Spring-Induced Mechanical Strategy for High-Output, Flexible PAN-Based Piezoelectric Harvester
Open Access
Abstract
The growing demand for wearable electronics and the Internet of Things (IoT) calls for flexible piezoelectric energy harvesters with substantially improved power output. Polyacrylonitrile (PAN) polymers, with their high polarization and excellent thermal stability, are among the most promising candidates for efficient flexible piezoelectric materials. However, the performance of existing PAN-based harvesters remains limited, and strategies for further enhancing their output are still insufficiently explored. Herein, this study aims to overcome the output bottleneck of PAN-based PENGs by implementing a novel mechanical excitation strategy. Using electrospun flexible PAN-BaTiO3 nanocomposite films, we systematically compared the electromechanical responses under conventional compression and impact modes. Real-time synchronized force–current measurements in compression mode revealed that the output current increases progressively with drive frequency (2–10 Hz). Specifically, the PENG with PAN-20 wt.% BaTiO3 achieved a peak current of 0.33 mA at 10 Hz, showing an approximately 7.9-fold enhancement over its pure PAN counterpart. More importantly, under 6 Hz impact excitation, the device exhibited a remarkable output current density of 1.0 mA cm−2 and a peak power density of 256.5 µW cm−2. This current density is 95 times higher than that in compression mode at a comparable frequency and surpasses the performance of most recently reported piezoelectric and triboelectric nanogenerators. With an effective area of 16 cm2, the PENG could simultaneously illuminate up to 275 commercial LEDs or 100 individual bulbs and maintained stable operation over 63,530 cycles. This work overcomes the output bottleneck in low-frequency energy harvesting and provides an effective pathway toward practical energy-harvesting applications.Keywords
Funding Information
- National Natural Science Foundation of China (52172265)
- Excellent Youth Science Foundation of Hunan Province (2022JJ20067)
- science and technology innovation Program of Hunan Province (2022RC1074)
- Central South University Innovation-Driven Research Program (2023CXQD010)
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, China
This publication has 47 references indexed in Scilit:
- Thousandfold Boosting Peak Power Output in Piezoelectric Nanogenerator via Impact Excitation StrategyAdvanced Energy Materials, 2025
- Electrospinning and Nanofiber Technology: Fundamentals, Innovations, and ApplicationsAdvanced Materials, 2025
- Construction of Flexible Piezoceramic Array with Ultrahigh Piezoelectricity via a Hierarchical Design StrategyAdvanced Functional Materials, 2023
- Multilevel Structure Engineered Lead‐Free Piezoceramics Enabling Breakthrough in Energy Harvesting Performance for BioelectronicsAdvanced Functional Materials, 2022
- All‐Ceramic Flexible Piezoelectric Energy HarvesterAdvanced Functional Materials, 2022
- Stretchable, Breathable, and Stable Lead‐Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy HarvestingAdvanced Materials, 2022
- Hierarchically Interconnected Piezoceramic Textile with a Balanced Performance in Piezoelectricity, Flexibility, Toughness, and Air PermeabilityAdvanced Functional Materials, 2021
- “Self‐Matched” Tribo/Piezoelectric Nanogenerators Using Vapor‐Induced Phase‐Separated Poly(vinylidene fluoride) and Recombinant Spider SilkAdvanced Materials, 2020
- Lead‐Free Perovskite Nanowire‐Employed Piezopolymer for Highly Efficient Flexible Nanocomposite Energy HarvesterSmall, 2018
- Highly‐Efficient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic SubstratesAdvanced Materials, 2014