FCFeinan Cai

Feinan Cai

*This is an algorithmically generated author record based on publicly available information.

Feinan Cai has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Vertical Magnetic Field Distribution Characteristics of Triple-Peak Halbach Array PMG and Its Engineering Application in HTS Maglev Train

    by Dajin Zhou, Liming Zhu, Jiao Liu, Feinan Cai, Tao Xu, Lili Wang, Yuehua Chen, Cuihua Cheng, Yong Zhao

    The maglev train has a broad application prospect in the field of high-speed transportation, which is based on the high-temperature superconductor permanent magnet guideway (HTS-PMG) maglev system. The optimized design of the permanent magnet guideway (PMG) configuration is of great significance to improve the overall performance of the system and reduce the cost. In this article, a triple-peak Halbach array PMG is proposed, which is suitable for the HTS-PMG maglev system based on square single-seed melt-texture YBa 2 Cu 3 O 7- x block with a width of 40 mm. Through theoretical calculations, the influence of structural parameters of triple-peak Halbach array PMG on the vertical magnetic field distribution characteristics is revealed, that is, increasing the proportion of horizontally magnetized permanent magnet (vertically magnetized permanent magnet) is conducive to enhancing the vertical magnetic field in the regions close to (far away from) PMG. Furthermore, combined with the engineering application of HTS-PMG maglev train, an optimized triple-peak Halbach array PMG sample is fabricated. And the reliability of the theoretical model of triple-peak Halbach array PMG is verified by simulation and experimental measurements. Based on the optimized PMG, a full-scale HTS-PMG maglev train test line with a length of 22 m and a standard gauge of 1.435 m (in China) is built up, and the manned test is successfully carried out, which shows the feasibility of the triple-peak Halbach array PMG in large-scale engineering application of the HTS-PMG maglev train.


  • Research on Levitation and Guidance Characteristics of DSSC HTS-PMG Maglev System Integrating Upper Suspension and Down Hanging

    by Dajin Zhou, Jiao Liu, Tianqi Weng, Feinan Cai, Tao Xu, Cuihua Cheng, Yong Zhao

    The maglev train has great application potential in the field of high-speed transportation, which is based on high-temperature superconductor-permanent magnet guideway (HTS-PMG) maglev system. In order to break through the bottleneck of insufficient performance of the conventional upper HTS-PMG maglev system, it is of great value to explore a higher performance maglev configuration. In this article, the mechanical characteristics of the upper suspension and the down hanging type are studied through numerical simulation and experimental methods, and a new type of double-sided strongly coupled (DSSC) HTS-PMG maglev configuration is proposed based on the PMG concentrating magnetic field through the iron plate in the middle. The results show that the upper suspension and down hanging type complement each other in the characteristics of levitation force and guidance force, that is, when the levitation force (guidance force) of the upper suspension type increases (weakens) with the increase of cooling height, the hanging force (guidance force) of the down hanging type exhibits the opposite changing behavior, and vice versa. For the coupled system, within a certain levitation gap range, its levitation force and guidance force can be approximated as the linear superposition of the upper suspension and the down hanging, and the coupling degree of the system increases with the decrease of the levitation gap. Through optimization, the levitation force and guidance force are significantly improved. When the upper cooling height (UCH) and the down cooling height (DCH) are fixed at 20 and 5 mm, at the upper working height (UWH) of 15, 10, and 5 mm, the levitation force is respectively increased by 267.7, 105.7, and 46.8% compared with the upper suspension type. When the UCH is 20, 25, and 30 mm, the guidance force is, respectively, increased by 181.4, 201.2, and 188.2% at the lateral displacement ( LD ) of 20 mm compared with the upper suspension type. The above research results provide a design reference for the development of higher-performance HTS-PMG maglev train.


  • Optimal YBCO Bulk Size to Maximize Running Speed of the SS-HTS Maglev Circular Track System by Static Simulation Experiments

    by Feinan Cai, Jiao Liu, Dajin Zhou, Lifeng Zhao, Yong Zhang, Yong Zhao

    The constraints of experiment site and construction cost have increased difficulties in the high-speed and large-scale experiments of high- $T_{\text{c}}$ superconductor (HTS) maglev. At the beginning of study, a side-suspension high- $T_{\text{c}}$ superconductor (SS-HTS) maglev circular track was successfully built which enabled the prototype vehicle to reach the maximum speed of 160 km/h. However, it is expected that with further increase of the running speed, the insufficient centripetal force caused thereby will destroy the dynamic stability of the circular track system. In order to improve the dynamic performance of circular track system with prototype vehicle running at high speed, static experiments were carried out to simulate the free suspension and dynamic processes of the prototype vehicle. The levitation and guidance performance of bulk $\text{YBa}_2 \text{Cu}_3 \text{O}_{7-x}$ (YBCO) superconductors with different thickness and sectional area were tested during the simulation experiment, and the curve of $K_l$ and $K_g$ was obtained through calculation with the centrifugal force formula. The test and calculation results indicate that the maximum speed of prototype vehicle can rise by 19% compared to the earlier circular system in case of 40 mm × 40 mm × 16 mm (L × W × H) bulk YBCO superconductors. The research findings can provide design reference for optimizing and constructing a SS-HTS maglev circular track system with higher performance and higher speed grade.