YJYue Jiang

Yue Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yue Jiang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preparation of Superhydrophobic Coatings with Drag Reduction and Anti-icing Properties via a Simple Spraying Method

    by Changtai Gong, Xinyan Ma, Jiaqi Liu, Yazheng Cao, Xinxin Wang, Hao Li, Yanlong Shao, Yue Jiang, Zhihui Zhang, Luquan Ren

    Underwater drag and icing pose significant challenges in navigation bodies such as ship navigation. Despite the importance of mitigating these challenges, functional surfaces that can integrate both anti-icing and drag-reduction properties remain scarce. In this work, we fabricate a superhydrophobic coating by spraying modified TiO2 nanoparticles on Al substrates, which can reduce drag while delaying icing. The superhydrophobic coating demonstrated excellent drag reduction performance, with a drag reduction rate of 39.8%. At the same time, under a low-temperature environment of 15 °C, the superhydrophobic coating delayed the ice formation rate by 6 times compared to the substrate. This is because the rough micronano structure of the superhydrophobic coating can trap air. The trapped air not only generates gas-liquid interfaces that replace solid-liquid interfaces, inducing slip flow and thereby reducing drag, but also reduces the thermal exchange between the droplets and the substrate and delays the nucleation of ice, thereby achieving delayed freezing. Therefore, this study proposes a novel method for large-area preparation of functional surfaces with drag reduction capabilities and provides an anti-icing capability.


  • Correlative Effects of Carbon Support Structures and Surface Properties on ORR Catalytic Activities of Loaded Catalysts

    by Jin Yang, Yupeng Wu, Jun Shi, Huimin Liu, Zhiqiang Liu, Qinwen You, Xinxin Li, Linchuan Cong, Debo Liu, Fangbing Liu, et al.

    As a complex three-phase heterogeneous catalyst, the oxygen reduction reaction (ORR) catalyst activity is determined by the interfacial and surface structures and chemical state of the catalyst support. As a typical biomass carbon-based support, rice husk-based porous carbon (RHPC) has natural unique hierarchical porous structures, which easily regulate the microstructure and surface properties. This study explored the correlative effects of RHPC structure and surface properties on ORR catalytic activity through the typical modification methods, namely, alkali etching, high temperature, oxidation, and ball milling. The various factors for the joint effects are defined as the specific surface area, oxygen-containing functional groups, graphite edge defects, resistivity, and contact angle. The analysis of such joint influences is difficult to quantitatively evaluate due to the large number of experimental factors and small sample sizes. Partial least-squares (PLS) can better deal with such problems. Therefore, a PLS regression model was established to evaluate the relative weight of each factor on the catalytic activity for the RHPC-based support catalysts. The results reveal that the regression coefficients of four factors yield similar magnitude for the effect of the half-wave potential (E1/2). However, graphite edge defects had a more significant impact on the limiting diffusion current density (J) and electron transfer number (n). Furthermore, an optimal support named BM-RHPC-3 was prepared with more defects and oxygen-containing functional groups, which prepared Fe-NS/BM-RHPC-3 presenting the best ORR catalytic activity (E1/2 = 0.880 V, J of 5.15 mA cm-2), superior to Pt/C (E1/2 = 0.844 V, J of 4.99 mA cm-2). The statistical regression model is validated with a relative error of less than 5% between predicted and true values for analyzing RHPC-based ORR catalysts' catalytic performance. It shows the feasibility of experiment-informed learning for data-driven material discovery and design.


  • Superhydrophobic Mechano-Bactericidal Surface with Photodynamic Antibacterial Capability

    by Shujin Wang, Ziting Liu, Li Wang, Jianing Xu, Ru Mo, Yue Jiang, Cuie Wen, Zhihui Zhang, Luquan Ren

    Bacterial invasion and proliferation on various surfaces pose a serious threat to public health worldwide. Conventional antibacterial strategies that mainly rely on bactericides exhibit high bacteria-killing efficiency but might trigger the well-known risk of antibiotic resistance. Here, we report a superhydrophobic mechano-bactericidal surface with photodynamically enhanced antibacterial capability. First, bioinspired nanopillars with polycarbonate as the bulk material were replicated from anodized alumina oxide templates via a simple hot-pressing molding method. Subsequently, a facile bovine serum albumin phase-transition method was used to introduce chlorin e6 onto the nanopillar-patterned surface, which was then perfluorinated to render the surface superhydrophobic. Benefiting from its strong liquid super-repellency and photodynamically enhanced mechano-bactericidal properties, the superhydrophobic nanopillar-patterned surface exhibits 100% antibacterial efficiency after 30 min visible light irradiation (650 nm, 20 mW cm-2). More strikingly, the surface exhibited impressive long-lasting antimicrobial performance, maintaining a very high bactericidal efficiency (≥99%) even after 10 cycles of bacterial contamination tests. Also, the superhydrophobic nanopillar-patterned surface displays good hemocompatibility with a much lower than the 5% hemolysis rate. Overall, this work offers a new method for significantly enhancing the antibacterial efficiency of structural antimicrobial surfaces without involving any bactericidal agents, and this functional surface shows great potential in the field of advanced medical materials and hospital surfaces.


