Impact and flexural properties of PP/CaSiO3 composites
Author:
- 13 February 2016
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (2) , 398-404
Abstract
The effects of filler surface treatment and content on the impact fracture toughness and flexural properties of polypropylene (PP) composites filled with wollastonite (CaSiO3) were investigated. The results showed that the introduction of the filler could toughen and reinforce the PP; the influences of the filler surface treatment on the toughness and strength were significant; the values of the Izod V‐notched impact strength and the Charpy V‐notched impact strength of the composites increased with increasing the filler weight fractions; the values of flexural modulus increased with increasing the filler weight fractions; the flexural strength increased when the filler weight fraction was lower than 10% and then varied slightly. This toughening effect should be attributed to the stress concentration because of strip shape of the filler and to block the development of the notched cracks in the matrix, improving the notched sensitivity to the impact fracture of the PP composites. This study should be helpful to understand the mechanisms of CaSiO3 reinforcing and toughening PP resin. POLYM. COMPOS., 39:398–404, 2018. © 2016 Society of Plastics EngineersKeywords
This publication has 21 references indexed in Scilit:
- Structure–fracture properties relationship for Polypropylene reinforced with fly ash with and without maleic anhydride functionalized isotactic Polypropylene as coupling agentMaterials & Design (1980-2015), 2014
- Fracture study of the composite using essential work of fracture method: PP–SEBS–g–MA/E1 clayMaterials & Design (1980-2015), 2014
- Impact fracture toughness and morphology of polypropylene/Mg(OH)2 compositesJournal of Polymer Engineering, 2013
- Impact fracture toughness and morphology of diatomite‐filled polypropylene compositesPolymer Engineering & Science, 2009
- Toughening and reinforcing in rigid inorganic particulate filled poly(propylene): A reviewJournal of Applied Polymer Science, 2001
- Impact fracture behavior of PP/EPDM/glass bead ternary compositesPolymer Engineering & Science, 2000
- Aggregation, fracture initiation, and strength of PP/CaCO3compositesJournal of Macromolecular Science, Part B, 1999
- Brittle–ductile transition in polypropylene filled with glass beadsPolymer, 1999
- Mechanical properties and morphology of glass bead–filled polypropylene compositesPolymer Composites, 1998
- Mechanical properties of polypropylene/CaCC3 compositesMetals and Materials, 1998