Nanocomposite sensors with indium tin oxide nanowires in a polyvinyl butyral matrix for crack detection in structural health monitoring
- 24 March 2025
- journal article
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 25 (4) , 2628-2642
Abstract
We propose and test a novel sensor for structural health monitoring (SHM) based on a nanocomposite film consisting of indium tin oxide (ITO) nanowires embedded in a polyvinyl butyral (PVB) matrix to detect cracks. The sensor operates by measuring the electrical resistance between terminals when it is adhered to the surface of a structure. When damage mechanisms are present, the ITO nanowires either break or rearrange, causing a change in the sensor’s internal resistance. However, certain limitations must be addressed for broader applications. Among these, the effects of loading, humidity, and temperature fluctuations in the host structure pose significant challenges. Experimental tests were conducted to evaluate the environmental influences on measurements, revealing minimal data variation, indicating that these factors are not critical concerns. Additionally, sensitivity tests were performed to assess the sensor’s response to structural changes emulating damage mechanisms, and the sensor demonstrated accurate detection. In crack propagation experiments, the sensor detected cracks during their nucleation, propagation, and ultimate failure stages. The results show this novel sensor has strong potential for crack detection and monitoring applications. Another key advantage is the simplicity of signal collection and analysis, as measurements can be obtained through static readings without excitation signals in the structure. Furthermore, the sensor’s resistance correlates well with the extent of damage.Keywords
Funding Information
- Financiadora de Estudos e Projetos (2)
This publication has 33 references indexed in Scilit:
- Experimental and simulation studies of water molecule diffusion in polyvinyl butyral and its effect on thermal, insulating and mechanical propertiesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2024
- On the Frequencies for Structural Health Monitoring in Plates with Symmetrical Damage: An Analytical ApproachJournal of Nondestructive Evaluation, 2022
- The mechanical properties of Polyvinyl Butyral (PVB) at high strain ratesConstruction and Building Materials, 2015
- Crack monitoring method based on Cu coating sensor and electrical potential technique for metal structureChinese Journal of Aeronautics, 2015
- Crack detection and characterization techniques-An overviewStructural Control and Health Monitoring, 2014
- The mechanical behaviour of poly(vinyl butyral) at different strain magnitudes and strain ratesJournal of Materials Science, 2011
- Coupled carbon nanotube network and acoustic emission monitoring for sensing of damage development in compositesCarbon, 2009
- Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage IdentificationJournal of Nondestructive Evaluation, 2009
- Carbon nanotube-based health monitoring of mechanically fastened composite jointsComposites Science and Technology, 2008
- Tin-doped indium oxide nanobelts grown by carbothermal reduction methodApplied Physics A, 2005