Christophe Geuzaine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christophe Geuzaine has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Benoît Vanderheyden
University of Liège
14 shared publications - Julien Dular
University of Liège
10 shared publications - Louis Denis
University of Liège
8 shared publications - Xavier Antoine
Institut Elie Cartan de Lorraine, Université de Lorraine, Vandoeuvre-lès-Nancy Cedex, France
7 shared publications - Mariusz Wozniak
CERN
6 shared publications - François Henrotte
Institut Montefiore – ACE Université de Liège Liège Belgium
5 shared publications
Latest Publications
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115012
Current patterns and loss contributions in single-layer CORT cables carrying AC current
Conductor-on-round-tube (CORT) cables are a potential solution for carrying AC power in a small cross-section. Due to the geometry of the cable and the helical arrangement of the coated conductors (CC), the current follows a non-trivial pattern inside each CC. For instance, for the case of a single-layer cable, the current flow is mostly axial along the outer face of the conductors and mostly azimuthal along their inner face. Such a current distribution, known as the Garber current pattern , affects the transport AC losses. In numerical models, commonly adopted simplifications are either based on straight conductors or infinitely thin CCs. Such approaches neglect the Garber current pattern and thus misrepresent both the detailed current flow within the CC and the resulting 3D distribution of the fields. In this work, the detailed 3D current distribution in the CCs is investigated in a single-layer CORT cable, as a function of the cable geometrical parameters such as the conductor thickness, the pitch angle, and the gap between adjacent CCs. In particular, the impact of the Garber current pattern is studied on the two largest contributions to the AC losses, namely the surface losses and the edge losses. The detailed distribution of the currents in the CCs is examined and its relationship with the different AC loss mechanisms is established. This study is carried out by means of an effective 2D model that uses a system of coordinates conforming with the helical structure of the cable. The model uses a power-law electrical resistivity and for a power index n = 25 reproduces the AC losses predictions from critical state models to within 46% for vanishing gaps and less than 8% for straight cables. Calculated AC losses converge to the critical state predictions as the value of n is increased.
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115012
Current patterns and loss contributions in single-layer CORT cables carrying AC current
Conductor-on-round-tube (CORT) cables are a potential solution for carrying AC power in a small cross-section. Due to the geometry of the cable and the helical arrangement of the coated conductors (CC), the current follows a non-trivial pattern inside each CC. For instance, for the case of a single-layer cable, the current flow is mostly axial along the outer face of the conductors and mostly azimuthal along their inner face. Such a current distribution, known as the Garber current pattern , affects the transport AC losses. In numerical models, commonly adopted simplifications are either based on straight conductors or infinitely thin CCs. Such approaches neglect the Garber current pattern and thus misrepresent both the detailed current flow within the CC and the resulting 3D distribution of the fields. In this work, the detailed 3D current distribution in the CCs is investigated in a single-layer CORT cable, as a function of the cable geometrical parameters such as the conductor thickness, the pitch angle, and the gap between adjacent CCs. In particular, the impact of the Garber current pattern is studied on the two largest contributions to the AC losses, namely the surface losses and the edge losses. The detailed distribution of the currents in the CCs is examined and its relationship with the different AC loss mechanisms is established. This study is carried out by means of an effective 2D model that uses a system of coordinates conforming with the helical structure of the cable. The model uses a power-law electrical resistivity and for a power index n = 25 reproduces the AC losses predictions from critical state models to within 46% for vanishing gaps and less than 8% for straight cables. Calculated AC losses converge to the critical state predictions as the value of n is increased.
