Atomic layer etching of SiCO films with surface modification by O2 and CF4/NH3/Ar plasmas and desorption by IR annealing
- 7 June 2024
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Abstract
Thermal atomic layer etching (ALE) is one promising method to achieve atomic level precision and high conformality over three-dimensional structures that can further enable the manufacturing of gate-all-around devices. Initially, an ALE process using CF4/NH3/Ar remote plasma exposure followed by infrared (IR) annealing was studied on SiCO films. The process showed self-limiting behavior and achieved an etch per cycle (EPC) of 0.2 nm/cycle. To increase the EPC, an O2 remote plasma exposure step was added before the CF4/NH3/Ar plasma exposure step in the ALE cycle. The process achieved an EPC of 1.0 nm/cycle. Measurements of the EPC of the SiCO film showed self-limiting behavior in both the O2 and CF4/NH3/Ar steps. X-ray photoelectron spectroscopy results showed an increase in atomic concentration (AC) of oxygen while the AC of carbon decreased following the exposure of the film to an O2 remote plasma. The results indicate that methyl groups (-CH3) in the top layers of the film are being replaced by hydroxyl (-OH) groups and Si-O-Si bonding. The N1s spectrum showed the formation of an ammonium fluorosilicate (NH4)2SiF6-based surface-modified layer following exposure to a CF4/NH3/Ar remote plasma. IR annealing of the film showed desorption of the ammonium fluorosilicate surface-modified layer and the return to an as grown SiCO film surface composition.Keywords
This publication has 22 references indexed in Scilit:
- Hybrid low‐ k spacer scheme for advanced FinFET technology parasitic capacitance reductionElectronics Letters, 2020
- Characteristics of low-κ SiOC films deposited via atomic layer depositionThin Solid Films, 2018
- Thermal Atomic Layer Etching of SiO2 by a “Conversion-Etch” Mechanism Using Sequential Reactions of Trimethylaluminum and Hydrogen FluorideACS Applied Materials & Interfaces, 2017
- Investigation of oxide layer removal mechanism using reactive gasesMicroelectronic Engineering, 2015
- Considerations for Ultimate CMOS ScalingIEEE Transactions on Electron Devices, 2012
- Atomic Layer Deposition: An OverviewChemical Reviews, 2009
- Mechanisms of porous dielectric film modification induced by reducing and oxidizing ash plasmasJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2007
- Comparative study of SiOCH low-k films with varied porosity interacting with etching and cleaning plasmaJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Eliminating dielectric degradation of low-k organosilicate glass by trimethylchlorosilane treatmentJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Damage-free selective etching of Si native oxides using NH3/NF3 and SF6/H2O down-flow etchingJournal of Applied Physics, 1993