Residual Tensile Strength of the Multi-Impacted Scarf-Repaired Glass Fiber-Reinforced Polymer (GFRP) Composites
Open Access
- 22 November 2018
- Vol. 11 (12) , 2351
Abstract
The effect of multiple/repeated impacts on a repaired composite was investigated using a low-velocity impact test. The composite samples were fabricated through a vacuum resin infusion method (VARI) and repaired by a scarf repair technique. Later, a repeated low-velocity impact test was performed on the original and repaired composites samples. Performance of the multi-impacted repaired and original samples was evaluated and compared by measuring maximum contact force, maximum displacement, maximum time duration, absorbed energy and damage area. Photographs of the post-impacted samples were taken to observe the multi-impact damage progression through visual inspection. The results showed that each repeated impact subjected the samples to more damage. Tensile tests revealed that the scarf repair restored 81.23% strength. It was also observed that the sample obtained the highest damage dent in the low-velocity impact test that failed early during a tensile test and carried the lowest ultimate load.Keywords
This publication has 28 references indexed in Scilit:
- Bonded repair of composite aircraft structures: A review of scientific challenges and opportunitiesProgress in Aerospace Sciences, 2013
- Study of tensile failure mechanisms in scarf repaired CFRP laminatesInternational Journal of Adhesion and Adhesives, 2013
- Analysis of adhesively bonded repairs in composites: Damage detection and prognosisComposite Structures, 2013
- Strength Analysis of Composite Laminates with Penetrating Damage Repaired by Scarf Bonding MethodProcedia Engineering, 2011
- Compression-after-impact response of woven fiber-reinforced compositesComposites Science and Technology, 2010
- Low-velocity impact and residual tensile strength analysis to carbon fiber composite laminatesMaterials & Design (1980-2015), 2010
- Optimization of a composite scarf repair patch under tensile loadingComposites Part A: Applied Science and Manufacturing, 2009
- Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structureComposites Part A: Applied Science and Manufacturing, 2009
- On the design methodology of scarf repairs to composite laminatesComposites Science and Technology, 2008
- Tensile failure of adhesively bonded CFRP composite scarf jointsMaterials Science and Engineering: B, 2006