Vibration-Based Scour-Detection for Bridge-Piers Using a Self-Powered Magnetostrictive Vibration Sensor
- 23 July 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 8 (9) , 1-4
Abstract
Considering the drawbacks of existing scour detection systems, such as expense for installation and sensitivity to pier damage, this study developed a vibration-based scour detection sensor that can be installed without the construction of power lines. Our final objective is the realization of a system that can generate electric power from bridge vibrations caused by passing trains, temporarily store the generated energy, use that energy to measure the natural frequency of a bridge pier, and transmit the measurement results to a server via wireless communication. As the first step in the system development, we conducted field tests to confirm whether the developed sensor could measure the natural frequencies of bridge piers. The time-series data of the sensor output were obtained and transmitted using a wireless transmission module, which was made as a part of the development of the system. The experimental results confirmed that the natural frequencies of the bridge pier could be measured even from the output voltage caused by the microtremors of the pier. Thus, the developed vibration sensor can be used to conduct long-term monitoring of the scour conditions of bridge piers.Keywords
This publication has 7 references indexed in Scilit:
- Improvement in Power Generation Capability of a Self-Powered Vibration Sensor for Bridge Structural Health Monitoring System2023
- A review of bridge scour monitoring techniques and developments in vibration based scour monitoring for bridge foundationsAdvances in Bridge Engineering, 2023
- Magnetostrictive vibration sensor for a self- powered structural health monitoring systemJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2022
- Magnetostrictive Materials and Energy Harvesting for Structural Health Monitoring ApplicationsIOP Conference Series: Materials Science and Engineering, 2020
- Electromagnetic Sensors for Underwater Scour MonitoringSensors, 2020
- Extra-large magnetostrictive vibrational power generator for bridge health monitoring2020
- 2B13 Development of a new scour detector that enables monitoring of pier soundness (Condition Monitoring-Vehicle)The Proceedings of International Symposium on Seed-up and Service Technology for Railway and Maglev Systems : STECH, 2015