Martin Lachman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martin Lachman has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Jiří Šafka
The Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentská 1402/2, 461 17 Liberec, Czech Republic
5 shared publications - Petr Zelený
Faculty of Mechanical Engineering, Technical University of Liberec, 461 17 Liberec, Czech Republic
3 shared publications Michal Ackermann
Technical University of Liberec
2 shared publicationsFilip Veselka
Technical University of Liberec
1 shared publicationJan Hudec
Research Center of Manufacturing Technology, Czech Technical University in Prague
1 shared publicationJan Koprnicky
Institute of Mechatronics and Computer Engineering Faculty of Mechatronics, Technical University of Liberec Liberec, Czech Republic
1 shared publication
Latest Publications
- 1 April 2018
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 919, 222-229
Rapid Prototyping Technology for Special Pressure Vessels
The article deals with the topic of 3D printing of pressure vessels and their testing. The main focus of the research was on a 3D model of the pressure vessel, which was originally designed for a student formula racing car project. The described virtual 3D model was designed with regard to 3D printing. The physical model was manufactured using several additive manufacturing technologies. The first technology was FDM using ULTEM 1010 material. The next technology was SLS (Selective Laser Sintering) using polyamide materials (PA3200GF and PA2220). The last technology was SLA (Stereolithography) using a polypropylene material (Durable). Experimental evaluation of the vessels was carried out by a pressure test, which verified the compactness of the 3D printed parts and their possible porosity. At the end of the article, a comparison of each printed model is made in terms of their final price and weight, together with pressure and thermal resistance.
- 1 April 2018
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 919, 222-229
Rapid Prototyping Technology for Special Pressure Vessels
The article deals with the topic of 3D printing of pressure vessels and their testing. The main focus of the research was on a 3D model of the pressure vessel, which was originally designed for a student formula racing car project. The described virtual 3D model was designed with regard to 3D printing. The physical model was manufactured using several additive manufacturing technologies. The first technology was FDM using ULTEM 1010 material. The next technology was SLS (Selective Laser Sintering) using polyamide materials (PA3200GF and PA2220). The last technology was SLA (Stereolithography) using a polypropylene material (Durable). Experimental evaluation of the vessels was carried out by a pressure test, which verified the compactness of the 3D printed parts and their possible porosity. At the end of the article, a comparison of each printed model is made in terms of their final price and weight, together with pressure and thermal resistance.
- 2 September 2017
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 756, 71-79
Experimental Determination of the Focal Length of a Laser Beam from the Output Nozzle of a Laser Cutting Head
Laser technologies are considered to be unconventional technologies. Laser cutting is one of the most popular industrial operations that use a laser beam. Fibre lasers are most commonly used for cutting metallic materials. The aim of this paper is to experimentally demonstrate a procedure for determining the focal length of a laser beam from the output of the cutting head of a JK400FL fibre laser. Along with other factors, the correct position of the focal point of a laser beam cutting materials, plays a vital role in the quality of the cut and also in determining the cutting speed. It is possible to use a higher cutting speed of the laser machine, without compromising the quality of the cut.
- 2 September 2017
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 756, 71-79
Experimental Determination of the Focal Length of a Laser Beam from the Output Nozzle of a Laser Cutting Head
Laser technologies are considered to be unconventional technologies. Laser cutting is one of the most popular industrial operations that use a laser beam. Fibre lasers are most commonly used for cutting metallic materials. The aim of this paper is to experimentally demonstrate a procedure for determining the focal length of a laser beam from the output of the cutting head of a JK400FL fibre laser. Along with other factors, the correct position of the focal point of a laser beam cutting materials, plays a vital role in the quality of the cut and also in determining the cutting speed. It is possible to use a higher cutting speed of the laser machine, without compromising the quality of the cut.
