Design and simulation of a short, variable-energy 4 to 10 MV S-band linear accelerator waveguide
- 12 May 2017
- journal article
- research article
- Published by Wiley in Medical Physics
- Vol. 44 (6) , 2124-2131
Abstract
To modify a previously-designed, short, 10 MV linac waveguide so that it can produce any energy from 4 to 10 MV. The modified waveguide is designed to be a drop-in replacement for the 6MV waveguide used in the author's current linear accelerator-magnetic resonance imager (Linac-MR). Using our group's previously designed short 10 MV linac as a starting point, the port was moved to the fourth cavity, the shift to the first coupling cavity was removed and a tuning cylinder added to the first coupling cavity. Each cavity was retuned using finite element method (FEM) simulations to resonate at the desired frequency. FEM simulations were used to determine the RF field distributions for various tuning cylinder depths, and electron trajectories were computed using a particle-in-cell model to determine the required RF power level and tuning cylinder depth to produce electron energy distributions for 4, 6, 8, and 10 MV photon beams. Monte Carlo simulations were then used to compare the depth dose profiles with those produced by published electron beam characteristics for Varian linacs. For each desired photon energy, the electron beam energy was within 0.5% of the target mean energy, the depth of maximum dose was within 1.5 mm of that produced by the Varian linac, and the ratio of dose at 10 cm depth to 20 cm depth was within 1%. A new 27.5 cm linear accelerator waveguide design capable of producing any photon energy between 4 and 10 MV has been simulated, however coupling port design and the implications of increased electron beam current at 10 MV remain to be investigated. For the specific cases of 4, 6, and 10 MV, this linac produces depth dose profiles similar to those produced by published spectra for Varian linacs.Keywords
Funding Information
- Alberta Cancer Foundation
- Alberta Innovates - Health Solutions
This publication has 15 references indexed in Scilit:
- FEM design and simulation of a short, 10 MV, S‐band Linac with Monte Carlo dose simulationsMedical Physics, 2015
- The Australian Magnetic Resonance Imaging–Linac ProgramSeminars in Radiation Oncology, 2014
- The Rotating Biplanar Linac–Magnetic Resonance Imaging SystemSeminars in Radiation Oncology, 2014
- Feasibility of producing a short, high energy s‐band linear accelerator using a klystron power sourceMedical Physics, 2013
- A study of the effect of in-line and perpendicular magnetic fields on beam characteristics of electron guns in medical linear acceleratorsMedical Physics, 2011
- An integrated 6 MV linear accelerator model from electron gun to dose in a water tankMedical Physics, 2010
- IMRT should not be administered at photon energies greater thanMedical Physics, 2007
- Sensitivity of megavoltage photon beam Monte Carlo simulations to electron beam and other parametersMedical Physics, 2002
- Compact multi-energy electron linear acceleratorsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1985
- Coupled Resonator Model for Standing Wave Accelerator TanksReview of Scientific Instruments, 1967