Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids
Authors:
Open Access
- 6 October 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Energy Harvesting and Systems
- Vol. 11 (1)
Abstract
Heat exchanger (HE) is an instrument that facilitates the operation of HE between two fluids that are at various temperatures. Double-pipe HEs are used in many organizations because of their low installation, design, maintenance costs, flexibility, and their suitability for high pressure applications. Heat transfer (HT) augmentation techniques (passive, active or compound techniques) are used in heat exchangers to reduce the HT surface area, to increase HT capacity and to reduce pumping power. Passive augmentation techniques are much cheaper and do not involve any external power input. They aim to improve the effective surface area, the residence time of the HT fluid and its thermal conductivity by the usage of nanofluids. Nanofluids are used for cooling applications in organizations, transportation, nuclear reactors, electrical and electronic devices and for biomedical applications. Hybrid nanofluids have higher thermal conductivity, low PD and frictional losses and pumping power as compared to the mono nanofluids. In this present work, experiments are conducted in a double pipe HE using TiO2, and SiC-water nanofluids by varying the volume concentration and cold fluid mass flow rate ranging from 17.5 to 34.5 lpm by making constant hot fluid mass flow rate. Further, experiments are conducted using TiO2–SiC/water hybrid nanofluids. Influence of nano and hybrid nanofluids on the overall HTC and friction factor are experimentally investigated. From the experiments, TiO2–SiC/water hybrid nanofluid with nanoparticle ratio TiO2:SiC = 1:2 is found to be optimum as the heat transfer enhancement is more with less improvement in friction factor. The overall heat transfer, and friction factor enhancement is 22.92 %, and 11.20 % higher respectively when compared with base fluid for TiO2:SiC = 1:2.Keywords
This publication has 35 references indexed in Scilit:
- A Review on Enhancement of Heat Transfer in Heat Exchanger with Different InsertsMaterials Today: Proceedings, 2017
- Dependence of Structural and Magnetic Properties on Annealing Times in Co-precipitated Cobalt Ferrite NanoparticlesJournal of Magnetics, 2015
- Experimental study on heat transfer and rheological characteristics of hybrid nanofluids for cooling applicationsJournal of Experimental Nanoscience, 2014
- Experimental study on the effect of TiO2–water nanofluid on heat transfer and pressure dropExperimental Thermal and Fluid Science, 2012
- Effect of Al2O3–Cu/water hybrid nanofluid in heat transferExperimental Thermal and Fluid Science, 2012
- Investigation of turbulent convective heat transfer and pressure drop of TiO2/water nanofluid in circular tubeInternational Communications in Heat and Mass Transfer, 2011
- Development of new correlations for convective heat transfer and friction factor in turbulent regime for nanofluidsInternational Journal of Heat and Mass Transfer, 2010
- An investigation of silicon carbide-water nanofluid for heat transfer applicationsJournal of Applied Physics, 2009
- Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flowInternational Journal of Heat and Mass Transfer, 2005
- The “Heatline” Visualization of Convective Heat TransferJournal of Heat Transfer, 1983