Understanding the microstructural evolution and mechanical properties of transparent Al-O-N and Al-Si-O-N films
Authors:
Open Access
- 5 November 2019
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 20 (1) , 1031-1042
Abstract
Optically transparent, colorless Al-O-N and Al-Si-O-N coatings with discretely varied O and Si contents were fabricated by reactive direct current magnetron sputtering (R-DCMS) from elemental Al and Si targets and O2 and N2 reactive gases. The Si/Al content was adjusted through the electrical power on the Si and Al targets, while the O/N content was controlled through the O2 flow piped to the substrate in addition to the N2 flow at the targets. The structure and morphology of the coatings were studied by X-ray diffraction (XRD) and transmission electron microscopy (TEM), while the elemental composition was obtained from Rutherford backscattering spectrometry (RBS) and heavy ion elastic recoil detection analysis (ERDA). The chemical states of the elements in the coatings were analyzed by X-ray photoelectron spectroscopy (XPS). Based on analytical results, a model describing the microstructural evolution of the Al-O-N and also previously studied Al-Si-N [ 1 , 2 , 3 , 4 ] coatings with O and Si content, respectively, is established. The universality of the microstructural evolution of these coatings with the concentration of the added element is attributed to the extra valence electron (e–) that must be incorporated into the AlN wurtzite host lattice. In the case of Al-O-N, this additional valence charge arises from the e – acceptor O replacing N in the AlN wurtzite lattice, while the e – donor Si substituting Al fulfills that role in the Al-Si-N system. In view of future applications of ternary Al-O-N and quaternary Al-Si-O-N transparent protective coatings, their mechanical properties such as residual stress (σ), hardness (HD) and Young’s modulus (E) were obtained from the curvature of films deposited onto thin substrates and by nanoindentation, respectively. Moderate compressive stress levels between −0.2 and −0.5 GPa, which suppress crack formation and film-substrate delamination, could be obtained together with HD values around 25 GPa.Keywords
Funding Information
- Competence Centre for Materials Science and Technology (-)
- Eidgenössische Materialprüfungs- und Forschungsanstalt (-)
- Swiss National Science Foundation (200021_150095)
This publication has 39 references indexed in Scilit:
- Charge referencing issues in XPS of insulators as evidenced in the case of Al‐Si‐N thin filmsSurface and Interface Analysis, 2011
- Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafersThin Solid Films, 2009
- Hard yet Tough Nanocomposite Coatings – Present Status and Future TrendsPlasma Processes and Polymers, 2007
- Physical properties of polycrystalline aluminium nitride films deposited by magnetron sputteringDiamond and Related Materials, 2004
- Madelung Potentials and Disorder Broadening of Core Photoemission Spectra in Random AlloysPhysical Review Letters, 1997
- Equilibrium shape of SiPhysical Review Letters, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Intrinsic stress in sputter-deposited thin filmsCritical Reviews in Solid State and Materials Sciences, 1992
- Contact drying modelling of agitated porous alumina beadsChemical Engineering and Processing - Process Intensification, 1991
- Crystal structure refinement of AlN and GaNSolid State Communications, 1977