Dynamic model of high speed machining spindle associated to a self-vibratory drilling head influence of drill torsional-axial coupling
- 6 August 2013
- journal article
- research article
- Published by River Publishers in European Journal of Computational Mechanics
- Vol. 22 (2-4) , 120-131
Abstract
The drilling of deep holes with small diameters remains an unsatisfactory technology, since its productivity is rather limited. The main limit to an increase in productivity is directly related to the poor chip evacuation, which induces frequent tool breakage and poor surface quality. Retreat cycles and lubrication are common industrial solutions, but they induce productivity and environmental drawbacks. An alternative response to the chip evacuation problem is the use of a vibratory drilling head, which enables the chips to be fragmented thanks to the axial self-excited vibration. Contrary to conventional machining processes, axial drilling instability is sought, thanks to an adjustment of head design parameters and appropriate conditions of use. In this paper, self-vibratory cutting conditions are established through a specific stability lobes diagram. A dynamic high-speed spindle/drilling head/tool system model is elaborated on the basis of rotor dynamics predictions. The model-based tool tip Frequency Response Function (FRF) is integrated into an analytical stability approach. The torsional-axial coupling of the twist drill is investigated and consequences on drilling instability are established.Keywords
This publication has 8 references indexed in Scilit:
- Model-based operating recommendations for high-speed spindles equipped with a self-vibratory drilling headMechanism and Machine Theory, 2011
- A numerical simulator to predict the dynamical behavior of the self-vibratory drilling headInternational Journal of Machine Tools and Manufacture, 2008
- Model-based chatter stability prediction for high-speed spindlesInternational Journal of Machine Tools and Manufacture, 2007
- Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurementInternational Journal of Machine Tools and Manufacture, 2007
- Time domain simulation of torsional–axial vibrations in drillingInternational Journal of Machine Tools and Manufacture, 2006
- Stability-Based Spindle Design OptimizationJournal of Manufacturing Science and Engineering, 2006
- Theory of Torsional Chatter in Twist Drills: Model, Stability Analysis and Composition to TestJournal of Manufacturing Science and Engineering, 2000
- Calculation of main cutting edge forces and torque for drills with arbitrary point geometriesInternational Journal of Machine Tools and Manufacture, 1992