Xiaodong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaodong Wang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Heng Du
School of Electronic Science and Engineering, Chongqing University of Posts and Telecommunications, Chongqing 400065, China
2 shared publications Lei Zhu
2 shared publicationsShiyang Shen
2 shared publications- Shiyang Shen
Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714, China
2 shared publications - Xiangyu Wang
Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing, China
2 shared publications Fei Xiao
1 shared publication
Latest Publications
- Open Access
Cascaded Angle-of-Arrival Detection for Wide-Field Optical Phased Array PAT Systems
Integrated optical phased array (OPA) chips enable high-speed beam steering via electronic phase control, providing a promising solution for compact pointing, acquisition, and tracking (PAT) systems. However, OPA-PAT systems must simultaneously achieve wide-field-of-view (FOV) coverage and high-precision angle-of-arrival (AOA) detection. To address this challenge, a cascaded AOA detection method based on a multi-sensor collaborative architecture is proposed. This approach utilizes a distributed detector array (DA) for coarse incident angle estimation over a wide-FOV, which then guides a two-dimensional (2D) galvanometer to steer the beam into a quadrant detector (QD) for fine measurement within a narrow-FOV. A prototype system is developed to validate the proposed cascaded algorithm. Experimental results show that within a ±20° FOV, the proposed system achieves root-mean-square errors (RMSEs) of 0.007° in azimuth and 0.01° in elevation. When integrated into an OPA-PAT terminal, static 2D closed-loop tracking is maintained with an overall tracking error better than 0.016° (RMSE). These results demonstrate that the proposed cascaded detection method can simultaneously provide wide-FOV coverage and high-precision AOA measurement, offering a practical solution for wide-FOV OPA-PAT systems.
Open AccessCascaded Angle-of-Arrival Detection for Wide-Field Optical Phased Array PAT Systems
Integrated optical phased array (OPA) chips enable high-speed beam steering via electronic phase control, providing a promising solution for compact pointing, acquisition, and tracking (PAT) systems. However, OPA-PAT systems must simultaneously achieve wide-field-of-view (FOV) coverage and high-precision angle-of-arrival (AOA) detection. To address this challenge, a cascaded AOA detection method based on a multi-sensor collaborative architecture is proposed. This approach utilizes a distributed detector array (DA) for coarse incident angle estimation over a wide-FOV, which then guides a two-dimensional (2D) galvanometer to steer the beam into a quadrant detector (QD) for fine measurement within a narrow-FOV. A prototype system is developed to validate the proposed cascaded algorithm. Experimental results show that within a ±20° FOV, the proposed system achieves root-mean-square errors (RMSEs) of 0.007° in azimuth and 0.01° in elevation. When integrated into an OPA-PAT terminal, static 2D closed-loop tracking is maintained with an overall tracking error better than 0.016° (RMSE). These results demonstrate that the proposed cascaded detection method can simultaneously provide wide-FOV coverage and high-precision AOA measurement, offering a practical solution for wide-FOV OPA-PAT systems.
- 17 December 2025
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 198
Underwater coherent FMCW LiDAR with interrupted-triangular-wave modulation for 4D imaging
- 17 December 2025
- Published by Elsevier in Optics and Lasers in Engineering
- Vol. 198
Underwater coherent FMCW LiDAR with interrupted-triangular-wave modulation for 4D imaging
- Open Access
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (4) , 1-8
Pointing Acquisition and Tracking System for Free Space Optical Communication Based on Integrated Optical Phased Array
With proliferation of low-earth-orbit satellite (LEOs) constellations, air-to-space laser communications have the potential to realize aircraft broadband Internet services due to its high speed and low latency. A major challenge in aircraft to LEOs laser link is the fast scanning, high-bandwidth pointing acquisition tracking (PAT) approach to achieve rapid link establishment and handover as well as to compensate for errors caused by vibrations of the aircraft platform. In this paper, a PAT system based on integrated optical phased array (OPA) and four quadrant detector (QD) is demonstrated. Rapid azimuth beam scanning is achieved by controlling the OPA's 512 thermal phase shifters, while elevation scanning is carried out by adjusting the laser's wavelength. The arrival angle of the incident beacon is measured by QD and used to adjust the emission direction through FPGA. The experiment shows that the beam steering rise time is less than 60μs in azimuth and 46μs in elevation, while the pointing accuracy is 2.5kHz. The PAT system has low complexity, small size, mechanical-free beam agility steering, and high tracking bandwidth capability.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (4) , 1-8
Open AccessPointing Acquisition and Tracking System for Free Space Optical Communication Based on Integrated Optical Phased Array
With proliferation of low-earth-orbit satellite (LEOs) constellations, air-to-space laser communications have the potential to realize aircraft broadband Internet services due to its high speed and low latency. A major challenge in aircraft to LEOs laser link is the fast scanning, high-bandwidth pointing acquisition tracking (PAT) approach to achieve rapid link establishment and handover as well as to compensate for errors caused by vibrations of the aircraft platform. In this paper, a PAT system based on integrated optical phased array (OPA) and four quadrant detector (QD) is demonstrated. Rapid azimuth beam scanning is achieved by controlling the OPA's 512 thermal phase shifters, while elevation scanning is carried out by adjusting the laser's wavelength. The arrival angle of the incident beacon is measured by QD and used to adjust the emission direction through FPGA. The experiment shows that the beam steering rise time is less than 60μs in azimuth and 46μs in elevation, while the pointing accuracy is 2.5kHz. The PAT system has low complexity, small size, mechanical-free beam agility steering, and high tracking bandwidth capability.