- 6 August 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (8) , 085005
Explicit turn resolution with anisotropic homogenisation for efficient 3D magneto-thermal finite-element simulation of large-scale no-insulation HTS magnets
No-insulation and metal–insulation high-temperature superconducting (HTS) magnets require three-dimensional (3D) models to describe the current distribution around critical current defects. However, 3D finite-element (FE) simulations with a mesh resolving every single turn are limited to small coils due to the high computational cost. In this work, we design and validate the EXTRA homogenisation method, standing for EXplicit Turn Resolution with Anisotropic homogenisation method. It allows 3D magneto-thermal simulations of large-scale magnets to be performed with high accuracy at a reasonable computational cost. The method combines the anisotropic homogenisation of turn-to-turn contact layers (T2TCLs) and their neighbouring winding turns with the explicit resolution of specific T2TCLs. In particular, the inner- and outermost winding turns and adjacent contact layers are explicitly resolved to properly describe the current distribution near current leads. In addition, the method is able to simulate local J c defects for a broad range of turn-to-turn contact resistances, provided the winding turns and T2TCLs next to the defect are explicitly resolved. For efficiency, the resolved T2TCLs are modelled using the surface contact approximation. The consistency of the proposed method is first verified on a 50-turn single pancake benchmark. It is shown to reproduce AC losses and temperature distributions obtained with a turn-resolved FE reference model, for both nominal operation and during thermal runaway. The computational efficiency of the EXTRA homogenisation method is demonstrated with the simulation of a stack of three 150-turn pancake coils, for which computation time is reduced by a factor of up to 13 with respect to a turn-resolved FE reference model. Finally, the results of a large-scale 3D FE simulation, currently out of reach of turn-resolved models, are provided for an insert HTS magnet with 10 000 turns. The EXTRA homogenisation method is open-source and input files to reproduce all results are made available.
- 6 August 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (8) , 085005
Explicit turn resolution with anisotropic homogenisation for efficient 3D magneto-thermal finite-element simulation of large-scale no-insulation HTS magnets
No-insulation and metal–insulation high-temperature superconducting (HTS) magnets require three-dimensional (3D) models to describe the current distribution around critical current defects. However, 3D finite-element (FE) simulations with a mesh resolving every single turn are limited to small coils due to the high computational cost. In this work, we design and validate the EXTRA homogenisation method, standing for EXplicit Turn Resolution with Anisotropic homogenisation method. It allows 3D magneto-thermal simulations of large-scale magnets to be performed with high accuracy at a reasonable computational cost. The method combines the anisotropic homogenisation of turn-to-turn contact layers (T2TCLs) and their neighbouring winding turns with the explicit resolution of specific T2TCLs. In particular, the inner- and outermost winding turns and adjacent contact layers are explicitly resolved to properly describe the current distribution near current leads. In addition, the method is able to simulate local J c defects for a broad range of turn-to-turn contact resistances, provided the winding turns and T2TCLs next to the defect are explicitly resolved. For efficiency, the resolved T2TCLs are modelled using the surface contact approximation. The consistency of the proposed method is first verified on a 50-turn single pancake benchmark. It is shown to reproduce AC losses and temperature distributions obtained with a turn-resolved FE reference model, for both nominal operation and during thermal runaway. The computational efficiency of the EXTRA homogenisation method is demonstrated with the simulation of a stack of three 150-turn pancake coils, for which computation time is reduced by a factor of up to 13 with respect to a turn-resolved FE reference model. Finally, the results of a large-scale 3D FE simulation, currently out of reach of turn-resolved models, are provided for an insert HTS magnet with 10 000 turns. The EXTRA homogenisation method is open-source and input files to reproduce all results are made available.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Acceleration of Multi-Scale LTS Magnet Simulations With Neural Network Surrogate Models
While the prediction of AC losses during transients is critical for designing large-scale low-temperature supercon ducting (LTS) magnets, brute-force finite-element (FE) simulation of their detailed geometry down to the length scale of the conductors is a computational challenge. Multi-scale methods, balancing between a coarse approximation of the fields at the scale of the magnet and a detailed description at the scale of the conductors, are promising approaches to reduce the computational load while keeping a sufficient accuracy. In this work, we introduce a neural network approach to ac celerate multi-scale magneto-thermal simulations of LTS magnets by replacing costly single-turn FE models with neural network surrogates. The neural network architecture is presented and discussed, together with an automated procedure for generating simulation data for its training. The resulting accelerated multi scale model is used to simulate current ramp-up procedures for the IBA S2C2 magnet. The surrogate-based multi-scale model is compared with a conventional multi-scale model based on a composite wire-in-channel FE model. The surrogate model is shown to reproduce single-turn filament hysteresis, inter-filament coupling, and eddy losses, while the computational time of the multi-scale method is reduced by a factor of 800.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Acceleration of Multi-Scale LTS Magnet Simulations With Neural Network Surrogate Models
While the prediction of AC losses during transients is critical for designing large-scale low-temperature supercon ducting (LTS) magnets, brute-force finite-element (FE) simulation of their detailed geometry down to the length scale of the conductors is a computational challenge. Multi-scale methods, balancing between a coarse approximation of the fields at the scale of the magnet and a detailed description at the scale of the conductors, are promising approaches to reduce the computational load while keeping a sufficient accuracy. In this work, we introduce a neural network approach to ac celerate multi-scale magneto-thermal simulations of LTS magnets by replacing costly single-turn FE models with neural network surrogates. The neural network architecture is presented and discussed, together with an automated procedure for generating simulation data for its training. The resulting accelerated multi scale model is used to simulate current ramp-up procedures for the IBA S2C2 magnet. The surrogate-based multi-scale model is compared with a conventional multi-scale model based on a composite wire-in-channel FE model. The surrogate model is shown to reproduce single-turn filament hysteresis, inter-filament coupling, and eddy losses, while the computational time of the multi-scale method is reduced by a factor of 800.
