Correlative Effects of Carbon Support Structures and Surface Properties on ORR Catalytic Activities of Loaded Catalysts
- 6 September 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (37) , 49236-49248
Abstract
As a complex three-phase heterogeneous catalyst, the oxygen reduction reaction (ORR) catalyst activity is determined by the interfacial and surface structures and chemical state of the catalyst support. As a typical biomass carbon-based support, rice husk-based porous carbon (RHPC) has natural unique hierarchical porous structures, which easily regulate the microstructure and surface properties. This study explored the correlative effects of RHPC structure and surface properties on ORR catalytic activity through the typical modification methods, namely, alkali etching, high temperature, oxidation, and ball milling. The various factors for the joint effects are defined as the specific surface area, oxygen-containing functional groups, graphite edge defects, resistivity, and contact angle. The analysis of such joint influences is difficult to quantitatively evaluate due to the large number of experimental factors and small sample sizes. Partial least-squares (PLS) can better deal with such problems. Therefore, a PLS regression model was established to evaluate the relative weight of each factor on the catalytic activity for the RHPC-based support catalysts. The results reveal that the regression coefficients of four factors yield similar magnitude for the effect of the half-wave potential (E1/2). However, graphite edge defects had a more significant impact on the limiting diffusion current density (J) and electron transfer number (n). Furthermore, an optimal support named BM-RHPC-3 was prepared with more defects and oxygen-containing functional groups, which prepared Fe-NS/BM-RHPC-3 presenting the best ORR catalytic activity (E1/2 = 0.880 V, J of 5.15 mA cm-2), superior to Pt/C (E1/2 = 0.844 V, J of 4.99 mA cm-2). The statistical regression model is validated with a relative error of less than 5% between predicted and true values for analyzing RHPC-based ORR catalysts' catalytic performance. It shows the feasibility of experiment-informed learning for data-driven material discovery and design.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFA1504200)
This publication has 74 references indexed in Scilit:
- Promoting Oxygen Reduction Reaction on Atomically Dispersed Fe Sites via Establishing Hydrogen Bonding with the Neighboring P AtomsAdvanced Energy Materials, 2022
- Raman signatures of detonation sootJournal of Raman Spectroscopy, 2022
- Carboxylated carbon nanotubes with high electrocatalytic activity for oxygen evolution in acidic conditionsInfoMat, 2021
- Edge‐Rich Fe−N4 Active Sites in Defective Carbon for Oxygen Reduction CatalysisAdvanced Materials, 2020
- Biomass for Bioenergy2018
- Fe Isolated Single Atoms on S, N Codoped Carbon by Copolymer Pyrolysis Strategy for Highly Efficient Oxygen Reduction ReactionAdvanced Materials, 2018
- 3D Space-Confined Pyrolysis of Double-Network Aerogels Containing In-Fe Cyanogel and Polyaniline: A New Approach to Hierarchically Porous Carbon with Exclusive Fe-N
x
Active Sites for Oxygen Reduction CatalysisSmall Methods, 2017
- Porous Carbon Supports: Recent Advances with Various Morphologies and CompositionsChemCatChem, 2015
- Intelligent Materials and Technology2015
- Electrical properties of conductive adhesives as affected by particle compositions, particle shapes, and oxidizing temperatures of copper powders in a polymer matrixJournal of Applied Polymer Science, 2004