The Effect of Zr and Y on the Corrosion Behavior of T6-Treated Al–Si–Mg Alloys
Authors:
Open Access
Abstract
The microstructure evolution and corrosion behavior of T6-treated Al–Si–Mg alloys were investigated in the presence of Zr and Y additions by using X-ray diffractometry (XRD), optical microscopy (OM), scanning electron microscopy (SEM), electrochemical measurement, and X-ray photoelectron spectroscopy (XPS). The results show that the coarse dendritic α-Al was refined into finer, equiaxed grains by adding 0.2 wt% Zr, which further promoted the formation of a uniform and dense passive layer in 3.5% NaCl solution at room temperature (≈25 °C). In contrast, the Al–Si–Mg alloy containing 0.3 wt% Y exhibited the highest corrosion rate. This phenomenon arises from converting rod-like eutectic Si particles into a spherical morphology, which exacerbates the intergranular corrosion network and enhances galvanic coupling effects.Keywords
Funding Information
- Major Special Projects of Hunan Province (2023GK1080)
This publication has 32 references indexed in Scilit:
- Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloysCorrosion Science, 2021
- Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloyCorrosion Science, 2020
- SKPFM investigations of intermetallic compounds of innovative Er‐ and Zr‐containing Al–Si–Mg alloys and their influence on corrosion localization in saline solutionMaterials and Corrosion, 2019
- The intergranular corrosion behavior of 6000-series alloys with different Mg/Si and Cu contentApplied Surface Science, 2017
- Grain refinement of hypoeutectic Al-Si alloys with BActa Materialia, 2016
- Grain size distribution effects on the corrosion behaviour of materialsCorrosion Science, 2012
- The role of strontium in modifying aluminium–silicon alloysActa Materialia, 2012
- The influence of yttrium (Y) on the corrosion of Mg–Y binary alloysCorrosion Science, 2010
- Determination of effective capacitance and film thickness from constant-phase-element parametersElectrochimica Acta, 2010
- An exploratory study of the corrosion of Mg alloys during interrupted salt spray testingCorrosion Science, 2009