Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets
- 12 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
Abstract
Future high-field accelerator magnets foresee the extensive use of Nb 3 Sn, more expensive than the Nb-Ti of LHC. For projects involving the series production of magnets, conductor grading is mandatory in order to reduce the cost. To allow grading, a splice between higher and lower grade cables must be implemented. The internal splice option, i.e., embedded in the winding pack, is the one considered in this manuscript. The magnet technology is Wind&React (W&R). The target resistance is 1 nΩ at a background field of B≈10 T and ratio between operational and critical current I/I c ≈1/3, the one at which such Nb 3 Sn dipoles are expected to work. This manuscript reports progress on ultrasonically welded, soldered and diffusion-bonded splices. The feasibility studies on ultrasonic welding between Nb 3 Sn Rutherford cables and strands is presented. The potential corrosive effect of fluxing agents of impregnated soldered samples is examined. In the end, the design and test in SULTAN of bent diffusion-bonded splices is reported.Keywords
Funding Information
- European Organization for Nuclear Research (10832)
- EUROfusion Consortium and has received funding from the Euratom research and training programme (2019-2020, 633053, 2014-2018)
This publication has 13 references indexed in Scilit:
- Preliminary Tests of Soldered and Diffusion-Bonded Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator MagnetsIEEE Transactions on Applied Superconductivity, 2019
- Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSIIEEE Transactions on Applied Superconductivity, 2019
- Magnetic and Mechanical Design of a 16 T Common Coil Dipole for an FCCIEEE Transactions on Applied Superconductivity, 2018
- Development of MQXF: The Nb3Sn Low- $\beta$ Quadrupole for the HiLumi LHCIEEE Transactions on Applied Superconductivity, 2015
- Performance of the Short Model Coils Wound With the CERN 11-T Nb3Sn ConductorIEEE Transactions on Applied Superconductivity, 2014
- Qualification and Start of Production of the Ultrasonic Welding Machines for the LHC InterconnectionsIEEE Transactions on Applied Superconductivity, 2006
- Upgrade of operating range for SULTAN test facilityIEEE Transactions on Applied Superconductivity, 2002
- Effect of surface condition and bonding pressure on quality of diffusion bonded high purity copper for linear collider accelerator structuresScience and Technology of Welding and Joining, 2001
- Diffusion bonds in copperJournal of Materials Science, 1984
- The corrosion of stranded, tinned‐copper cable in aqueous zinc chloride fluxes containing ammonium chlorideJournal of Chemical Technology & Biotechnology, 1965