Hiroyuki Kobayashi
Research Subjects
Hiroyuki Kobayashi has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Takashi Ohno
2 shared publications- Yusuke Okawa
Department of Materials Science, Chiba University, 1-33 Yayoicho, Inageku, Chiba 263-8522, Japan
2 shared publications - Akihiro Homma
Department of Otolaryngology-Head & Neck Surgery, Faculty of Medicine and Graduate School of Medicine, Hokkaido University, Kita-Ku, N15W7, Sapporo 0608638, Hokkaido, Japan
1 shared publication - Emi Takakuwa
Department of Surgical Pathology, Hokkaido University Hospital, Sapporo, Japan
1 shared publication - Hajime Urai
Toyo University,Dept. of Electrical, Electronic and Communications Engineering,Saitama,Japan
1 shared publication - Hideyuki Kotsuji
Research & Development Group, Hitachi, Ltd., 7-2-1 Omika, Hitachi 319-1221, Japan
1 shared publication
Latest Publications
- 7 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Atomic layer etching of SiCO films with surface modification by O2 and CF4/NH3/Ar plasmas and desorption by IR annealing
Thermal atomic layer etching (ALE) is one promising method to achieve atomic level precision and high conformality over three-dimensional structures that can further enable the manufacturing of gate-all-around devices. Initially, an ALE process using CF4/NH3/Ar remote plasma exposure followed by infrared (IR) annealing was studied on SiCO films. The process showed self-limiting behavior and achieved an etch per cycle (EPC) of 0.2 nm/cycle. To increase the EPC, an O2 remote plasma exposure step was added before the CF4/NH3/Ar plasma exposure step in the ALE cycle. The process achieved an EPC of 1.0 nm/cycle. Measurements of the EPC of the SiCO film showed self-limiting behavior in both the O2 and CF4/NH3/Ar steps. X-ray photoelectron spectroscopy results showed an increase in atomic concentration (AC) of oxygen while the AC of carbon decreased following the exposure of the film to an O2 remote plasma. The results indicate that methyl groups (-CH3) in the top layers of the film are being replaced by hydroxyl (-OH) groups and Si-O-Si bonding. The N1s spectrum showed the formation of an ammonium fluorosilicate (NH4)2SiF6-based surface-modified layer following exposure to a CF4/NH3/Ar remote plasma. IR annealing of the film showed desorption of the ammonium fluorosilicate surface-modified layer and the return to an as grown SiCO film surface composition.
- 7 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Atomic layer etching of SiCO films with surface modification by O2 and CF4/NH3/Ar plasmas and desorption by IR annealing
Thermal atomic layer etching (ALE) is one promising method to achieve atomic level precision and high conformality over three-dimensional structures that can further enable the manufacturing of gate-all-around devices. Initially, an ALE process using CF4/NH3/Ar remote plasma exposure followed by infrared (IR) annealing was studied on SiCO films. The process showed self-limiting behavior and achieved an etch per cycle (EPC) of 0.2 nm/cycle. To increase the EPC, an O2 remote plasma exposure step was added before the CF4/NH3/Ar plasma exposure step in the ALE cycle. The process achieved an EPC of 1.0 nm/cycle. Measurements of the EPC of the SiCO film showed self-limiting behavior in both the O2 and CF4/NH3/Ar steps. X-ray photoelectron spectroscopy results showed an increase in atomic concentration (AC) of oxygen while the AC of carbon decreased following the exposure of the film to an O2 remote plasma. The results indicate that methyl groups (-CH3) in the top layers of the film are being replaced by hydroxyl (-OH) groups and Si-O-Si bonding. The N1s spectrum showed the formation of an ammonium fluorosilicate (NH4)2SiF6-based surface-modified layer following exposure to a CF4/NH3/Ar remote plasma. IR annealing of the film showed desorption of the ammonium fluorosilicate surface-modified layer and the return to an as grown SiCO film surface composition.
