Optimal tool path searching and tool selection for machining of complex surfaces
- 1 June 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This article deals with the calculation of curvature of free-surfaces for the use in processes of machining. The calculation is realized in Matlab environment. Objects with free-surfaces are mainly used in machine engineering, design, automotive and aerospace industry etc. The manufacturing of such surfaces are realized on multi-axes machining centres, where the tool path controlling is crucial process. It is necessary to ensure collisionfree states between tool and workpiece as well as between tool and peripheral shape of machined surface. It is described in this article how the surface imported into Matlab is divided into different areas. The criteria of the division is based on Gaussian curvature of a surface. Such areas of the surface are then possible to machine by an optimal tool with optimal radius that is obtained from the curvature calculation. All these calculations are done in Matlab and results are verified by practical machining on the 5-axis machining centre. The machining of the whole surface by one tool was compared to machining of divided areas by different tools. The impact on the length of tool paths during the machining process is summarized in conclusion.Keywords
This publication has 12 references indexed in Scilit:
- Cutting Tool Combination and Machining Strategy Affectation Based on the Determination of Local Shapes for Free Form Surfaces2008
- Penetration–elimination method for five-axis CNC machining of sculptured surfacesInternational Journal of Machine Tools and Manufacture, 2007
- Three-half and half-axis patch-by-patch NC machining of sculptured surfacesThe International Journal of Advanced Manufacturing Technology, 2005
- Cutter selection for 5-axis milling based on surface decomposition2005
- Arc-intersect method for 5-axis tool positioningComputer-Aided Design, 2005
- Iso-scallop tool path generation in 5-axis millingThe International Journal of Advanced Manufacturing Technology, 2004
- Automated surface subdivision and tool path generation for -axis CNC machining of sculptured partsComputers in Industry, 2003
- Tool selection for five-axis curvature matched machiningComputer-Aided Design, 2002
- On local gouging in five-axis sculptured surface machining using flat-end toolsComputer-Aided Design, 2000
- 2-Phase approach to global tool interference avoidance in 5-axis machiningComputer-Aided Design, 1995