- Open Access
- 9 December 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 89, 01009
Measuring frequency and transient characteristics on Yaskawa Motor and controlling the motor by means of PC
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- 9 December 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 89, 01009
Open AccessMeasuring frequency and transient characteristics on Yaskawa Motor and controlling the motor by means of PC
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- Open Access
- 29 January 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 40, 02025
Stability Simulation of a Vehicle with Wheel Active Steering
This paper deals with the possibility of increasing the vehicle driving stability at a higher speed. One of the ways how to achieve higher stability is using the 4WS system. Mathematical description of vehicle general movement is a very complex task. For simulation, models which are aptly simplified are used. For the first approach, so-called single-truck vehicle model (often linear) is usually used. For the simulation, we have chosen to extend the model into a two-truck one, which includes the possibility to input more vehicle parameters. Considering the 4WS system, it is possible to use a number of potential regulations. In our simulation model, the regulation system with compound coupling was used. This type of regulation turns the rear wheels depending on the input parameters of the system (steering angle of the front wheels) and depending on the output moving quantities of the vehicle, most frequently the yaw rate. Criterion for compensation of lateral deflection centre of gravity angle is its zero value, or more precisely the zero value of its first-order derivative. Parameters and setup of the simulation model were done in conjunction with the dSAPACE software. Reference performances of the vehicle simulation model were made through the defined manoeuvres. But the simulation results indicate that the rear-wheels steering can have a positive effect on the vehicle movement stability, especially when changing the driving direction at high speed.
- 29 January 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 40, 02025
Open AccessStability Simulation of a Vehicle with Wheel Active Steering
This paper deals with the possibility of increasing the vehicle driving stability at a higher speed. One of the ways how to achieve higher stability is using the 4WS system. Mathematical description of vehicle general movement is a very complex task. For simulation, models which are aptly simplified are used. For the first approach, so-called single-truck vehicle model (often linear) is usually used. For the simulation, we have chosen to extend the model into a two-truck one, which includes the possibility to input more vehicle parameters. Considering the 4WS system, it is possible to use a number of potential regulations. In our simulation model, the regulation system with compound coupling was used. This type of regulation turns the rear wheels depending on the input parameters of the system (steering angle of the front wheels) and depending on the output moving quantities of the vehicle, most frequently the yaw rate. Criterion for compensation of lateral deflection centre of gravity angle is its zero value, or more precisely the zero value of its first-order derivative. Parameters and setup of the simulation model were done in conjunction with the dSAPACE software. Reference performances of the vehicle simulation model were made through the defined manoeuvres. But the simulation results indicate that the rear-wheels steering can have a positive effect on the vehicle movement stability, especially when changing the driving direction at high speed.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Optimal tool path searching and tool selection for machining of complex surfaces
This article deals with the calculation of curvature of free-surfaces for the use in processes of machining. The calculation is realized in Matlab environment. Objects with free-surfaces are mainly used in machine engineering, design, automotive and aerospace industry etc. The manufacturing of such surfaces are realized on multi-axes machining centres, where the tool path controlling is crucial process. It is necessary to ensure collisionfree states between tool and workpiece as well as between tool and peripheral shape of machined surface. It is described in this article how the surface imported into Matlab is divided into different areas. The criteria of the division is based on Gaussian curvature of a surface. Such areas of the surface are then possible to machine by an optimal tool with optimal radius that is obtained from the curvature calculation. All these calculations are done in Matlab and results are verified by practical machining on the 5-axis machining centre. The machining of the whole surface by one tool was compared to machining of divided areas by different tools. The impact on the length of tool paths during the machining process is summarized in conclusion.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Optimal tool path searching and tool selection for machining of complex surfaces
This article deals with the calculation of curvature of free-surfaces for the use in processes of machining. The calculation is realized in Matlab environment. Objects with free-surfaces are mainly used in machine engineering, design, automotive and aerospace industry etc. The manufacturing of such surfaces are realized on multi-axes machining centres, where the tool path controlling is crucial process. It is necessary to ensure collisionfree states between tool and workpiece as well as between tool and peripheral shape of machined surface. It is described in this article how the surface imported into Matlab is divided into different areas. The criteria of the division is based on Gaussian curvature of a surface. Such areas of the surface are then possible to machine by an optimal tool with optimal radius that is obtained from the curvature calculation. All these calculations are done in Matlab and results are verified by practical machining on the 5-axis machining centre. The machining of the whole surface by one tool was compared to machining of divided areas by different tools. The impact on the length of tool paths during the machining process is summarized in conclusion.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 231-236