- Open Access
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Oxidation state of cobalt oxide in thermal-cyclic atomic layer etching of cobalt by plasma oxidation and organometallization
Thermal-cyclic atomic layer etching of Co blanket film and a fine pattern by plasma oxidation and organometallization were investigated. To obtain a smoothly etched surface and self-limiting etching, a two-step temperature-etching process was used. Co was first oxidized using O2 plasma at a low temperature of 25 °C. Then, the Co oxide formed in the first step was organometallized with acetylacetone (acacH) and sublimed at a high temperature of 210 °C, which is appropriate for organometallization and sublimation. The etched amount per cycle was 0.6 nm. This value is the same as the saturated oxidation amount. The root-mean-square roughness after 20-cycle etching was 0.53 nm, and an atomically smooth etched surface was obtained. From the x-ray photoelectron spectroscopy (XPS) analysis, the oxidation state of Co oxide with a 530-eV O1s peak was dominant for organometallization with acacH. As the temperature increased, the O1s XPS peak of the Co oxide shifted lower to 529 eV and formed a columnar-shaped oxide. However, with acacH, oxide was organometallized when the O1s peak was at 530 eV.
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Open AccessOxidation state of cobalt oxide in thermal-cyclic atomic layer etching of cobalt by plasma oxidation and organometallization
Thermal-cyclic atomic layer etching of Co blanket film and a fine pattern by plasma oxidation and organometallization were investigated. To obtain a smoothly etched surface and self-limiting etching, a two-step temperature-etching process was used. Co was first oxidized using O2 plasma at a low temperature of 25 °C. Then, the Co oxide formed in the first step was organometallized with acetylacetone (acacH) and sublimed at a high temperature of 210 °C, which is appropriate for organometallization and sublimation. The etched amount per cycle was 0.6 nm. This value is the same as the saturated oxidation amount. The root-mean-square roughness after 20-cycle etching was 0.53 nm, and an atomically smooth etched surface was obtained. From the x-ray photoelectron spectroscopy (XPS) analysis, the oxidation state of Co oxide with a 530-eV O1s peak was dominant for organometallization with acacH. As the temperature increased, the O1s XPS peak of the Co oxide shifted lower to 529 eV and formed a columnar-shaped oxide. However, with acacH, oxide was organometallized when the O1s peak was at 530 eV.
- 10 July 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (40) , 405503
Comparison of measurement and numerical calculation on spectral profile of ablation arc plasma around current zero in high-voltage gas circuit breakers
A product-scale interrupter with a rated voltage range of 245 kV to 362 kV and current condition of 20 kA root mean square has been examined to study the arc extinguishing process and the appearance of absorption spectrum by C2 molecules immediately before the current zero. The latter has elucidated the presence of C2 molecules outside the arc core, where the temperature is lower. The temporal behaviour of the C2 absorption spectrum and the emission spectrum of the S+ ion have been measured, which have indicated that polytetrafluoroethylene ablation gas is replaced by SF6 because of gas flow from the thermal puffer chamber to the stagnation point. The computed spectra agree well with the experimentally obtained spectra and show similarities to measured profiles. They show evidence of absorption by C2 molecules in the continuous spectrum and the reproduced band heads of the C2 Swan spectrum.
- 10 July 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (40) , 405503
Comparison of measurement and numerical calculation on spectral profile of ablation arc plasma around current zero in high-voltage gas circuit breakers
A product-scale interrupter with a rated voltage range of 245 kV to 362 kV and current condition of 20 kA root mean square has been examined to study the arc extinguishing process and the appearance of absorption spectrum by C2 molecules immediately before the current zero. The latter has elucidated the presence of C2 molecules outside the arc core, where the temperature is lower. The temporal behaviour of the C2 absorption spectrum and the emission spectrum of the S+ ion have been measured, which have indicated that polytetrafluoroethylene ablation gas is replaced by SF6 because of gas flow from the thermal puffer chamber to the stagnation point. The computed spectra agree well with the experimentally obtained spectra and show similarities to measured profiles. They show evidence of absorption by C2 molecules in the continuous spectrum and the reproduced band heads of the C2 Swan spectrum.
