Stress corrosion testing of roof bolt grade 60 steel in simulated underground coal mine atmosphere
- 21 May 2019
- journal article
- research article
- Published by SAGE Publications in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
- Vol. 128 (4) , 206-215
Abstract
Corrosion of roof bolts in underground mine environments could have an adverse impact on ground control, which is directly related to workforce safety. Past studies state that stress corrosion cracking (SCC) of roof bolts is a significant problem in underground coal mines, resulting in premature bolt failures. However, it has not been seriously studied in U.S. underground coal mines. As a preliminary study, the most common roof bolt material used in U.S. mines, ASTM A 615 Grade 60 steel, was studied under stress corrosion conditions. ASTM G30 standard was applied to achieve this and tested in the simulated coal mine conditions. SCC was observed on samples that were tested for 180 days. Chloride SCC (ClSCC) was found to be the corrosion mechanism resulting in cracks from the EDS data. This paper mainly discusses the test protocol, shortcomings of this preliminary testing and makes recommendations based on the observations and results.Keywords
Funding Information
- ASTM International (GRANT2014)
This publication has 9 references indexed in Scilit:
- Corrosive Environment Assessment and Corrosion-Induced Rockbolt Failure Analysis in a Costal Underground MineInternational Journal of Corrosion, 2019
- Novel stress corrosion testing method for high‐strength steelsMaterials and Corrosion, 2018
- An experimental framework for simulating stress corrosion cracking in cable boltsTunnelling and Underground Space Technology, 2018
- Failure of the threaded region of rockbolts in underground coal minesMining Technology: Transactions of the Institutions of Mining and Metallurgy, 2018
- Classification of Aqueous Corrosion in Underground MinesRock Mechanics and Rock Engineering, 2016
- Influence of milling on the development of stress corrosion cracks in austenitic stainless steelJournal of Materials Processing Technology, 2015
- Fracture characteristics in rock bolts in underground coal mine roadwaysInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Fundamental studies on stress-corrosion cracking in iron and underlying mechanismsActa Materialia, 2010
- Stress corrosion cracking and component failure: Causes and preventionSādhanā, 1995