AVAndre Vantomme

Andre Vantomme

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andre Vantomme has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Solid solution of isostructural Y silicide and germanide for the formation of uniform germanosilicide contacts on Si1-𝑥Ge𝑥:B source/drain layers

    by Bert Pollefliet, Clément Porret, Andrea Impagnatiello, Alexandre Merkulov, Thierry Conard, Roger Loo, Christophe Detavernier, André Vantomme, Clement Merckling

    Conventional Ti, Co, and Ni silicides have proven unsuitable for forming germanosilicide contacts on Si1-𝑥Ge𝑥(:B) due to phase segregation between the silicide and germanide phases and the high temperatures required for forming the desired low-resistivity phases. Recent advances on the contact resistivity for highly doped epitaxial layers indicate that the Schottky barrier height no longer dominates the contact resistance, broadening the range of viable contact materials and motivating the search for compatible germanosilicides which do not suffer from these limitations. In this context, Y emerges as a promising candidate due to the structural similarity between crystalline YSi1.7 and YGe1.5, and their low formation temperature. The formation of Y germanosilicide on Si1-𝑥Ge𝑥(:B) is found to occur in a two-step process: initial germanosilicidation occurs via a solid state amorphization reaction, yielding a fully amorphous germanosilicide, which subsequently crystallizes in the hexagonal Y1-𝑦-𝑧Si𝑧Ge𝑦 structure, being a solid solution of YSi1.7 and YGe1.5, and exhibiting a single epitaxial texture component. The crystallinity of this phase is investigated as a function of theGe content 𝑥, evidencing an anisotropic defect formation mechanism driven by the lattice mismatch between the germanosilicide and the underlying epitaxial layer. Moreover, B is found to be immobile during germanosilicide formation, resulting in dopant segregation at the contact interface and potential degradation of the active doping concentration in the remaining Si1-𝑥Ge𝑥:B layer. Despite this, a thermal stability up to 720 °C, which is limited by oxidation rather than silicide / germanide phase segregation, encourages further studies on the use of Y as a contact metal for advanced CMOS devices.

  • Open Access

    Lattice location of ion-implanted He 6 in diamond

    by U. Wahl, J. G. Correia, A. Costa, B. Biesmans, G. Magchiels, S. M. Tunhuma, A. Lamelas, A. Vantomme, L. M. C. Pereira

    The properties of He in diamond are of interest with respect to geological dating and the creation of color centers with possible quantum applications. We report on the lattice location of the short-lived ion-implanted nuclear probe He 6 ( t 1 / 2 = 807 ms ) in diamond, which was performed using the beta emission channeling method at CERN's ISOLDE facility. He 6 was implanted with 30 keV into a single-crystalline chemical-vapor deposited diamond sample kept at a temperature ranging from 30 °C up to 800 °C. By means of comparing the measured emission channeling patterns along different crystallographic directions with simulated yields for a variety of possible sites, we conclude that the implanted He 6 occupies tetrahedral (T) interstitial sites, in agreement with theoretical predictions that T sites should be the preferred position of He in diamond. Implantation at 800 °C resulted in a drop in the tetrahedral interstitial fraction by ∼18%, which we interpret as the onset of diffusion, He 6 thus being able to change to lattice sites of low crystallographic symmetry, or reach the surface of the sample or escape to the bulk during its lifetime. We estimate the activation energy for interstitial migration of He to be around 1.63–2.89 eV, which agrees with theoretical predictions of 1.41–2.36 eV from the literature. Activation energies around 2 eV would mean that simple interstitial He cannot be stable in diamond on geological time scales, thus to remain inside, it should be bound to some defect in the material or exist in another form such as within inclusions of other minerals or liquids, or possibly small He bubbles.

  • Open Access

    Impact of Si1-𝑥Ge𝑥:B Source/Drain Layers on The Phase Sequence and Properties of Sc (Germano)Silicide Contacts Formed by Solid Phase Reaction

    by Bert Pollefliet, Clément Porret, Olivier Richard, Han Han, Marta Agati, Alexandre Merkulov, Thierry Conard, Roger Loo, Christophe Detavernier, André Vantomme, et al.