- 1 February 2022
- Vol. 76 (1) , 93-98
Cystic Intracranial Recurrence of Olfactory Neuroblastoma without Accumulation on Fluorine-18-fluorodeoxyglucose Positron Emission Tomography
A 66-year-old man underwent multimodal treatment for olfactory neuroblastoma (ONB). When he was 72 years old, a cystic intracranial lesion without accumulation on fluorine-18-fluorodeoxyglucose positron emission tomography was detected. Surgical resection was performed when the patient was 73 years old. The pathological examination revealed recurrence of ONB, and the patient underwent focal irradiation. At age 81, he presented with a second recurrence in the right occipital lobe with radiological and pathological findings similar to the prior recurrence. This case suggests that pathological confirmation should be considered in cases with atypical radiological findings following the treatment of ONB.
- 1 February 2022
- Vol. 76 (1) , 93-98
Cystic Intracranial Recurrence of Olfactory Neuroblastoma without Accumulation on Fluorine-18-fluorodeoxyglucose Positron Emission Tomography
A 66-year-old man underwent multimodal treatment for olfactory neuroblastoma (ONB). When he was 72 years old, a cystic intracranial lesion without accumulation on fluorine-18-fluorodeoxyglucose positron emission tomography was detected. Surgical resection was performed when the patient was 73 years old. The pathological examination revealed recurrence of ONB, and the patient underwent focal irradiation. At age 81, he presented with a second recurrence in the right occipital lobe with radiological and pathological findings similar to the prior recurrence. This case suggests that pathological confirmation should be considered in cases with atypical radiological findings following the treatment of ONB.
- 5 August 2017
- Published by Wiley in Chemnanomat
- Vol. 3 (10) , 764-771
Formation of Layer‐by‐Layer Assembled Cocatalyst Films of S2−‐Stabilized Ni3S4 Nanoparticles for Hydrogen Evolution Reaction
It remains challenging to develop alternatives, based on widely abundant elements, to highly active Pt catalysts for the hydrogen evolution reaction. Metal sulfide nanoparticles (NPs) are potential candidates for such catalysts because of their metallic features and intrinsic high surface area; however, their poor electrocatalytic activity, owing to the presence of surface ligands, is an obstacle to practical use. Here we report the selective synthesis of oleylamine (OAm)‐stabilized Ni3S4 (Ni3S4/OAm) NPs. The insulating ligands were exchanged with S2− and loaded on electrodes by a layer‐by‐layer (LbL) assembly method with metal cation linkers. The enhanced catalytic properties were confirmed by electrochemical measurements. A LbL assembled film with Ni2+ as a linker (11 cycles) showed an overpotential of 555 mV@‐4 mA cm−2 at pH 6.8 and a stable current density for 12 h. In addition, when this LbL assembly method was applied to a CdS/Cu(In,Ga)Se2 photocatalyst electrode, the resulting photoelectrode showed an enhanced photocurrent compared with that of the Ni3S4/OAm NPs‐spin coated and bare photoelectrodes. These results indicate the versatility of LbL assembly for fabrication of ligand‐free NP electrocatalyst films.
- 5 August 2017
- Published by Wiley in Chemnanomat
- Vol. 3 (10) , 764-771
Formation of Layer‐by‐Layer Assembled Cocatalyst Films of S2−‐Stabilized Ni3S4 Nanoparticles for Hydrogen Evolution Reaction
It remains challenging to develop alternatives, based on widely abundant elements, to highly active Pt catalysts for the hydrogen evolution reaction. Metal sulfide nanoparticles (NPs) are potential candidates for such catalysts because of their metallic features and intrinsic high surface area; however, their poor electrocatalytic activity, owing to the presence of surface ligands, is an obstacle to practical use. Here we report the selective synthesis of oleylamine (OAm)‐stabilized Ni3S4 (Ni3S4/OAm) NPs. The insulating ligands were exchanged with S2− and loaded on electrodes by a layer‐by‐layer (LbL) assembly method with metal cation linkers. The enhanced catalytic properties were confirmed by electrochemical measurements. A LbL assembled film with Ni2+ as a linker (11 cycles) showed an overpotential of 555 mV@‐4 mA cm−2 at pH 6.8 and a stable current density for 12 h. In addition, when this LbL assembly method was applied to a CdS/Cu(In,Ga)Se2 photocatalyst electrode, the resulting photoelectrode showed an enhanced photocurrent compared with that of the Ni3S4/OAm NPs‐spin coated and bare photoelectrodes. These results indicate the versatility of LbL assembly for fabrication of ligand‐free NP electrocatalyst films.
