Conventional Ti, Co, and Ni silicides have proven unsuitable for forming germanosilicide contacts on Si1-𝑥Ge𝑥(:B) due to phase segregation between the silicide and germanide phases and the high temperatures required for forming the desired low-resistivity phases. Recent advances on the contact resistivity for highly doped epitaxial layers indicate that the Schottky barrier height no longer dominates the contact resistance, broadening the range of viable contact materials and motivating the search for compatible germanosilicides which do not suffer from these limitations. In this context, Y emerges as a promising candidate due to the structural similarity between crystalline YSi1.7 and YGe1.5, and their low formation temperature. The formation of Y germanosilicide on Si1-𝑥Ge𝑥(:B) is found to occur in a two-step process: initial germanosilicidation occurs via a solid state amorphization reaction, yielding a fully amorphous germanosilicide, which subsequently crystallizes in the hexagonal Y1-𝑦-𝑧Si𝑧Ge𝑦 structure, being a solid solution of YSi1.7 and YGe1.5, and exhibiting a single epitaxial texture component. The crystallinity of this phase is investigated as a function of theGe content 𝑥, evidencing an anisotropic defect formation mechanism driven by the lattice mismatch between the germanosilicide and the underlying epitaxial layer. Moreover, B is found to be immobile during germanosilicide formation, resulting in dopant segregation at the contact interface and potential degradation of the active doping concentration in the remaining Si1-𝑥Ge𝑥:B layer. Despite this, a thermal stability up to 720 °C, which is limited by oxidation rather than silicide / germanide phase segregation, encourages further studies on the use of Y as a contact metal for advanced CMOS devices.