A Novel Magnetic Equivalent Circuit Model for the Corner of Inductor Core
Open Access
- 6 December 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (24) , 5341
Abstract
The accurate calculation of inductance is the most basic problem of inductor design. Based on finite element method (FEM) analysis of the flux density distribution in the corner of the core, a local corner magnetic equivalent circuit (MEC) model is proposed for a core-type inductor. In this model, the corner is divided into three parallel branches, and the joint part of the corner and the core limb are divided into two branches, one of which is continuously divided into three branches. In addition, a flux leakage branch of the core window inner corner is modeled. These branches form a local corner MEC by series and parallel to describe the flux distribution of the corner. The calculation results show that, in the local corner MEC model, the core flux density distribution is consistent with the FEM simulation. The maximum relative error of the inductance is less than 6% and the average relative error is less than 4% compared to the physical prototype measured data with the range of current from 20 A to 1000 A, which shows that the local corner MEC model has a high accuracy inductance calculation.Keywords
This publication has 14 references indexed in Scilit:
- Calculation approach of reluctance in the magnetic circuit of transformer employed to convert into equivalent electric circuitCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2018
- Power density comparison of three-phase AC inductor architectures2017
- Comparison of core loss and magnetic flux distribution in amorphous and silicon steel core transformersElectrical Engineering, 2017
- Magnetic Integration of Three-Phase LCL Filter With Delta-Yoke Composite CoreIEEE Transactions on Power Electronics, 2016
- Power Magnetic Devices2014
- A Comparison of Nodal- and Mesh-Based Magnetic Equivalent Circuit ModelsIEEE Transactions on Energy Conversion, 2009
- Ferrimagnetic Inductor Design Using Population-Based Design AlgorithmsIEEE Transactions on Magnetics, 2009
- Fringing Field Formulas and Winding Loss Due to an Air GapIEEE Transactions on Magnetics, 2007
- Accurately modeling EI core inductors using a high-fidelity magnetic equivalent circuit approachIEEE Transactions on Magnetics, 2005
- Air-gap reluctance and inductance calculations for magnetic circuits using a Schwarz-Christoffel transformationIEEE Transactions on Power Electronics, 1997