Kanchan Mondal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kanchan Mondal has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Debalina Dasgupta
4 shared publicationsAnand Bhagwat
Minova USA Inc., Georgetown, KY, USA
3 shared publicationsGeorge Trifon
Southern Illinois University
3 shared publications- Gopi Bylapudi
College of Engineering, Southern Illinois University, Carbondale, IL, USA
3 shared publications Kaleb Hartman
Southern Illinois University
3 shared publications- Anthony J. S. Spearing
School of Mines, China University of Mining and Technology, 1 Daxue Road, Tongshan District, Xuzhou 221116, China
2 shared publications
Latest Publications
- 7 June 2021
- Published by Wiley in Crystal Research and Technology
- Vol. 56 (8) , 2000231
Synthesis and Characterization of TiC Nanofibers Obtained via a Modified Carbothermal Process
A simple method for synthesis of titanium carbide (TiC) nanofibers by a modified carbothermal reduction of electrospun titanium‐based fibers is reported. The effect of synthesis steps on the final product is discussed. Continuous TiC fibers synthesized have a smooth surface morphology, with average diameter of 148 nm and length in the centimeter range. X‐ray diffraction and high‐resolution transmission electron microscopy analysis results indicate that the fibers consist of TiC of high purity. Impact of heat treatment on the morphology and chemical and crystalline composition of the product is also investigated. Based on the experimental evidence, it is hypothesized that the carbothermal reduction of calcined electrospun fibers with precoated carbon proceeds through diffusion‐limited shrinking core pathway while that of the as‐spun fibers follows the reaction‐limited solution precipitation mechanism. The TiC nanofibers also show superior sintering properties by increasing theoretical density of hot pressed TiB2 from 94.5% of theoretical density to 97.9% of theoretical density. When sintered with ceria, it improves the conductivity of the ceria by 18.29 times as compared to 2.94 times by TiC nanoparticles at 800 °C. The TiC nanofibers show metallic behavior as well as potential for application as electrochemical double layer capacitor supercapacitors.
- 7 June 2021
- Published by Wiley in Crystal Research and Technology
- Vol. 56 (8) , 2000231
Synthesis and Characterization of TiC Nanofibers Obtained via a Modified Carbothermal Process
A simple method for synthesis of titanium carbide (TiC) nanofibers by a modified carbothermal reduction of electrospun titanium‐based fibers is reported. The effect of synthesis steps on the final product is discussed. Continuous TiC fibers synthesized have a smooth surface morphology, with average diameter of 148 nm and length in the centimeter range. X‐ray diffraction and high‐resolution transmission electron microscopy analysis results indicate that the fibers consist of TiC of high purity. Impact of heat treatment on the morphology and chemical and crystalline composition of the product is also investigated. Based on the experimental evidence, it is hypothesized that the carbothermal reduction of calcined electrospun fibers with precoated carbon proceeds through diffusion‐limited shrinking core pathway while that of the as‐spun fibers follows the reaction‐limited solution precipitation mechanism. The TiC nanofibers also show superior sintering properties by increasing theoretical density of hot pressed TiB2 from 94.5% of theoretical density to 97.9% of theoretical density. When sintered with ceria, it improves the conductivity of the ceria by 18.29 times as compared to 2.94 times by TiC nanoparticles at 800 °C. The TiC nanofibers show metallic behavior as well as potential for application as electrochemical double layer capacitor supercapacitors.
- 2 July 2020
- Published by SAGE Publications in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
- Vol. 129 (3) , 135-150
Corrosion properties of ASTM A615 rock bolt steel in US underground coal mines
Corrosion of rock bolts is a relatively slow process yet a potential problem for the underground mining industry. Mine groundwater in the strata through natural or mining-induced cracks together with the humid environment in the mine openings interact with the roof support systems often resulting in corrosion. Electrochemical studies of the commonly used rock bolt steel in the coal mining environments will lead to a better understanding of the material’s performance and their ability to resist corrosion. The influence of pH, solution resistivity, total dissolved solids, and aggressive ions on the electrochemical properties of rock bolt steel are discussed. This preliminary study focuses on understanding the corrosion potential, polarization resistance, and corrosion rates of the rock bolt steel that is most commonly used in US underground coal mines. Based on the findings, it was observed that the polarization resistance (Rp) is inversely proportional to the corrosion rate (CR) over time.
