Tilted-tool Friction Stir Welding of Steel Material by using Hemispherical Silicon Nitride Tool
Open Access
- 15 December 2025
- journal article
- Published by Iron and Steel Institute of Japan in Tetsu-to-Hagane
- Vol. 111 (17) , 1035-1045
Abstract
Silicon nitride is one of the inexpensive and attractive tool materials for friction stir welding (FSW) of steel material. The improvement of silicon nitride tool life has been studied by controlling welding conditions and the tool geometry. In this study, the tool life of a hemispherical silicon nitride tool tilted toward the retreating side during FSW of steel plate was investigated. The defect-free welded SPHC plate was obtained using the hemispherical silicon nitride tool under the optimum welding condition. The tool life was evaluated at tool rotation speeds of 400, 500 and 700 rpm. At 400 rpm, the tool broke at a welding distance of 100 mm. At 700 rpm, the tool wear was observed at the welding distance of 3.0 m, and the tool broke before reaching the welding distance of 6.0 m. In contrast, at 500 rpm, tool wear or tool breakage was not observed up to the welding distance of 10.0 m. The tool life of the hemispherical silicon nitride tool strongly relates to the welding condition. The temperature of the hemispheric silicon nitride tool was 1078 K at the tool rotation speed of 500 rpm. Tool wear depends on the high temperature strength of the silicon nitride. The use of a simple shape such as the hemispherical tool allows FSW to perform at relatively low temperatures, which prevents tool wear and tool breakage.Keywords
This publication has 33 references indexed in Scilit:
- Asymmetry in microstructure and mechanical properties of FSWed joints using a hemispherical tool tilted towards the retreating sideJournal of Manufacturing Processes, 2024
- Feasibility of friction stir welding using a hemispherical tool tilted towards the retreating sideJournal of Advanced Joining Processes, 2023
- The study of volumetric wearing of PCBN/W-Re composite tool during friction stir processing of pipeline steels (X70) platesThe International Journal of Advanced Manufacturing Technology, 2021
- Double-sided friction stir welding of 40 mm thick low carbon steel plates using a pcBN rotating toolJournal of Manufacturing Processes, 2020
- A review of friction stir welding of steels: Tool, material flow, microstructure, and propertiesJournal of Materials Science & Technology, 2018
- Effect of process parameters on optimum welding condition of DP590 steel by friction stir weldingJournal of Mechanical Science and Technology, 2014
- Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloysMaterials Science and Engineering: A, 2006
- Microstructures in Friction Stir Welded 304 Austenitic Stainless SteelWelding in the World, 2005
- Postgradualer Studiengang "Stahl‐und Metallbau"Stahlbau, 2003
- High temperature hardness and strength correlation in Si3N4Journal of the Less Common Metals, 1983