Nonlinear Model Establishment and Experimental Verification of a Pneumatic Rotary Actuator Position Servo System
Open Access
Abstract
In order to accurately reflect the characteristics and motion states of a pneumatic rotary actuator position servo system, an accurate non-linear model of the valve-controlled actuator system is proposed, and its parameter identification and experimental verification are carried out. Firstly, in the modeling of this system, the mass flow rate of the gas flowing through each port of the proportional directional control valve is derived by taking into account the clearance between the valve spool and the sleeve, the heat transfer formula is used to the derivation of the energy equation, and the Stribeck model is applied to the friction model of the pneumatic rotary actuator. Then, the flow coefficient, the heat transfer coefficient and the friction parameters are identified by the model and pneumatic test circuits. After the verification experiment of the mass flow rate equations, the charging and discharging experiment reveals that the model can clearly show the effect of clearances on gas pressure changes and describe the effect of heat transfer on gas temperature changes. Finally, the results of model verification indicate that the simulation curves of rotation angle and two-chamber pressures are consistent with their experimental values, and the non-linear model shows high accuracy.Keywords
Funding Information
- National Youth Foundation Project (51705297)
- Fundamental Research Funds for Henan Province Colleges and Universities (NSFRF140120)
- Henan Province Science and Technology Key Project (172102310674)
- Doctor Foundation of Henan Polytechnic University (B2012-101)
This publication has 17 references indexed in Scilit:
- A review on recent research trends in servo pneumatic positioning systemsPrecision Engineering, 2017
- Energy conversion characteristics of a hydropneumatic transformer in a sustainable-energy vehicleApplied Energy, 2016
- Overall life cycle comprehensive assessment of pneumatic and electric actuatorChinese Journal of Mechanical Engineering, 2014
- Study on Friction Characteristics of Energizing Pneumatic CylindersAdvanced Materials Research, 2014
- Design of a Hydraulic Motor System Driven by Compressed AirEnergies, 2013
- Wavelet-based adaptive sliding-mode control with H ∞ tracking performance for pneumatic servo system position tracking controlIET Control Theory & Applications, 2012
- Modelling and identification of industrial pneumatic drive systemThe International Journal of Advanced Manufacturing Technology, 2011
- Nonlinear Mathematical Modeling in Pneumatic Servo Position ApplicationsMathematical Problems in Engineering, 2011
- Friction Chatter-compensation Based on Stribeck ModelJournal of Mechanical Engineering, 2010
- Heat transfer evaluation of industrial pneumatic cylindersProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2007