Optimal YBCO Bulk Size to Maximize Running Speed of the SS-HTS Maglev Circular Track System by Static Simulation Experiments
- 9 September 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (3) , 1-5
Abstract
The constraints of experiment site and construction cost have increased difficulties in the high-speed and large-scale experiments of high- $T_{\text{c}}$ superconductor (HTS) maglev. At the beginning of study, a side-suspension high- $T_{\text{c}}$ superconductor (SS-HTS) maglev circular track was successfully built which enabled the prototype vehicle to reach the maximum speed of 160 km/h. However, it is expected that with further increase of the running speed, the insufficient centripetal force caused thereby will destroy the dynamic stability of the circular track system. In order to improve the dynamic performance of circular track system with prototype vehicle running at high speed, static experiments were carried out to simulate the free suspension and dynamic processes of the prototype vehicle. The levitation and guidance performance of bulk $\text{YBa}_2 \text{Cu}_3 \text{O}_{7-x}$ (YBCO) superconductors with different thickness and sectional area were tested during the simulation experiment, and the curve of $K_l$ and $K_g$ was obtained through calculation with the centrifugal force formula. The test and calculation results indicate that the maximum speed of prototype vehicle can rise by 19% compared to the earlier circular system in case of 40 mm × 40 mm × 16 mm (L × W × H) bulk YBCO superconductors. The research findings can provide design reference for optimizing and constructing a SS-HTS maglev circular track system with higher performance and higher speed grade.
Keywords
Funding Information
- Program of Education Department of Fujian Province (JT180099)
- Subproject of National Key Research and Development Plan (2017YFE0301401)
- Funds of Science and Technology Department of Sichuan Province (2018JY0003, 2017JY0057)
- Doctoral Innovation Fund Program of Southwest Jiaotong University
This publication has 19 references indexed in Scilit:
- The approach to calculate the aerodynamic drag of maglev train in the evacuated tubeJournal of Modern Transportation, 2013
- Key vacuum technology issues to be solved in evacuated tube transportationJournal of Modern Transportation, 2011
- Maglev performance of a double-layer bulk high temperature superconductor above a permanent magnet guidewaySuperconductor Science and Technology, 2009
- Superconductively Levitated Transport System—The SupraTrans ProjectIEEE Transactions on Applied Superconductivity, 2005
- Influence of the lateral movement on the levitation and guidance force in the high-temperature superconductor maglev systemApplied Physics Letters, 2005
- The man-loading high-temperature superconducting maglev test vehicleIEEE Transactions on Applied Superconductivity, 2003
- The first man-loading high temperature superconducting Maglev test vehicle in the worldPhysica C: Superconductivity and its Applications, 2002
- Vertical and lateral forces between a permanent magnet and a high-temperature superconductorJournal of Applied Physics, 1999
- Levitation in PhysicsScience, 1989
- Hysteretic levitation forces in superconducting ceramicsApplied Physics Letters, 1988