Explicit turn resolution with anisotropic homogenisation for efficient 3D magneto-thermal finite-element simulation of large-scale no-insulation HTS magnets
- 6 August 2026
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (8) , 085005
Abstract
No-insulation and metal–insulation high-temperature superconducting (HTS) magnets require three-dimensional (3D) models to describe the current distribution around critical current defects. However, 3D finite-element (FE) simulations with a mesh resolving every single turn are limited to small coils due to the high computational cost. In this work, we design and validate the EXTRA homogenisation method, standing for EXplicit Turn Resolution with Anisotropic homogenisation method. It allows 3D magneto-thermal simulations of large-scale magnets to be performed with high accuracy at a reasonable computational cost. The method combines the anisotropic homogenisation of turn-to-turn contact layers (T2TCLs) and their neighbouring winding turns with the explicit resolution of specific T2TCLs. In particular, the inner- and outermost winding turns and adjacent contact layers are explicitly resolved to properly describe the current distribution near current leads. In addition, the method is able to simulate local J c defects for a broad range of turn-to-turn contact resistances, provided the winding turns and T2TCLs next to the defect are explicitly resolved. For efficiency, the resolved T2TCLs are modelled using the surface contact approximation. The consistency of the proposed method is first verified on a 50-turn single pancake benchmark. It is shown to reproduce AC losses and temperature distributions obtained with a turn-resolved FE reference model, for both nominal operation and during thermal runaway. The computational efficiency of the EXTRA homogenisation method is demonstrated with the simulation of a stack of three 150-turn pancake coils, for which computation time is reduced by a factor of up to 13 with respect to a turn-resolved FE reference model. Finally, the results of a large-scale 3D FE simulation, currently out of reach of turn-resolved models, are provided for an insert HTS magnet with 10 000 turns. The EXTRA homogenisation method is open-source and input files to reproduce all results are made available.Keywords
All Related Versions
Funding Information
- CERN High-Field Magnet (HFM) program
- Fonds de la Recherche Scientifique -FNRS
- Waalse Gewest
- Fonds de la Recherche Scientifique de Belgique (2.5020.11)
- Consortium des Équipements de Calcul Intensif
This publication has 62 references indexed in Scilit:
- Screening currents increase thermal quench propagation speed in ultra-high-field REBCO magnetsResults in Engineering, 2026
- High-temperature superconductors and their large-scale applicationsNature Reviews Electrical Engineering, 2024
- 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnetNature, 2019
- Ramping turn-to-turn loss and magnetization loss of a No-Insulation (RE)Ba2Cu3Ox high temperature superconductor pancake coilJournal of Applied Physics, 2017
- Basic mechanism of self-healing from thermal runaway for uninsulated REBCO pancake coilsPhysica C: Superconductivity and its Applications, 2014
- Calculation of alternating current losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applicationsJournal of Applied Physics, 2013
- The normal-zone propagation properties of the non-insulated HTS coil in cryocooled operationPhysica C: Superconductivity and its Applications, 2011
- Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilitiesInternational Journal for Numerical Methods in Engineering, 2009
- CUDI: A model for calculation of electrodynamic and thermal behaviour of superconducting Rutherford cablesCryogenics, 2006
- Reel-to-reel critical current measurement of coated conductorsSuperconductor Science and Technology, 2004