Advances in Microstructure Evolution, Sigma‑Phase Formation, and XRD Analysis of Laser Metal Deposited 316L/430L‑WC Multilayers on GJL after Brake‑Shock Testing
Preprint
- 27 April 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Grey cast iron brake discs remain standard in automotive braking systems due to their favorable thermal conductivity and mechanical strength. However, increasingly stringent environmental regulations, including Euro 7, necessitate enhanced surface durability to reduce particulate emissions and mitigate corrosion‑related degradation. In this context, Laser Metal Deposition (LMD) offers a promising route to engineer wear‑resistant coating systems with tailored microstructures. This study investigates phase formation and microstructural evolution in a 316L/430L‑WC multilayer coating deposited on grey cast iron (GJL) brake discs and subjected to brake‑shock testing to replicate thermomechanical load cycles representative of real braking conditions. X‑ray diffraction (XRD) performed on the interlayer region between the 316L and 430L‑WC layers revealed clear evidence of σ‑phase formation, indicating intermetallic transformations facilitated by thermal cycling. Microstructural characterization using scanning electron microscopy (SEM) and energy‑dispersive spectroscopy (EDS) identified localized enrichment of Cr‑ and Fe‑rich regions that support the XRD‑based interpretation of σ‑phase development. These results provide insights into phase transformations and elemental diffusion in LMD‑fabricated brake‑disc coatings. The findings advance the understanding of thermally induced transformations in multilayer steel systems and support the optimization of LMD coatings for high‑temperature and wear‑intensive applications through advanced analytical evaluation.Keywords
All Related Versions
This publication has 55 references indexed in Scilit:
- Microstructure and Tribological Behavior of Extreme-High-Speed Laser-Cladded TiC Coatings on Gray Cast Iron Brake DisksJournal of Thermal Spray Technology, 2025
- Prediction of Cr, Ni and Fe Concentration Evolution During Aging of AISI 316L and Evaluation of $\sigma$-Phase Precipitation Criteria ReliabilityTransactions of the Indian Institute of Metals, 2025
- Microstructure evolution and tribo-oxidation induced by friction and wear of cast iron brake discsSurface Science and Technology, 2024
- Study and Characterization of Sigma Phase in Duplex Stainless Steel 2205 (03Kh22N6M2)Metal Science and Heat Treatment, 2024
- Study of Interface-Related Mechanisms in the Early Stage Precipitation of σ Phase in Hyper Duplex Stainless SteelsJournal of Phase Equilibria and Diffusion, 2023
- Laboratory and on-road testing for brake wear particle emissions: a reviewEnvironmental Science and Pollution Research, 2023
- Brake wear particle emissions: a reviewEnvironmental Science and Pollution Research, 2014
- Experimental Investigation and Analytical Prediction of σ-Phase Precipitation in AISI 316L Austenitic Stainless SteelMetallurgical and Materials Transactions A, 2013
- Direct Observations of Sigma Phase Formation in Duplex Stainless Steels Using In-Situ Synchrotron X-Ray DiffractionMetallurgical and Materials Transactions A, 2007
- Sigma-phase equilibria and nucleation in Fe-Cr-Ni alloys at high temperatureScripta Materialia, 1996