A cement-based method for fixing sand in laboratory channels
- 5 March 2013
- journal article
- research article
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 51 (3) , 306-316
Abstract
A method to fix movable beds in river-related laboratory research or physical model studies is proposed and investigated. The motivation was to develop a method that would: (1) not involve the use of harsh chemicals and (2) ensure that the granular roughness of the original movable bed was maintained. The method involves coating the surface with a mixture of sand and Portland cement. Laboratory tests were conducted to determine the amount of cement, and investigate the best method of application, effect on roughness, shear strength and durability. It is found that the method can be used to fix both flat and deformed beds. The method is particularly effective for sands up to 1.1 mm, when it is possible to ensure that the granular roughness of the fixed bed is comparable to that of the movable bed by merely using in the coating mixture a coarser sand than the original one.Keywords
This publication has 11 references indexed in Scilit:
- Experimental analysis of cross‐sectional flow motion in a large amplitude meandering bendEarth Surface Processes and Landforms, 2010
- A semi-permanent method for fixing sand beds in laboratory flumesJournal of Hydraulic Research, 2010
- Experimental Observations of Flow and Bed Processes in Large-Amplitude Meandering FlumeJournal of Hydraulic Engineering, 2009
- On the location in flow plan of erosion–deposition zones in sine–generated meandering streamsJournal of Hydraulic Research, 2008
- Variation of Flow Pattern with Sinuosity in Sine-Generated Meandering StreamsJournal of Hydraulic Engineering, 2006
- Stabilising the sediment bed in laboratory flumesJournal of Hydraulic Research, 2001
- Experimental Studies of bed topography and flow patterns in large‐amplitude meanders: 2. MechanismsWater Resources Research, 1993
- Sediment transport and bed morphology at river channel confluencesSedimentology, 1988
- DETERMINATION OF SAND ROUGHNESS FOR FIXED BEDSJournal of Hydraulic Research, 1974
- On preserving the sand patterns in river modelsJournal of Hydraulic Research, 1972