    Advanced CMOS devices require low contact resistances at the interfaces between the source/drain (S/D) regions and metal contacts. At the same time, the required limited layer thicknesses causes silicide formation to be controlled by nucleation, interfacial reactions and lateral growth, leading to unusual phase sequences. This was recently demonstrated for Sc, which yields excellent nMOS contact properties in combination with P-doped Si:P. Advanced pMOS contacts use B-doped Si1-𝑥Ge𝑥:B as S/D material. This work investigates the formation, structural properties and contact resistivity of Sc germanosilicides on Si1-𝑥Ge𝑥:B. In situ synchrotron X-ray diffraction pole figure measurements evidence phase transitions as a function of temperature in 10 nm TiN / 15 nm Sc / Si1-𝑥Ge𝑥(:B). The contact resistivity of the different Sc germanosilicide phases is subsequently measured. The phase and texture of the formed crystalline Sc germanosilicides depends on the Ge content in the Si1-𝑥Ge𝑥:B layer. For low thermal budgets (< 500°C), an amorphous germanosilicide is formed, which yields a low contact resistivity of 4-5 ⋅ 10-9 Ω.cm2. For 𝑥 = 30%, a single orthorhombic germanosilicide phase ScSi1-𝑢Ge𝑢 forms from 500°C, which remains stable up to 700°C and maintains a low contact resistivity of ~5 ⋅ 10-9 Ω.cm2. Ge increases the nucleation barrier of this phase and decreases its stability. Consequently, on Si0.4Ge0.6:B, formation of the metalloid rich hexagonal ScSi1.7-𝑣Ge𝑣 and orthorhombic ScGe2-𝑤Si𝑤 phases is promoted at the expense of orthorhombic ScSi1-𝑢Ge𝑢. As the presence of these phases degrade the contact properties, 𝑥 should be limited to achieve competitive pMOS contact resistivity levels.

  • Investigation of a Reversible Apex Topography in Core/Shell Field Emitters

    by Nadya Spettel, Jeroen E Scheerder, Tsung-Wei Chou, Yuan Tu, Shreya Garg, Jorden De Bolle, Christophe Detavernier, Claudia Fleischmann, André Vantomme

    In atom probe tomography, nonhemispherical specimen apex topographies lead to a varying local magnification. This induces the distorted imaging of features and potential errors in the measured composition. In this paper, we systematically investigate the local magnification in Si-core and VOx-shell specimens: the magnification of the core increases with increasing DC-voltage and a decreasing laser pulse energy, which was shown to be reversible. Here, both the DC-voltage and the laser pulse energy were shown to contribute independently to the change in local magnification. Using atomic force microscopy, the changing magnification of the core was attributed to a change in the apex topography from a protrusion to a concavity in the center of the specimen. Two-dimensional field evaporation simulations were used to establish a link between the apex topography, the local magnification and (local) fields of evaporation. The observed apex topographies could be explained by silicon behaving as a low-field material for one experimental condition while behaving as a high-field material for another experimental condition.

  • Bayesian approach to simultaneously improve the stopping cross-sections of He in Au and Ni

    by Ruben Van der Borght, René Heller, Matias Bejide, Karim-Alexandros Kantre, Frans Munnik, André Vantomme, Johan Meersschaut

  • Formation and texture of ScSi from Sc thin films deposited on Si substrates

    by Bert Pollefliet, Clement Porret, Jean-Luc Everaert, Kiroubanand Sankaran, Olivier Richard, Han Han, Alex Merkulov, Marta Agati, Roger Loo, Christophe Detavernier, et al.

    Scandium (Sc) silicides, formed through solid-state reactions between thin Sc films and Si, have recently gained attention for their potential in low-resistance metal/semiconductor contacts. In this work, in situ x-ray diffraction is used to investigate the phase evolution of Sc thin films deposited on Si(001), Si(110), and Si(111) substrates. As-deposited, Sc crystallizes in the hexagonal P63/mmc structure, while a thin amorphous silicide interlayer exists at the Sc/Si interface. Upon annealing, this interlayer thickens via a solid-state amorphization reaction between Sc and Si. At higher temperatures, orthorhombic ScSi nucleates at the interface, while residual Sc transforms into the metastable P6122 hexagonal phase before fully reacting. The formation of orthorhombic ScSi from the amorphous precursor phase is nucleation-controlled. As a result, the crystallization temperature, textural disorder, and interface roughness depend on the Si substrate orientation. On Si(001) and Si(111), ScSi exhibits multiple epitaxial texture components associated with smooth interfaces. In contrast, Si(110) shows the highest crystallization temperature, a rough interface, and a highly disordered axiotaxial texture. