Changyong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Changyong Liu has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Mingyang Sun
School of Civil Engineering and Transportation, Northeast Forestry University, Harbin 150040, China
3 shared publications - Qinghe Wang
Shenyang Jianzhu Univ
3 shared publications Sumei Zhang
Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology, Harbin, China
3 shared publications- Gang Wang
China Jingye Engineering Technology, Co., Ltd., Shenzhen 518055, China
2 shared publications - Guihai Yan
Central Research Institute of Building and Construction Co., Ltd., MCC Group, Shenzhen 518088, China
2 shared publications - Hui Tang
The Hong Kong Polytechnic University
2 shared publications
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Unraveling extreme tornado–turbine interactions: A modal perspective for interpreting extreme loads and flow structures
Wind turbines are increasingly exposed to tornadoes, yet the aerodynamic loading mechanisms and flow physics governing tornado–turbine interactions remain poorly understood. In this study, a numerical wind tunnel based on large-eddy simulations is developed and validated to reproduce both atmospheric boundary layer (ABL) and tornado flows. The National Renewable Energy Laboratory 5-MW wind turbine is employed as a representative model, and proper orthogonal decomposition is used to identify the dominant coherent structures and their associated flow dynamics. The results show that tornado-induced loads far exceed those under ABL, with distributions strongly influenced by swirl ratio, blade spatial position, chord length, and twist distribution. Windward blade orientation significantly affects pressure distributions and dominant modes, while leading and trailing edges experience strong fluctuations. Flow separation and vortex formation are strongly influenced by surface orientation, spanwise location, and swirl ratio. Notably, the first three pressure modes and two velocity modes capture over 90% of the total modal energy, enabling reconstruction of turbine–tornado interactions with only a few dominant coherent structures. Furthermore, comparisons with the translating tornado cases examined in our previous study show that the stationary tornado simulation provides reasonable estimates of the principal blade loading characteristics under the investigated conditions.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Unraveling extreme tornado–turbine interactions: A modal perspective for interpreting extreme loads and flow structures
Wind turbines are increasingly exposed to tornadoes, yet the aerodynamic loading mechanisms and flow physics governing tornado–turbine interactions remain poorly understood. In this study, a numerical wind tunnel based on large-eddy simulations is developed and validated to reproduce both atmospheric boundary layer (ABL) and tornado flows. The National Renewable Energy Laboratory 5-MW wind turbine is employed as a representative model, and proper orthogonal decomposition is used to identify the dominant coherent structures and their associated flow dynamics. The results show that tornado-induced loads far exceed those under ABL, with distributions strongly influenced by swirl ratio, blade spatial position, chord length, and twist distribution. Windward blade orientation significantly affects pressure distributions and dominant modes, while leading and trailing edges experience strong fluctuations. Flow separation and vortex formation are strongly influenced by surface orientation, spanwise location, and swirl ratio. Notably, the first three pressure modes and two velocity modes capture over 90% of the total modal energy, enabling reconstruction of turbine–tornado interactions with only a few dominant coherent structures. Furthermore, comparisons with the translating tornado cases examined in our previous study show that the stationary tornado simulation provides reasonable estimates of the principal blade loading characteristics under the investigated conditions.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5966-5977
A Miniaturized T-Shaped Inchworm Piezoelectric Actuator Inspired by Stick Insect With High Speed
This article presents a miniaturized T-shaped inchworm piezoelectric actuator (PA) inspired by stick insect motion, which contributes to the reduction and speed enhancement for inchworm PA. Clamping and driving motion can be realized by the concerted actuation of two driving units, which reduces the number of piezoelectric stack actuators (PSAs) to realize the inchworm working principle. The displacement amplification characteristics of the bridge-type mechanism are employed to preliminarily reduce the PA volume. A multiobjective design optimization method integrating a backpropagation neural network with particle swarm optimization is further proposed to minimize the actuator size to 40 × 25 × 7 mm3. Experimental results showed that the proposed inchworm PA achieved an improved maximum speed of 4547.29 $\boldsymbol{\mu}$m/s under a voltage of 150 V and a frequency of 300 Hz. Furthermore, it delivered an output force of 2.3 N and exhibited stable step under a 4 kg load with no backward motion.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5966-5977
A Miniaturized T-Shaped Inchworm Piezoelectric Actuator Inspired by Stick Insect With High Speed
This article presents a miniaturized T-shaped inchworm piezoelectric actuator (PA) inspired by stick insect motion, which contributes to the reduction and speed enhancement for inchworm PA. Clamping and driving motion can be realized by the concerted actuation of two driving units, which reduces the number of piezoelectric stack actuators (PSAs) to realize the inchworm working principle. The displacement amplification characteristics of the bridge-type mechanism are employed to preliminarily reduce the PA volume. A multiobjective design optimization method integrating a backpropagation neural network with particle swarm optimization is further proposed to minimize the actuator size to 40 × 25 × 7 mm3. Experimental results showed that the proposed inchworm PA achieved an improved maximum speed of 4547.29 $\boldsymbol{\mu}$m/s under a voltage of 150 V and a frequency of 300 Hz. Furthermore, it delivered an output force of 2.3 N and exhibited stable step under a 4 kg load with no backward motion.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Wake dynamics and coherence modes of vertical-axis wind turbines: The role of atmospheric boundary layer
Vertical-axis wind turbines (VAWTs) are increasingly recognized as the preferred choice for large-scale wind energy harvesting, particularly in offshore environments, due to their unique advantages, including omni-directional capability and lower installation and maintenance costs. Variations in terrain and different phases of the diurnal cycle create distinct atmospheric boundary layer (ABL) conditions, which inevitably have a significant impact on the aerodynamic and wake characteristics of VAWTs. To systematically observe these effects, this study employs large-eddy simulation to explore the influence of four representative ABL scenarios on VAWTs. The results indicate that ABL influences on VAWT aerodynamic performance are sensitive to installation height. ABLs with higher wind shear coefficients (WSCs) result in greater velocity deficits (VDs) in near-wake regions, while turbulence intensity (TI) fluctuations increase with rising WSC. Higher installation heights facilitate a faster recovery of both VD and TI. Furthermore, vortex stability is affected by ABL conditions and installation height, as higher WSCs or lower heights bring unsteady vortex break positions closer to the rotor, thus enhancing turbulence. Modal decomposition reveals that the dominant mode frequency across various ABL conditions corresponds to twice the VAWT rotation frequency, highlighting the dynamic evolution of wake vortices. These findings provide valuable insights for the optimization of VAWT wind farm design, particularly in integrating ABL variability into the determination of hub height and turbine spacing strategies, thereby maximizing energy harvesting.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Wake dynamics and coherence modes of vertical-axis wind turbines: The role of atmospheric boundary layer
Vertical-axis wind turbines (VAWTs) are increasingly recognized as the preferred choice for large-scale wind energy harvesting, particularly in offshore environments, due to their unique advantages, including omni-directional capability and lower installation and maintenance costs. Variations in terrain and different phases of the diurnal cycle create distinct atmospheric boundary layer (ABL) conditions, which inevitably have a significant impact on the aerodynamic and wake characteristics of VAWTs. To systematically observe these effects, this study employs large-eddy simulation to explore the influence of four representative ABL scenarios on VAWTs. The results indicate that ABL influences on VAWT aerodynamic performance are sensitive to installation height. ABLs with higher wind shear coefficients (WSCs) result in greater velocity deficits (VDs) in near-wake regions, while turbulence intensity (TI) fluctuations increase with rising WSC. Higher installation heights facilitate a faster recovery of both VD and TI. Furthermore, vortex stability is affected by ABL conditions and installation height, as higher WSCs or lower heights bring unsteady vortex break positions closer to the rotor, thus enhancing turbulence. Modal decomposition reveals that the dominant mode frequency across various ABL conditions corresponds to twice the VAWT rotation frequency, highlighting the dynamic evolution of wake vortices. These findings provide valuable insights for the optimization of VAWT wind farm design, particularly in integrating ABL variability into the determination of hub height and turbine spacing strategies, thereby maximizing energy harvesting.
- Open Access
An Experimental Investigation on the Degradation of Material Properties of Naturally Corroded Bailey Truss
In its duration of service, Bailey truss is commonly exposed to corrosion threats due to the failure of anti-corrosion coatings, resulting in corrosion damage to its steel members and degradation of its structural performance. There is a lack of research on the degradation of the material properties of Bailey truss due to natural corrosion. This paper investigated the degradation of a Bailey truss that had been in service for eight years, in northeast China. Tensile tests were carried out on corroded specimens from three truss members (the chords, diagonals, and verticals), to establish regression equations for the minimum residual cross-sectional rate and several material properties of four parts (chord flange, chord web, diagonal web, and vertical web). The equations were compared with the degradation of steel properties with different yield strengths, cross-sectional shapes, and corrosion types. Fitting formulas for the true constitutive models of the four parts of non-corroded and corroded specimens were developed. It was found that the diagonal truss member was the most severely affected by corrosion, while the chord web was the least impacted. The degradation trend of 80% in regard to natural corrosion specimens is lower than that of the Bailey truss diagonal web and the degradation trend in terms of the yield strength and ultimate strength in the same part is less than 5%. According to the Ramberg–Osgood model, the multi-curve constitutive model fitting formulas are suitable for four parts of naturally corroded Bailey truss.
Open AccessAn Experimental Investigation on the Degradation of Material Properties of Naturally Corroded Bailey Truss
In its duration of service, Bailey truss is commonly exposed to corrosion threats due to the failure of anti-corrosion coatings, resulting in corrosion damage to its steel members and degradation of its structural performance. There is a lack of research on the degradation of the material properties of Bailey truss due to natural corrosion. This paper investigated the degradation of a Bailey truss that had been in service for eight years, in northeast China. Tensile tests were carried out on corroded specimens from three truss members (the chords, diagonals, and verticals), to establish regression equations for the minimum residual cross-sectional rate and several material properties of four parts (chord flange, chord web, diagonal web, and vertical web). The equations were compared with the degradation of steel properties with different yield strengths, cross-sectional shapes, and corrosion types. Fitting formulas for the true constitutive models of the four parts of non-corroded and corroded specimens were developed. It was found that the diagonal truss member was the most severely affected by corrosion, while the chord web was the least impacted. The degradation trend of 80% in regard to natural corrosion specimens is lower than that of the Bailey truss diagonal web and the degradation trend in terms of the yield strength and ultimate strength in the same part is less than 5%. According to the Ramberg–Osgood model, the multi-curve constitutive model fitting formulas are suitable for four parts of naturally corroded Bailey truss.
- Open Access
Monocular 3D Multi-Person Pose Estimation for On-Site Joint Flexion Assessment: A Case of Extreme Knee Flexion Detection
Work-related musculoskeletal disorders (WMSDs) represent a significant health challenge for workers in construction environments, often arising from prolonged exposure to ergonomic risks associated with manual labor, awkward postures, and repetitive motions. These conditions not only lead to diminished worker productivity but also incur substantial economic costs for employers and healthcare systems alike. Thus, there is an urgent need for effective tools to assess and mitigate these ergonomic risks. This study proposes a novel monocular 3D multi-person pose estimation method designed to enhance ergonomic risk assessments in construction environments. Leveraging advanced computer vision and deep learning techniques, this approach accurately captures and analyzes the spatial dynamics of workers’ postures, with a focus on detecting extreme knee flexion, a critical indicator of work-related musculoskeletal disorders (WMSDs). A pilot study conducted on an actual construction site demonstrated the method’s feasibility and effectiveness, achieving an accurate detection rate for extreme flexion incidents that closely aligned with supervisory observations and worker self-reports. The proposed monocular approach enables universal applicability and enhances ergonomic analysis through 3D pose estimation and group pose recognition for timely interventions. Future efforts will focus on improving robustness and integration with health monitoring to reduce WMSDs and promote worker health.
Open AccessMonocular 3D Multi-Person Pose Estimation for On-Site Joint Flexion Assessment: A Case of Extreme Knee Flexion Detection
Work-related musculoskeletal disorders (WMSDs) represent a significant health challenge for workers in construction environments, often arising from prolonged exposure to ergonomic risks associated with manual labor, awkward postures, and repetitive motions. These conditions not only lead to diminished worker productivity but also incur substantial economic costs for employers and healthcare systems alike. Thus, there is an urgent need for effective tools to assess and mitigate these ergonomic risks. This study proposes a novel monocular 3D multi-person pose estimation method designed to enhance ergonomic risk assessments in construction environments. Leveraging advanced computer vision and deep learning techniques, this approach accurately captures and analyzes the spatial dynamics of workers’ postures, with a focus on detecting extreme knee flexion, a critical indicator of work-related musculoskeletal disorders (WMSDs). A pilot study conducted on an actual construction site demonstrated the method’s feasibility and effectiveness, achieving an accurate detection rate for extreme flexion incidents that closely aligned with supervisory observations and worker self-reports. The proposed monocular approach enables universal applicability and enhances ergonomic analysis through 3D pose estimation and group pose recognition for timely interventions. Future efforts will focus on improving robustness and integration with health monitoring to reduce WMSDs and promote worker health.
- Open Access
Automated Defect Detection on Dry-Hanging Stone Curtain Walls through Colored Point Clouds
Stone curtain walls are widely used in contemporary architectures; however, their regular inspection is always labor-intensive, time-consuming, and hazardous due to the complex and enclosed spatial structure of these high-rise building enclosures. To address this issue, this study proposes an automated and novel inspection method, which is composed of the following three steps: First, we utilize 3D laser scanning technology to capture colored point cloud data of the stone curtain wall system; subsequently, by extracting and processing the integration of color and depth information, the stone panels and end sealants are precisely segmented; finally, various defects, such as cracks, unevenness, and irregularities, are automatically identified through artificial intelligence algorithms in a timely manner. To validate the proposed method, an on-site experiment was carried out to demonstrate the effectiveness in detecting multiple defects concurrently on stone curtain walls. The experimental results showed that our proposed method could provide a non-contact and automated inspection alternative for all the stone curtain walls with a high accuracy of anomaly detection, facilitating rational maintenance plans and strategies to ensure the safety and performance of these modern building enclosures.
Open AccessAutomated Defect Detection on Dry-Hanging Stone Curtain Walls through Colored Point Clouds
Stone curtain walls are widely used in contemporary architectures; however, their regular inspection is always labor-intensive, time-consuming, and hazardous due to the complex and enclosed spatial structure of these high-rise building enclosures. To address this issue, this study proposes an automated and novel inspection method, which is composed of the following three steps: First, we utilize 3D laser scanning technology to capture colored point cloud data of the stone curtain wall system; subsequently, by extracting and processing the integration of color and depth information, the stone panels and end sealants are precisely segmented; finally, various defects, such as cracks, unevenness, and irregularities, are automatically identified through artificial intelligence algorithms in a timely manner. To validate the proposed method, an on-site experiment was carried out to demonstrate the effectiveness in detecting multiple defects concurrently on stone curtain walls. The experimental results showed that our proposed method could provide a non-contact and automated inspection alternative for all the stone curtain walls with a high accuracy of anomaly detection, facilitating rational maintenance plans and strategies to ensure the safety and performance of these modern building enclosures.
- Open Access
- 7 January 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (1) , 113
Model for Wastage Allowance and Strength Properties of Pipe Piles Exposed to Marine Corrosion
The study’s objective is to analyze the mechanical properties of steel pipe piles as a part of a trestle bridge subjected to five years of natural marine corrosion degradation. Sixteen tensile specimens are extracted from the steel pipe piles in the splash, tidal, and immersion zones. The experimental tensile test results are used to establish regression equations defining the elastic modulus, yield strength, strain hardening index, and strength coefficient for the true stress–strain curves of the three regions. A non-linear time-dependent mathematical model is exploited to identify the corrosion degradation, using the data from one single corrosion degradation measurement campaign. The analysis indicates that the splash zone is experiencing the most severe corrosion degradation, and there are progressive losses in the mechanical properties of each zone as the corrosion degradation progresses. The established relationships of the mechanical properties, as a function of the ratio of corroded plate thickness to the as-built one, can be used as a fast-engineering approach to identify the mechanical properties of severely corroded piles. The corrosion degradation allowance is also defined using the first-order reliability method, accounting for existing uncertainties covered by the partial safety factors. By examining the impact of marine corrosion on the mechanical properties of marine structures and developing predictive models to assess the corrosion’s effect on material strength and corrosion allowance, the study aims to improve offshore structures’ safety, design, and maintenance.
- 7 January 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (1) , 113
Open AccessModel for Wastage Allowance and Strength Properties of Pipe Piles Exposed to Marine Corrosion
The study’s objective is to analyze the mechanical properties of steel pipe piles as a part of a trestle bridge subjected to five years of natural marine corrosion degradation. Sixteen tensile specimens are extracted from the steel pipe piles in the splash, tidal, and immersion zones. The experimental tensile test results are used to establish regression equations defining the elastic modulus, yield strength, strain hardening index, and strength coefficient for the true stress–strain curves of the three regions. A non-linear time-dependent mathematical model is exploited to identify the corrosion degradation, using the data from one single corrosion degradation measurement campaign. The analysis indicates that the splash zone is experiencing the most severe corrosion degradation, and there are progressive losses in the mechanical properties of each zone as the corrosion degradation progresses. The established relationships of the mechanical properties, as a function of the ratio of corroded plate thickness to the as-built one, can be used as a fast-engineering approach to identify the mechanical properties of severely corroded piles. The corrosion degradation allowance is also defined using the first-order reliability method, accounting for existing uncertainties covered by the partial safety factors. By examining the impact of marine corrosion on the mechanical properties of marine structures and developing predictive models to assess the corrosion’s effect on material strength and corrosion allowance, the study aims to improve offshore structures’ safety, design, and maintenance.