- 2 July 2020
- Published by SAGE Publications in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
- Vol. 129 (3) , 135-150
Corrosion properties of ASTM A615 rock bolt steel in US underground coal mines
Corrosion of rock bolts is a relatively slow process yet a potential problem for the underground mining industry. Mine groundwater in the strata through natural or mining-induced cracks together with the humid environment in the mine openings interact with the roof support systems often resulting in corrosion. Electrochemical studies of the commonly used rock bolt steel in the coal mining environments will lead to a better understanding of the material’s performance and their ability to resist corrosion. The influence of pH, solution resistivity, total dissolved solids, and aggressive ions on the electrochemical properties of rock bolt steel are discussed. This preliminary study focuses on understanding the corrosion potential, polarization resistance, and corrosion rates of the rock bolt steel that is most commonly used in US underground coal mines. Based on the findings, it was observed that the polarization resistance (Rp) is inversely proportional to the corrosion rate (CR) over time.
- 20 December 2019
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (3) , 2493-2507
Corrosion of Steel in MSE Walls Due to Deicers and Backfill Aggregates
- 20 December 2019
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 38 (3) , 2493-2507
Corrosion of Steel in MSE Walls Due to Deicers and Backfill Aggregates
- 17 December 2019
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 37 (2) , 593-604
Design and Evaluation of the Roof Bolt Corrosion Test System in a Simulated Underground Coal Mine Environment
- 17 December 2019
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 37 (2) , 593-604
Design and Evaluation of the Roof Bolt Corrosion Test System in a Simulated Underground Coal Mine Environment
- 21 May 2019
- Published by SAGE Publications in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
- Vol. 128 (4) , 206-215
Stress corrosion testing of roof bolt grade 60 steel in simulated underground coal mine atmosphere
Corrosion of roof bolts in underground mine environments could have an adverse impact on ground control, which is directly related to workforce safety. Past studies state that stress corrosion cracking (SCC) of roof bolts is a significant problem in underground coal mines, resulting in premature bolt failures. However, it has not been seriously studied in U.S. underground coal mines. As a preliminary study, the most common roof bolt material used in U.S. mines, ASTM A 615 Grade 60 steel, was studied under stress corrosion conditions. ASTM G30 standard was applied to achieve this and tested in the simulated coal mine conditions. SCC was observed on samples that were tested for 180 days. Chloride SCC (ClSCC) was found to be the corrosion mechanism resulting in cracks from the EDS data. This paper mainly discusses the test protocol, shortcomings of this preliminary testing and makes recommendations based on the observations and results.
- 21 May 2019
- Published by SAGE Publications in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
- Vol. 128 (4) , 206-215
Stress corrosion testing of roof bolt grade 60 steel in simulated underground coal mine atmosphere
Corrosion of roof bolts in underground mine environments could have an adverse impact on ground control, which is directly related to workforce safety. Past studies state that stress corrosion cracking (SCC) of roof bolts is a significant problem in underground coal mines, resulting in premature bolt failures. However, it has not been seriously studied in U.S. underground coal mines. As a preliminary study, the most common roof bolt material used in U.S. mines, ASTM A 615 Grade 60 steel, was studied under stress corrosion conditions. ASTM G30 standard was applied to achieve this and tested in the simulated coal mine conditions. SCC was observed on samples that were tested for 180 days. Chloride SCC (ClSCC) was found to be the corrosion mechanism resulting in cracks from the EDS data. This paper mainly discusses the test protocol, shortcomings of this preliminary testing and makes recommendations based on the observations and results.
- 1 October 2017
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 113, 806-818
Thermal circuits based model for predicting the thermal conductivity of nanofluids
- 1 October 2017
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 113, 806-818
Thermal circuits based model for predicting the thermal conductivity of nanofluids
- 19 November 2014
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 73 (1) , 265-269
Synthesis and characterization of Y2Ti2O7 and ErxY2−xTi2O7 nanofibers
- 19 November 2014
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 73 (1) , 265-269
Synthesis and characterization of Y2Ti2O7 and ErxY2−xTi2O7 nanofibers
- 1 October 2014
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 39 (31) , 17671-17689
Thermodynamic evaluation of hydrogen production from methane
- 1 October 2014
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 39 (31) , 17671-17689
Thermodynamic evaluation of hydrogen production from methane