  • Open Access

    Magnetite Nanoparticles In-Situ Grown and Clustered on Reduced Graphene Oxide for Supercapacitor Electrodes

    by Yue Jiang, Jinxun Han, Xiaoqin Wei, Hanzhuo Zhang, Zhihui Zhang, Luquan Ren

    Fe3O4 nanoparticles with average sizes of 3–8 nm were in-situ grown and self-assembled as homogeneous clusters on reduced graphene oxide (RGO) via coprecipitation with some additives, where RGO sheets were expanded from restacking and an increased surface area was obtained. The crystallization, purity and growth evolution of as-prepared Fe3O4/RGO nanocomposites were examined and discussed. Supercapacitor performance was investigated in a series of electrochemical tests and compared with pure Fe3O4. In 1 M KOH electrolyte, a high specific capacitance of 317.4 F g−1 at current density of 0.5 A g−1 was achieved, with the cycling stability remaining at 86.9% after 5500 cycles. The improved electrochemical properties of Fe3O4/RGO nanocomposites can be attributed to high electron transport, increased interfaces and positive synergistic effects between Fe3O4 and RGO.


  • Open Access

    Aggravated stress fluctuation and mechanical size effects of nanoscale lamellar bone pillars

    by Zhichao Ma, Zhenfeng Qiang, Chaowei Guo, Yue Jiang, Hongwei Zhao, Cuie Wen, Luquan Ren

    The size effects of mechanical properties influence the microdeformation behaviors and failure mechanisms of hierarchical lamellar bones. Investigations of the continuous deformation behaviors and structure–behavior–property relationships of nanoscale lamellar bones provide essential data for reducing the risk of fracture. Here, five pillars with diameters ranging from 640 to 4971 nm inside a single lamella were fabricated. In situ pillar compressive tests inside a scanning electron microscope directly revealed the diameter-dependent enhanced strength, ductility, and stress fluctuation amplitude. Real-time observations also revealed the segmented deformation and morphological anisotropy of pillars with smaller diameters and the slight elastic recovery of pillars with larger diameters. The critical diameter leading to the brittle-to-ductile transition was confirmed. The “analogous to serrated flow” stress fluctuation behaviors at the nanoscale exhibited a significant size effect, with coincident fluctuation cycles independent of diameter, and each cycle of the fluctuation manifested as a slow stress increase and a rapid stress release. The discontinuous fracture of collagen fibrils, embedded enhancement of hydroxyapatite crystals, and layered dislocation movement on the basis of strain gradient plasticity theory were expected to induce cyclical stress fluctuations with different amplitudes.


  • Open Access

    Pore fluids evolution in the sandstone of rift basins: a case study of Dongying sag, Jiyang depression, East China

    by Wei Meng, Xianli Ren, Yue Jiang, Songxi Li, Ru Lin

    Pore fluids in basins control the migration of material and energy in sedimentary basin. Make sure pore fluids evolution process would be important for high-quality reservoir prediction. In this study, we pay attention on Dongying sag, which located in the eastern of Jiyang depression, Bohai Bay basin. We collected core sample for thin section observation and SEM, to determine diagenetic sequence in sandstone of study area. Take geological characteristics of study area into consideration, make sure the source of diagenetic products. At last, we deduce the pore fluids evolution process in study area.

  • Improved GPSR Protocol and Performance Evaluation

    by Yue Jiang, Gaochao Xu, Hongliang Dong, Zhiyi Fang, You Guan, Zhanyang Zhang

    This paper proposes an improved GRPS protocol based on the ant colony algorithm, OVGPSR. In this protocol, various factors are considered in the routing calculation, and the parameters such as vehicle speed, energy consumption, and deflection angle are introduced into the ant colony algorithm. The algorithm predicts vehicle intermediate nodes, improves the ability of a vehicle ad hoc network, and reduces energy consumption. The results show that OVGPSR decreases delay and enhance throughput.