Shape optimization of a corner‐recessed square tall building to reduce mean wind pressure using a multi‐objective genetic algorithm
- 7 September 2023
- journal article
- research article
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 32 (17)
Abstract
Summary: The current study aims to determine how the corner recession affects tall buildings with square plans. A series of numerical simulations have been conducted to find the parametric models' wind pressure. Visualization tools, such as contour plots and streamlines, present the wind flow near the buildings. Numerical simulations are conducted using RANS k‐ℇ turbulence models considering a length scale of 1:300. Subsequently, a shape optimization study has been carried out to propose a suitable percentage of corner recession, which should minimize the wind pressure on different faces of the building. As design factors, the amount of corner recession (S) and the wind incidence angle (Ø) are taken, along with the mean pressure coefficients (Cp) on the various building faces. Due to the eight axes symmetry of the building configuration, the random sampling technique is used for the Design of Experiment while accounting for the 0°–45° wind angle of attack. The Response Surface Approximation (RSA) is used to construct surrogate models of the objective functions. The RSA models are validated with wind tunnel test results presented in previously published articles. The optimization study is carried out using the multi‐objective genetic algorithm technique.Keywords
This publication has 26 references indexed in Scilit:
- Shape optimization of a feedback-channel fluidic oscillatorEngineering Applications of Computational Fluid Mechanics, 2017
- Characteristics of pedestrian-level wind around super-tall buildings with various configurationsJournal of Wind Engineering and Industrial Aerodynamics, 2017
- Shape optimization of a bidirectional impulse turbine via surrogate modelsEngineering Applications of Computational Fluid Mechanics, 2017
- Effect of internal angles between limbs of cross plan shaped tall building under wind loadWind and Structures, 2017
- Wind induced pressure on 'Y' plan shape tall buildingWind and Structures, 2014
- Wind pressures on tapered and set-back tall buildingsJournal of Fluids and Structures, 2013
- Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurationsJournal of Wind Engineering and Industrial Aerodynamics, 2012
- Characteristics of aerodynamic forces and pressures on square plan buildings with height variationsJournal of Wind Engineering and Industrial Aerodynamics, 2010
- Across-wind responses of an aeroelastic tapered tall buildingJournal of Wind Engineering and Industrial Aerodynamics, 2008
- Across-wind loads of typical tall buildingsJournal of Wind Engineering and Industrial Aerodynamics, 2004