Effect of surface treatment of CAD/CAM resin composites on the shear bond strength of self-adhesive resin cement
Authors:
Open Access
- 25 March 2021
- journal article
- research article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 40 (2) , 364-378
Abstract
This study examined the effects of sandblasting, hydrofluoric acid etching and priming on the shear bond strength of self-adhesive resin cement between seven different CAD/CAM resin composites and a resin composite core material at 24-h after cement mixing. Five surface treatments [control (C), sandblasting (S), priming (P), sandblasting with priming (SP), and 9% HF etching with priming (HFP)] were performed respectively for disc specimens of CAD/CAM blocks. There were no significant differences in bond strength among the C, S, and P, except for one block (p>0.05). SP showed a greater bond strength than S. Weibull moduli were not changed significantly among all treatments for all blocks, whereas the strengths with 5% and 95% failure probability of SP and HFP showed greater values than the others. The bond strengths of HFP were comparable to those of SP. Priming after sandblasting or HF etching could be effective to increase the bond strength of CAD/CAM blocks.Keywords
This publication has 40 references indexed in Scilit:
- Fatigue analysis of computer‐aided design/computer‐aided manufacturing resin‐based composite vs. lithium disilicate glass‐ceramicEuropean Journal of Oral Sciences, 2016
- From Artisanal to CAD-CAM BlocksJournal of Dental Research, 2016
- Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 1: Effects of sandblasting and silanizationDental Materials Journal, 2016
- Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cementsJournal of Applied Oral Science, 2015
- Mechanical properties of resin-ceramic CAD/CAM restorative materialsThe Journal of Prosthetic Dentistry, 2015
- Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systemsDental Materials Journal, 2015
- Mechanical properties of composite resin blocks for CAD/CAMDental Materials Journal, 2014
- Properties of experimental urethane dimethacrylate-based dental resin composite blocks obtained via thermo-polymerization under high pressureDental Materials, 2013
- Simultaneous determination of polymerization shrinkage, exotherm and thermal expansion coefficient for dental resin-compositesDental Materials, 2012
- Effect of abutment tooth color, cement color, and ceramic thickness on the resulting optical color of a CAD/CAM glass-ceramic lithium disilicate-reinforced crownThe Journal of Prosthetic Dentistry, 2011