConstruction and Building Materials, 2019
- Surface roughness characteristics of corroded steel pipe piles exposed to marine environmentConstruction and Building Materials, 2019
- Incipient corrosion behavior and mechanical properties of low-alloy steel in simulated industrial atmosphereConstruction and Building Materials, 2018
- Evaluation of corrosion characteristics and corrosion effects on the mechanical properties of reinforcing steel bars based on three-dimensional scanningCorrosion Science, 2018
- Experimental analysis of residual ultimate strength of stiffened panels with pitting corrosion under compressionEngineering Structures, 2017
- Effect of simulated pitting corrosion on the tensile properties of steelConstruction and Building Materials, 2017
- Effects of inhomogeneous elastic stress on corrosion behaviour of Q235 steel in 3.5% NaCl solution using a novel multi-channel electrode techniqueCorrosion Science, 2016
- Tensile strength assessment of corroded small scale specimensCorrosion Science, 2014
- Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beamConstruction and Building Materials, 2014