- 26 January 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 113 (1)
Solving Helmholtz problems with finite elements on a quantum annealer
- 26 January 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 113 (1)
Solving Helmholtz problems with finite elements on a quantum annealer
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-7
Simultaneous Multi-Scale Homogeneous H-Phi Thin-Shell Model for Efficient Simulations of Stacked HTS Coils
The simulation of large-scale high-temperature su perconducting (HTS) magnets is a computational challenge due to the multiple spatial scales involved, from the magnet to the detailed turn-to-turn geometry. To reduce the computational cost associated with finite-element (FE) simulations of insulated HTS coils, the simultaneous multi-scale homogeneous (SMSH) method can be considered. It combines a macroscopic-scale homogenized magnet model with multiple single-tape models and solves both scales monolithically. In this work, the SMSH method is reformulated using the h-φ thin-shell (TS) approximation, where analyzed tapes are collapsed into thin surfaces, simplifying mesh generation. Moreover, the magnetic field is expressed as the gradient of the magnetic scalar potential outside the analyzed tapes. The discretized field is then described with nodal functions, further reducing the size of the FE problem compared to standard h formulations. The proposed h-φ SMSH-TS method is verified against state-of-the-art homogenization methods on a 2-D benchmark problem of stacks of HTS tapes. The results show good agreement in terms of AC losses, turn voltage and local current density, with a significant reduction in simulation time compared to reference models. All models are open-source.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-7
Simultaneous Multi-Scale Homogeneous H-Phi Thin-Shell Model for Efficient Simulations of Stacked HTS Coils
The simulation of large-scale high-temperature su perconducting (HTS) magnets is a computational challenge due to the multiple spatial scales involved, from the magnet to the detailed turn-to-turn geometry. To reduce the computational cost associated with finite-element (FE) simulations of insulated HTS coils, the simultaneous multi-scale homogeneous (SMSH) method can be considered. It combines a macroscopic-scale homogenized magnet model with multiple single-tape models and solves both scales monolithically. In this work, the SMSH method is reformulated using the h-φ thin-shell (TS) approximation, where analyzed tapes are collapsed into thin surfaces, simplifying mesh generation. Moreover, the magnetic field is expressed as the gradient of the magnetic scalar potential outside the analyzed tapes. The discretized field is then described with nodal functions, further reducing the size of the FE problem compared to standard h formulations. The proposed h-φ SMSH-TS method is verified against state-of-the-art homogenization methods on a 2-D benchmark problem of stacks of HTS tapes. The results show good agreement in terms of AC losses, turn voltage and local current density, with a significant reduction in simulation time compared to reference models. All models are open-source.
