Cement Integrity Loss due to Interfacial Debonding and Radial Cracking during CO2 Injection
Open Access
Abstract
Cement provides zonal isolation and mechanical support, and its integrity is critical to the safety and efficiency of the CO2 injection process for geologic carbon storage. This work focuses on interfacial debonding at wellbore interfaces and radial cracking in cement during CO2 injection. It adopts the definition of the energy release rate (ERR) to characterize the propagation of cracks. Based on the finite element method, the proposed model estimates the ERRs of both types of cracks with practical wellbore configurations and injection parameters. Further parametric studies reveal the effects of cement’s mechanical and thermal properties and the crack geometry on crack propagation. Simulation results show that the ERRs of interfacial and radial cracks would surpass 100 J/m2 with typical cement properties. The cement’s thermal expansion coefficient is the most influential factor on the ERR, followed by its Young’s modulus, Poisson’s ratio, and thermal conductivity. The initial sizes and positions of the cracks are also important parameters for controlling crack propagation. Moreover, non-uniform in situ stresses would accelerate crack propagation at the interfaces. These findings are valuable and could help to optimize cement sheath design in order to ensure the long-term integrity of wells for geological carbon storage.Keywords
Funding Information
- the National Key R&D Program of China (2018YFB0605502)
- National Natural Science Foundation of China (11502303)
- the Natural Science Foundation of Beijing (2182062)
This publication has 37 references indexed in Scilit:
- Evaluation of wellbore integrity for HTHP gas wells under solid-temperature coupling using a new analytical modelJournal of Natural Gas Science and Engineering, 2015
- Three-dimensional analysis of cement sheath integrity around WellboresJournal of Petroleum Science and Engineering, 2014
- Effect of Dynamic Loading on Wellbore Leakage for the Wabamun Area CO2-Sequestration ProjectJournal of Canadian Petroleum Technology, 2014
- Cement Sheath Integrity for CO2 Storage – An Integrated PerspectiveEnergy Procedia, 2013
- Use of a Mechanistic Model To Forecast Cement-Sheath IntegritySPE Drilling & Completion, 2012
- How To Prevent Loss of Zonal Isolation Through a Comprehensive Analysis of Microannulus FormationSPE Drilling & Completion, 2011
- Progressive crack growth analysis using interface element based on the virtual crack closure techniqueFinite Elements in Analysis and Design, 2006
- Cement Design Based on Cement Mechanical ResponseSPE Drilling & Completion, 1998
- The Effects of Temperature and Cement Admixes on Bond StrengthJournal of Petroleum Technology, 1992
- Mixed Mode Cracking in Layered Materials1991