- 25 July 2014
- Published by Wiley in physica status solidi (c)
- Vol. 11 (11-12) , 1626-1629
Enhancement of IR photoluminescence of β‐FeSi2 nanocrystals by Cu‐doping and study of its mechanism
- 25 July 2014
- Published by Wiley in physica status solidi (c)
- Vol. 11 (11-12) , 1626-1629
Enhancement of IR photoluminescence of β‐FeSi2 nanocrystals by Cu‐doping and study of its mechanism
- 1 August 2006
- Published by S. Karger AG in Pediatric Neurosurgery
- Vol. 42 (5) , 320-324
Cystic Meningioangiomatosis
A case of cerebral meningioangiomatosis with rare cyst formation is reported. A 14-year-old boy without any stigmata of neurofibromatosis type 2 presented intractable complex partial and generalized seizures since the age of 12 years. Neuroradiological studies showed an abnormal cystic mass with calcification in the left frontal lobe of the cerebrum. The tumor was located in the leptomeninges and cerebral cortex. The patient underwent surgical treatment because medical treatment with phenytoin and sodium valproate was not sufficient to control the seizures. An intraoperative electrocorticogram revealed that epileptic foci were recorded from the cortex, which was adjacent to the lesion. Histopathology showed specific features of meningioangiomatosis with meningioma-like nodules. The patient did not have any seizures with anticonvulsants after surgery. It is important to distinguish meningioangiomatosis from other possible cortical lesions and epileptic foci should be carefully considered before resection, because it is a benign and surgically manageable cause of seizures.
- 1 August 2006
- Published by S. Karger AG in Pediatric Neurosurgery
- Vol. 42 (5) , 320-324
Cystic Meningioangiomatosis
A case of cerebral meningioangiomatosis with rare cyst formation is reported. A 14-year-old boy without any stigmata of neurofibromatosis type 2 presented intractable complex partial and generalized seizures since the age of 12 years. Neuroradiological studies showed an abnormal cystic mass with calcification in the left frontal lobe of the cerebrum. The tumor was located in the leptomeninges and cerebral cortex. The patient underwent surgical treatment because medical treatment with phenytoin and sodium valproate was not sufficient to control the seizures. An intraoperative electrocorticogram revealed that epileptic foci were recorded from the cortex, which was adjacent to the lesion. Histopathology showed specific features of meningioangiomatosis with meningioma-like nodules. The patient did not have any seizures with anticonvulsants after surgery. It is important to distinguish meningioangiomatosis from other possible cortical lesions and epileptic foci should be carefully considered before resection, because it is a benign and surgically manageable cause of seizures.
- Open Access
- 5 June 1997
- Published by The Electrochemical Society of Japan in Denki Kagaku oyobi Kogyo Butsuri Kagaku
- Vol. 65 (6) , 504-505
Tethered Mediator Biosensor: The Concept and Preliminary Results
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
- 5 June 1997
- Published by The Electrochemical Society of Japan in Denki Kagaku oyobi Kogyo Butsuri Kagaku
- Vol. 65 (6) , 504-505
Open AccessTethered Mediator Biosensor: The Concept and Preliminary Results
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
- 1 January 1991
- Published by Elsevier in Electrochimica Acta
- Vol. 36 (10) , 1649-1651
Electrochemical production of the ascorbic acid radical and its in situ detection using uv spectroelectrochemical method
- 1 January 1991
- Published by Elsevier in Electrochimica Acta
- Vol. 36 (10) , 1649-1651
Electrochemical production of the ascorbic acid radical and its in situ detection using uv spectroelectrochemical method