Influence of Trigger Pulse on the Trigger Characteristics of Surface Flashover Trigger Vacuum Switch
- 29 December 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (1) , 116-123
Abstract
Surface flashover triggered vacuum switch (STVS) working performance mainly depends on the electrical characteristics of trigger pulse. This article presents an experimental investigation of the trigger process. The influence of the electrical properties of the trigger pulse on the trigger characteristics is focused. Based on the self-developed high-performance STVS product, the experimental test platform was established. The experimental results show that a shorter delay time of STVS can be obtained by heightening trigger voltage. However, the effect of trigger voltage on time jitter is not obvious. The slight increase in trigger current has evident influence on trigger delay time. It also does not affect the stability of trigger delay. With the increase in trigger voltage rise rate, the trigger delay time and time jitter can be optimized. Finally, the long-term stability of STVS is discussed. After 300 trigger times, the delay time changes from about 140 ns to more than 150 ns and the jitter changes from about 5 ns to more than 10 ns. In the design of STVS products, it is recommended to adopt a trigger system with a fast rise rate of trigger voltage and trigger current.Keywords
Funding Information
- National Natural Science Foundation of China (51777025, 52177131)
- Interdisciplinary Program of Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology (WHMFC202130)
This publication has 26 references indexed in Scilit:
- Effect of electron irradiation on DC surface flashover of polyimide in vacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2016
- Cathode-like luminescence from vacuum-dielectric interface induced by self-stabilizing secondary electron emissionApplied Physics Letters, 2012
- Experimental Study of Electron Emission Characteristics of a Surface Flashover Trigger in a Low Pressure EnvironmentPlasma Science and Technology, 2010
- 10/350-$\mu\hbox{s}$ Crowbar Pulse Current SystemIEEE Transactions on Plasma Science, 2010
- The influence of desorption gas to high power microwave window multipactorPhysics of Plasmas, 2008
- The role of outgassing in surface flashover under vacuumIEEE Transactions on Plasma Science, 2000
- Switching characteristics of the triggered vacuum gap for a high-repetition-rate pulse-power sourceIEEE Transactions on Plasma Science, 1992
- Vacuum surface flashover: A high-pressure phenomenonJournal of Applied Physics, 1985
- Field emission and explosive electron emission processes in vacuum dischargesSoviet Physics Uspekhi, 1983
- Mechanism of pulsed surface flashover involving electron-stimulated desorptionJournal of Applied Physics, 1980