Investigation of Borehole Network Parameters for Rock Breaking via High-Pressure Gas Expansion in Subway Safety Passages of Environmentally Sensitive Zones
Open Access
- 2 September 2025
- Vol. 15 (17) , 3158
Abstract
To address the challenge of determining the borehole layout scheme in the practical application of high-pressure gas expansion rock breaking, this study takes the excavation of the safety passage at Kaixuan Road Station on the North Extension Line 2 of Chongqing Metro Line 18 as the engineering background. The rock-breaking capacity was evaluated by analyzing the damaged zone volume caused by gas expansion using FLAC3D 6.0 numerical simulation software, and vibration monitoring was conducted for the historical buildings on the surface. This study revealed the following: (1) When the borehole depth is 1.2 m and the charge length is 0.6 m, the optimal angle is 70°, with the optimal vertical and horizontal spacing between holes being 1200 mm and 2000 mm, respectively. (2) The numerical simulations indicated that by adjusting the charge density, the optimized sandstone borehole network parameters could be applied to mudstone strata, and the rock-breaking effect was similar. The difference in the volume of the damaged zones obtained in the two strata was less than 3%. (3) The vibration analysis demonstrated that the peak particle velocity generated by high-pressure gas expansion rock fracturing at the ancient building directly above was 0.06316 cm/s, which was lower than the threshold value of 0.1 cm/s and approximately 67.95% lower than that of explosive blasting. Furthermore, when the tunnel depth exceeded 29 m, the vibration velocity of surface structures remained within the safety range. The results verified the feasibility of applying the same borehole network parameters to different strata, providing theoretical support for the practical application of high-pressure gas expansion rock fracturing technology in engineering projects.Keywords
This publication has 27 references indexed in Scilit:
- Laser rock-breaking mechanism considering rock inhomogeneity and the temperature effectComputers and Geotechnics, 2024
- Rock breaking using liquid nitrogen and water jet: a case of graniteArchives of Civil and Mechanical Engineering, 2024
- Temporal and spatial evolution laws of temperature effects in high-velocity liquid nitrogen jet rock breakingApplied Thermal Engineering, 2024
- Experimental study on dynamic deformation and breaking mechanism of high-temperature hard rock cutting by abrasive water jetInternational Journal of Rock Mechanics and Mining Sciences, 2024
- Burden Effects on Rock Fragmentation and Damage, and Stress Wave Attenuation in Cut Blasting of Large-Diameter Long-Hole StopesRock Mechanics and Rock Engineering, 2023
- Experimental research on laser thermal rock breaking and optimization of the process parametersInternational Journal of Rock Mechanics and Mining Sciences, 2022
- Ground vibration characteristics of carbon dioxide phase transition fracturing: an in situ testBulletin of Engineering Geology and the Environment, 2021
- Permeability enhancement and porosity change of coal by liquid carbon dioxide phase change fracturingEngineering Geology, 2021
- Application of high powered Laser Technology to alter hard rock properties towards lower strength materials for more efficient drilling, mining, and Geothermal Energy productionGeomechanics for Energy and the Environment, 2019
- Insights into the radial water jet drilling technology – Application in a quarryJournal of Rock Mechanics and Geotechnical Engineering, 2018