- Open Access
Variational quantum algorithm for solving Helmholtz problems with high order finite elements
Discretizing Helmholtz problems via finite elements yields linear systems whose efficient solution remains a major challenge for classical computation. In this paper, we investigate how variational quantum algorithms could address this challenge. We first show that, for regular meshes, a block encoding of the operators $A$ and $A^\dagger A$ arising from the high-order finite element discretisation of Helmholtz problems can be designed, resulting in a quantum circuit of depth $\mathcal{O}(p^3\mathrm{poly}\log(Np))$ with $N$ the number of elements and $p$ the order of the finite elements. Then we apply our algorithm to a one-dimensional Helmholtz problem with Dirichlet and Neumann boundary conditions for various wavenumbers.Open AccessVariational quantum algorithm for solving Helmholtz problems with high order finite elements
Discretizing Helmholtz problems via finite elements yields linear systems whose efficient solution remains a major challenge for classical computation. In this paper, we investigate how variational quantum algorithms could address this challenge. We first show that, for regular meshes, a block encoding of the operators $A$ and $A^\dagger A$ arising from the high-order finite element discretisation of Helmholtz problems can be designed, resulting in a quantum circuit of depth $\mathcal{O}(p^3\mathrm{poly}\log(Np))$ with $N$ the number of elements and $p$ the order of the finite elements. Then we apply our algorithm to a one-dimensional Helmholtz problem with Dirichlet and Neumann boundary conditions for various wavenumbers. - 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (8) , 1-7
Magnetic Field Conforming Formulations for Foil Windings
We extend the foil winding homogenization method to magnetic field conforming formulations.We first propose a full magnetic field foil winding formulation by analogy with magnetic flux density conforming formulations.We then introduce the magnetic scalar potential in non-conducting regions to improve the efficiency of the model. This leads to a significant reduction in the number of degrees of freedom, particularly in 3-D applications. The proposed models are verified on two frequency-domain benchmark problems: a 2-D axisymmetric problem and a 3-D problem. They reproduce results obtained with magnetic flux density conforming formulations and with resolved conductor models that explicitly discretize all turns. Moreover, the models are applied in the transient simulation of a high-temperature superconducting coil. In all investigated configurations, the proposed models provide reliable results while considerably reducing the size of the numerical problem to be solved.
- 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (8) , 1-7
Magnetic Field Conforming Formulations for Foil Windings
We extend the foil winding homogenization method to magnetic field conforming formulations.We first propose a full magnetic field foil winding formulation by analogy with magnetic flux density conforming formulations.We then introduce the magnetic scalar potential in non-conducting regions to improve the efficiency of the model. This leads to a significant reduction in the number of degrees of freedom, particularly in 3-D applications. The proposed models are verified on two frequency-domain benchmark problems: a 2-D axisymmetric problem and a 3-D problem. They reproduce results obtained with magnetic flux density conforming formulations and with resolved conductor models that explicitly discretize all turns. Moreover, the models are applied in the transient simulation of a high-temperature superconducting coil. In all investigated configurations, the proposed models provide reliable results while considerably reducing the size of the numerical problem to be solved.
- Open Access
Comparison of substructured non-overlapping domain decomposition and overlapping additive Schwarz methods for large-scale Helmholtz problems with multiple sources
Solving large-scale Helmholtz problems discretized with high-order finite elements is notoriously difficult, especially in 3D where direct factorization of the system matrix is very expensive and memory demanding, and robust convergence of iterative methods is difficult to obtain. Domain decomposition methods (DDM) constitute one of the most promising strategy so far, by combining direct and iterative approaches: using direct solvers on overlapping or non-overlapping subdomains, as a preconditioner for a Krylov subspace method on the original Helmholtz system or as an iterative solver on a substructured problem involving field values or Lagrange multipliers on the interfaces between the subdomains. In this work we compare the computational performance of non-overlapping substructured DDM and Optimized Restricted Additive Schwarz (ORAS) preconditioners for solving large-scale Helmholtz problems with multiple sources, as is encountered, e.g., in frequency-domain Full Waveform Inversion. We show on a realistic geophysical test-case that, when appropriately tuned, the non-overlapping methods can reduce the convergence gap sufficiently to significantly outperform the overlapping methods.
Open AccessComparison of substructured non-overlapping domain decomposition and overlapping additive Schwarz methods for large-scale Helmholtz problems with multiple sources
Solving large-scale Helmholtz problems discretized with high-order finite elements is notoriously difficult, especially in 3D where direct factorization of the system matrix is very expensive and memory demanding, and robust convergence of iterative methods is difficult to obtain. Domain decomposition methods (DDM) constitute one of the most promising strategy so far, by combining direct and iterative approaches: using direct solvers on overlapping or non-overlapping subdomains, as a preconditioner for a Krylov subspace method on the original Helmholtz system or as an iterative solver on a substructured problem involving field values or Lagrange multipliers on the interfaces between the subdomains. In this work we compare the computational performance of non-overlapping substructured DDM and Optimized Restricted Additive Schwarz (ORAS) preconditioners for solving large-scale Helmholtz problems with multiple sources, as is encountered, e.g., in frequency-domain Full Waveform Inversion. We show on a realistic geophysical test-case that, when appropriately tuned, the non-overlapping methods can reduce the convergence gap sufficiently to significantly outperform the overlapping methods.