Properties of Models Produced by Direct Selective Laser Melting Technology
The paper deals with evaluation of selected mechanical properties of tensile test specimens which were made from AlSi12 material by Direct Selective Laser Melting (DSLM) technology. Specimens were built in three various set-ups such as different angles towards building platform and various types of supporting structures in order to prove the influence of these parameters to mechanical properties of resulting product. The specimens were also subjected to material tests to reveal its inner structure, quality of a grain and chemical composition of the material. As a conclusion, the selection of the most suitable supporting structure and alignment of a model towards building platform are discussed. Mechanical parameters evaluated from tensile tests such as Young’s modulus (E), 0.2% proof stress (Re0,2) and tensile strength (Rm) are compared with values typical for the selected material AlSi12.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 231-236
Properties of Models Produced by Direct Selective Laser Melting Technology
The paper deals with evaluation of selected mechanical properties of tensile test specimens which were made from AlSi12 material by Direct Selective Laser Melting (DSLM) technology. Specimens were built in three various set-ups such as different angles towards building platform and various types of supporting structures in order to prove the influence of these parameters to mechanical properties of resulting product. The specimens were also subjected to material tests to reveal its inner structure, quality of a grain and chemical composition of the material. As a conclusion, the selection of the most suitable supporting structure and alignment of a model towards building platform are discussed. Mechanical parameters evaluated from tensile tests such as Young’s modulus (E), 0.2% proof stress (Re0,2) and tensile strength (Rm) are compared with values typical for the selected material AlSi12.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 225-230
Dividing the Complicated General Shapes of the Surface into Partial Elements According to Curvature (Gauss and Maximal Curvature) and its Multi-Axis Machining
The paper deals with multi-axis machining of complex shapes of freeform surfaces. Machining of such surfaces is very difficult and the critical operation is the optimal setting of tilt and lead angle which, along with other parameters, must ensure collision-free machining. This paper describes the possible dividing of solved freeform surface areas into partial elements with similar properties from CAD data using Matlab software instruments. The partition is solved by algorithms calculated according to the curvature of the surface using both methods the maximum and the Gaussian curvature. These partial elements can be machined separately which allows employment of tools with optimal dimensions for individual elements. This process enables significant reduction of tool-path necessary for machining these shapes which also leads to reduction of the working time. Furthermore, there are practical examples including a comparison of standard method and the use of machining process optimized by the algorithm in this article.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 225-230
Dividing the Complicated General Shapes of the Surface into Partial Elements According to Curvature (Gauss and Maximal Curvature) and its Multi-Axis Machining
The paper deals with multi-axis machining of complex shapes of freeform surfaces. Machining of such surfaces is very difficult and the critical operation is the optimal setting of tilt and lead angle which, along with other parameters, must ensure collision-free machining. This paper describes the possible dividing of solved freeform surface areas into partial elements with similar properties from CAD data using Matlab software instruments. The partition is solved by algorithms calculated according to the curvature of the surface using both methods the maximum and the Gaussian curvature. These partial elements can be machined separately which allows employment of tools with optimal dimensions for individual elements. This process enables significant reduction of tool-path necessary for machining these shapes which also leads to reduction of the working time. Furthermore, there are practical examples including a comparison of standard method and the use of machining process optimized by the algorithm in this article.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 195-200
Prototype CNC Machine for Laser Cutting of Sheet Metal
The research activities of the Department of Manufacturing Systems at TU of Liberec are related to projecting, designing and construction of prototype CNC machines for laser cutting. The result is a prototype device assembled of standard aluminium profiles using the motion control linear actuator with ball screw.The paper presents the design and construction of the prototype machine. The components and their assembly are described below. The implementation of technical parameters and other options outlined the continued development and application of the equipment is also listed below.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 693, 195-200
Prototype CNC Machine for Laser Cutting of Sheet Metal
The research activities of the Department of Manufacturing Systems at TU of Liberec are related to projecting, designing and construction of prototype CNC machines for laser cutting. The result is a prototype device assembled of standard aluminium profiles using the motion control linear actuator with ball screw.The paper presents the design and construction of the prototype machine. The components and their assembly are described below. The implementation of technical parameters and other options outlined the continued development and application of the equipment is also listed below.