Electric Discharge Machining of Inconel 718 Under a Distinct Dielectric Medium
- 1 May 2022
- journal article
- research article
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 11 (5) , 053010
Abstract
In this research, an attempt was made to machine the Inconel 718 alloy under varied dielectric medium with the objective of generating wealth from waste and establishing a green environment. Experiments were conducted to analyze the influence of input variables under the EDM oil, pure sunflower oil, used sunflower oil, palm oil and ground nut oil insulating medium. Five different tools namely copper, brass, aluminium, copper—graphite and aluminium—graphite was utilized for investigation and experimental runs were designed using Taguchi mixed orthogonal array. The results revealed that the characteristics of the dielectric fluid influences the spark generation and machined cycle time. The findings divulged that dielectric fluid with a high density facilitates flushing, low specific heating distributes heat uniformly and low carbon content eliminates black spots. Electrode with low thermal conductivity dissipates more heat and low latent heat of fusion erodes excessively. Micro pits, globules, angled and clouded blobs, black spots, material dunes and redeposited material are the various features observed on the machined surface texture.Keywords
This publication has 44 references indexed in Scilit:
- Fuzzy approach to select machining parameters in electrical discharge machining (EDM) and ultrasonic-assisted EDM processesJournal of Manufacturing Systems, 2013
- INVESTIGATING THE EFFECTS OF EDM PARAMETERS ON SURFACE INTEGRITY, MRR AND TWR IN MACHINING OF Ti–6Al–4VMachining Science and Technology, 2012
- Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM Using Copper Tungsten Electrode: A Statistical ApproachAdvanced Materials Research, 2010
- A Transparent, Flexible, Low‐Temperature, and Solution‐Processible Graphene Composite ElectrodeAdvanced Functional Materials, 2010
- Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes—Taguchi approachInternational Journal of Machine Tools and Manufacture, 2009
- Thermal modeling of the material removal rate and surface roughness for die-sinking EDMThe International Journal of Advanced Manufacturing Technology, 2009
- Influence of process parameters on electric discharge machining of WC/30%Co compositesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008
- Some investigations into the electric discharge machining of hardened tool steel using different electrode materialsJournal of Materials Processing Technology, 2004
- The Effect of Cutting Parameters on Workpiece Surface Roughness in Wire EDMMachining Science and Technology, 2003
- Non-conventional machining of particle reinforced metal matrix compositesJournal of Materials Processing Technology, 2001