- Open Access
- 12 December 2023
- Published by MDPI AG in Preprints.org
Strength Characteristics and Wastage Allowance of Pipe Pile Subjected to Marine Corrosion
The study’s objective is to analyse the mechanical properties of steel pipe piles as a part of a trestle bridge subjected to five years of natural marine corrosion degradation. Sixteen tensile specimens were extracted from the steel pipe piles in the splash, tidal, and immersion zones. The experimental tensile test results are used to establish regression equations defining elastic modulus, yield strength, strain hardening index, and strength coefficient for the true stress-strain curves of the three regions. A non-linear time-dependent mathematical model is exploited to identify the corrosion degradation using the data from one single corrosion degradation measurement campaign. The analysis indicated that the splash zone experiences the most severe corrosion degradation, and there are progressive losses in the mechanical properties of each zone as the corrosion degradation progresses. The established relationships of the mechanical properties, as a function of the ratio of corroded plate thickness to the as-built one, can be used as a fast-engineering approach to identify the mechanical properties of severely corroded piles. The corrosion degradation allowance is also defined using the First Order Reliability Method, accounting for existing uncertainties covered by the partial safety factors. By examining the impact of marine corrosion on the mechanical properties of marine structures and developing predictive models to assess the corrosion’s effect on material strength and corrosion allowance, the study aims to improve offshore structures’ safety, design, and maintenance.
- 12 December 2023
- Published by MDPI AG in Preprints.org
Open AccessStrength Characteristics and Wastage Allowance of Pipe Pile Subjected to Marine Corrosion
The study’s objective is to analyse the mechanical properties of steel pipe piles as a part of a trestle bridge subjected to five years of natural marine corrosion degradation. Sixteen tensile specimens were extracted from the steel pipe piles in the splash, tidal, and immersion zones. The experimental tensile test results are used to establish regression equations defining elastic modulus, yield strength, strain hardening index, and strength coefficient for the true stress-strain curves of the three regions. A non-linear time-dependent mathematical model is exploited to identify the corrosion degradation using the data from one single corrosion degradation measurement campaign. The analysis indicated that the splash zone experiences the most severe corrosion degradation, and there are progressive losses in the mechanical properties of each zone as the corrosion degradation progresses. The established relationships of the mechanical properties, as a function of the ratio of corroded plate thickness to the as-built one, can be used as a fast-engineering approach to identify the mechanical properties of severely corroded piles. The corrosion degradation allowance is also defined using the First Order Reliability Method, accounting for existing uncertainties covered by the partial safety factors. By examining the impact of marine corrosion on the mechanical properties of marine structures and developing predictive models to assess the corrosion’s effect on material strength and corrosion allowance, the study aims to improve offshore structures’ safety, design, and maintenance.
- Open Access
Time-Dependent Behavior of Composite Steel–Recycled Aggregate Concrete Beams via Thermomechanical Finite Element Modeling
This paper aims to investigate the impact of recycled coarse aggregate (RCA) on the time-dependent behavior of composite steel–recycled aggregate concrete (RAC) beams. The FE models of the composite beams were established, and a parametric study was conducted to obtain the primary factors. Furthermore, the design method for predicting the long-term deflection was proposed by including the shrinkage deflection component. The results showed that the RCA replacement ratio significantly influenced the long-term deflection of composite beams; the long-term deflection of composite beams with 100% RCA increased by 3.5–17.2% compared with those without RCA. Moreover, using uniform shrinkage and creep models led to a 4.5–10.3% overestimation of the long-term deflection of the composite beams with the composite slabs due to nonuniform shrinkage and creep distributions. Finally, the proposed design procedures could accurately predict the long-term deflection of the composite steel–RAC beams, and the difference between the calculated and FE results ranged from 0.961 to 0.986.
Open AccessTime-Dependent Behavior of Composite Steel–Recycled Aggregate Concrete Beams via Thermomechanical Finite Element Modeling
This paper aims to investigate the impact of recycled coarse aggregate (RCA) on the time-dependent behavior of composite steel–recycled aggregate concrete (RAC) beams. The FE models of the composite beams were established, and a parametric study was conducted to obtain the primary factors. Furthermore, the design method for predicting the long-term deflection was proposed by including the shrinkage deflection component. The results showed that the RCA replacement ratio significantly influenced the long-term deflection of composite beams; the long-term deflection of composite beams with 100% RCA increased by 3.5–17.2% compared with those without RCA. Moreover, using uniform shrinkage and creep models led to a 4.5–10.3% overestimation of the long-term deflection of the composite beams with the composite slabs due to nonuniform shrinkage and creep distributions. Finally, the proposed design procedures could accurately predict the long-term deflection of the composite steel–RAC beams, and the difference between the calculated and FE results ranged from 0.961 to 0.986.