Experimental and Numerical Investigations of Heat Transfer Characteristics for Impinging Swirl Flow
Open Access
- 1 January 2014
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 6
Abstract
This paper reports experimental and computational fluid dynamics (CFD) modelling studies to investigate the effect of the swirl intensity on the heat transfer characteristics of conventional and swirl impingement air jets at a constant nozzle-to-plate distance (L = 2D). The experiments were performed using classical twisted tape inserts in a nozzle jet with three twist ratios (y = 2.93, 3.91, and 4.89) and Reynolds numbers that varied from 4000 to 16000. The results indicate that the radial uniformity of Nusselt number (Nu) of swirl impingement air jets (SIJ) depended on the values of the swirl intensity and the air Reynolds number. The results also revealed that the SIJ that was fitted with an insert of y = 4.89, which corresponds to the swirl number Sw = 0.671, provided much more uniform local heat transfer distribution on the surface. The CFD-predicted results help to explain the experimental measurements in terms of the turbulence intensity. Furthermore, the predicted and measured local Nusselt numbers were consistent with each other.Keywords
Funding Information
- National University of Malaysia
- Ministry of Higher Education
This publication has 19 references indexed in Scilit:
- Enhanced Transient Heat Transfer From Arrays of Jets Impinging on a Moving PlateHeat Transfer Engineering, 2012
- The Numerical Analysis of Oscillating Rectangular Impinging JetsNumerical Heat Transfer, Part A: Applications, 2010
- Heat transfer correlations of perpendicularly impinging jets on a hemispherical-dimpled surfaceInternational Journal of Heat and Mass Transfer, 2010
- Free Liquid Jet Impingement from a Slot Nozzle to a Curved PlateNumerical Heat Transfer, Part A: Applications, 2010
- Analysis of a Synthetic Jet-Based Electronic Cooling ModuleNumerical Heat Transfer, Part A: Applications, 2009
- Jet Impingement Cooling of a Finite Thickness Solid Layer Conjugated with Porous MediumNumerical Heat Transfer, Part A: Applications, 2009
- Mist/steam heat transfer of multiple rows of impinging jetsInternational Journal of Heat and Mass Transfer, 2005
- Predictions of flow and heat transfer in multiple impinging jets with an elliptic-blending second-moment closureInternational Journal of Heat and Mass Transfer, 2005
- Symmetry breaking of flow and heat transfer in multiple impinging jetsInternational Journal of Heat and Fluid Flow, 2003
- Heat transfer of multiple impinging jets with gas–solid suspensionsExperimental Thermal and Fluid Science, 2002