Influence of Clinically Relevant Factors on the Immediate Biomechanical Surrounding for a Series of Dental Implant Designs
- 7 February 2011
- journal article
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 133 (3) , 031005
Abstract
The objective of the present study was to assess the influence of various clinically relevant scenarios on the strain distribution in the biomechanical surrounding of five different dental implant macrogeometries. The biomechanical environment surrounding an implant, i.e., the cortical and trabecular bone, was modeled along with the implant. These models included two different values of the study parameters including loading conditions, trabecular bone elastic modulus, cortical/trabecular bone thickness ratio, and bone loss for five implant designs. Finite element analysis was conducted on the models and strain in the bones surrounding the implant was calculated. Bone volumes having strains in four different windows of 0–200 με, 200–1000 με, 1000–3000 με, and >3000 με were measured and the effect of each biomechanical variable and their two-way interactions were statistically analyzed using the analysis of variance method. This study showed that all the parameters included in this study had an effect on the volume of bones in all strain windows, except the implant design, which affected only the 0–200 με and >3000 με windows. The two-way interaction results showed that interactions existed between implant design and bone loss, and loading condition, bone loss in the 200–1000 με window, and between implant design and loading condition in the 0–200 με window. Within the limitations of the present methodology, it can be concluded that although some unfavorable clinical scenarios demonstrated a higher volume of bone in deleterious strain levels, a tendency toward the biomechanical equilibrium was evidenced regardless of the implant design.Keywords
This publication has 30 references indexed in Scilit:
- Strain Measurement of Pure Titanium Covered With Soft Tissue Using X-Ray DiffractionJournal of Biomechanical Engineering, 2010
- Factorial analysis of variables influencing stress in all-ceramic crownsDental Materials, 2006
- Biomechanical Evaluation of a Wide-Diameter Short Dental Implant for Use in Compromised Bone Quality Regions by Finite Element Method2006
- A Microstructural Finite Element Simulation of Mechanically Induced Bone FormationJournal of Biomechanical Engineering, 2001
- The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental studyClinical Oral Implants Research, 2001
- Histological evaluation of peri-implant bone at implants subjected to occlusal overload or plaque accumulationClinical Oral Implants Research, 1997
- Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys.Clinical Oral Implants Research, 1996
- Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians.1994
- Bone “mass” and the “mechanostat”: A proposalThe Anatomical Record, 1987
- Osseointegrated Titanium Implants:Requirements for Ensuring a Long-Lasting, Direct Bone-to-Implant Anchorage in ManActa Orthopaedica, 1981