- Open Access
Angle of Arrival for the Beam Detection Method of Spatially Distributed Sensor Array
Laser space networks are an important development direction for inter-satellite communication. Detecting the angle of arrival (AOA) of multiple satellites in a wide field of view (FOV) is the key to realize inter-satellite laser communication networking. The traditional AOA detection method based on the lens system has a limited FOV. In this paper, we demonstrate a system that uses a spatially distributed sensor array to detect the AOA in a wide FOV. The basic concept is to detect AOA using the signal strength of each sensor at different spatial angles. An AOA detection model was developed, and the relationship of key structural parameters of the spatially distributed sensor array on the FOV and angular resolution was analyzed. Furthermore, a spatially distributed sensor array prototype consisting of 5 InGaAs PIN photodiodes distributed on a 3D-printed structure with an inclination angle of 30° was developed. In order to improve the angle calculation accuracy, a multi-sensor data fusion algorithm is proposed. The experimental results show that the prototype’s maximum FOV is 110°. The root mean square error (RMSE) for azimuth is 0.6° within a 60° FOV, whereas the RMSE for elevation is 0.67°. The RMSE increases to 1.1° for azimuth and 1.7° for elevation when the FOV expands to 110°. The designed spatially distributed sensor array has the advantages of a wide FOV and low size, weight, and power (SWaP), presenting great potential for multi-satellite laser communication applications.
Open AccessAngle of Arrival for the Beam Detection Method of Spatially Distributed Sensor Array
Laser space networks are an important development direction for inter-satellite communication. Detecting the angle of arrival (AOA) of multiple satellites in a wide field of view (FOV) is the key to realize inter-satellite laser communication networking. The traditional AOA detection method based on the lens system has a limited FOV. In this paper, we demonstrate a system that uses a spatially distributed sensor array to detect the AOA in a wide FOV. The basic concept is to detect AOA using the signal strength of each sensor at different spatial angles. An AOA detection model was developed, and the relationship of key structural parameters of the spatially distributed sensor array on the FOV and angular resolution was analyzed. Furthermore, a spatially distributed sensor array prototype consisting of 5 InGaAs PIN photodiodes distributed on a 3D-printed structure with an inclination angle of 30° was developed. In order to improve the angle calculation accuracy, a multi-sensor data fusion algorithm is proposed. The experimental results show that the prototype’s maximum FOV is 110°. The root mean square error (RMSE) for azimuth is 0.6° within a 60° FOV, whereas the RMSE for elevation is 0.67°. The RMSE increases to 1.1° for azimuth and 1.7° for elevation when the FOV expands to 110°. The designed spatially distributed sensor array has the advantages of a wide FOV and low size, weight, and power (SWaP), presenting great potential for multi-satellite laser communication applications.
- Open Access
- 6 December 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (24) , 5341
A Novel Magnetic Equivalent Circuit Model for the Corner of Inductor Core
The accurate calculation of inductance is the most basic problem of inductor design. Based on finite element method (FEM) analysis of the flux density distribution in the corner of the core, a local corner magnetic equivalent circuit (MEC) model is proposed for a core-type inductor. In this model, the corner is divided into three parallel branches, and the joint part of the corner and the core limb are divided into two branches, one of which is continuously divided into three branches. In addition, a flux leakage branch of the core window inner corner is modeled. These branches form a local corner MEC by series and parallel to describe the flux distribution of the corner. The calculation results show that, in the local corner MEC model, the core flux density distribution is consistent with the FEM simulation. The maximum relative error of the inductance is less than 6% and the average relative error is less than 4% compared to the physical prototype measured data with the range of current from 20 A to 1000 A, which shows that the local corner MEC model has a high accuracy inductance calculation.
- 6 December 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (24) , 5341
Open AccessA Novel Magnetic Equivalent Circuit Model for the Corner of Inductor Core
The accurate calculation of inductance is the most basic problem of inductor design. Based on finite element method (FEM) analysis of the flux density distribution in the corner of the core, a local corner magnetic equivalent circuit (MEC) model is proposed for a core-type inductor. In this model, the corner is divided into three parallel branches, and the joint part of the corner and the core limb are divided into two branches, one of which is continuously divided into three branches. In addition, a flux leakage branch of the core window inner corner is modeled. These branches form a local corner MEC by series and parallel to describe the flux distribution of the corner. The calculation results show that, in the local corner MEC model, the core flux density distribution is consistent with the FEM simulation. The maximum relative error of the inductance is less than 6% and the average relative error is less than 4% compared to the physical prototype measured data with the range of current from 20 A to 1000 A, which shows that the local corner MEC model has a high accuracy inductance calculation.