Analysis of the properties of orthotropic composites in terms of their use in airframe repairs
Open Access
- 1 January 2023
- journal article
- research article
- Published by Rzeszow University of Technology in Technologia i Automatyzacja Montażu
- Vol. 121 (3) , 3-12
Abstract
The aim of the research was to determine the basic strength properties of orthotropic composites in terms of their use in the repair of aircraft airframes. The objects of the tests were three types of composites reinforced with carbon fibers: produced using the wet method with a thickness of 2.5 mm, commercial with a thickness of 2 mm and commercial with a thickness of 7.3 mm. Specimens cut out from the first two types of materials were subjected to a static tensile test with a force applied in the direction of the fibers and at an angle of 45°, which enabled the determination of tensile strength and modulus of elasticity. Specimens made of 7.3 mm thick composite were subjected to four-point bending and tensile tests to determine Young's modulus, compression and impact strength, also taking into account two directions of load application. The values of stresses and Young's modulus determined in this way indicate much lower strength and stiffness of orthotropic composites apart from the reinforcement fibers’ directions, which is the basis for replacing them with quasi-isotropic composites in repairs of aircraft airframes.Keywords
This publication has 9 references indexed in Scilit:
- Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocityComposites Part B: Engineering, 2023
- The Use of CFRP for Structural Reinforcement—Literature ReviewMetals, 2022
- Mechanical Joining of Fibre Reinforced Polymer Composites to Metals—A Review. Part I: Bolted JoiningPolymers, 2020
- Quality monitoring and control for drilling of CFRP laminatesJournal of Manufacturing Processes, 2019
- A review on stress distribution, strength and failure of bolted composite joints2018
- Damage tolerance of carbon/flax hybrid composites subjected to low velocity impactComposites Part B: Engineering, 2016
- Defects and Damage in Composite Materials and Structures2014
- Basic Experimental Characterization of Polymer Matrix Composite MaterialsPolymer Reviews, 2013
- Composite Cutting with Abrasive Water JetProcedia Engineering, 2013