Effect of Repeated Firings and Thickness on Optical Properties of Variable Preshaded and Shaded Novel Translucent Zirconia Blocks
Open Access
- 16 August 2022
- journal article
- research article
- Published by Wiley in BioMed Research International
- Vol. 2022 (1) , 8572782
Abstract
Objective. The purpose of this study was to examine the optical properties of translucent zirconia with different thickness during multiple firings. Materials and Methods. Three different types of translucent zirconia (Vita YZ HT (HT), Vita YZ ST (ST), Vita YZ XT (XT)) with thickness of 0.5, 1, and 1.5 mm were used in the study. 180 disk‐shaped specimens (n = 10) were prepared from preshaded and nonshaded blocks. The coloring liquid (A2, Vita Shade Liquid) was applied with a synthetic nylon brush in the nonshaded group. Then, the specimens were then subjected to 1, 3, and 5 firing times. After consecutive firings, color differences (ΔE) and translucency parameter (TP) were measured. Statistical analysis was carried out by using repeated measure ANOVA followed by Tukey test. Results. ANOVA analysis reveals that TP and ΔE were significantly affected by the repeated firings. The highest TP was seen in 0.5 mm XT specimen. For all specimens, TP decreases from 1st to 3rd firing cycles, despite TP increases from 3rd to 5th firing cycles. Although there is a significant change in TP values in 0.5 mm thickness, there is no significant change between firing cycles for 1 and 1.5 mm thickness specimens. The highest ΔE value was observed for shaded specimens between 1st and 5th firings. ΔE values were not significantly different between 1 and 3 firings. Conclusions. Changes in thickness and repeated firings of zirconia specimens affected final color and translucency of zirconia specimens. HT blocks are more affected by consecutive firings than ST and XT blocks. ΔE increased as the thicknesses decreased for both types of translucent zirconia specimens tested.Keywords
This publication has 27 references indexed in Scilit:
- Influence of coloring procedure on flexural resistance of zirconia blocksThe Journal of Prosthetic Dentistry, 2015
- Making yttria-stabilized tetragonal zirconia translucentDental Materials, 2014
- Effect of the number of coloring liquid applications on the optical properties of monolithic zirconiaDental Materials, 2014
- Translucency of Ceramic Materials for CEREC CAD/CAM SystemJournal of Esthetic and Restorative Dentistry, 2014
- Comparison of the translucency of shaded zirconia all-ceramic systemsThe Journal of Advanced Prosthodontics, 2014
- Production and characterization of self-colored dental zirconia blocksCeramics International, 2013
- The effect of ceramic thickness and number of firings on the color of a zirconium oxide based all ceramic system fabricated using CAD/CAM technologyThe Journal of Advanced Prosthodontics, 2011
- The firing procedure influences properties of a zirconia core ceramicDental Materials, 2008
- The effect of ceramic thickness and number of firings on the color of ceramic systems: An in vitro studyThe Journal of Prosthetic Dentistry, 2007
- Sources of color variation on firing porcelainDental Materials, 1991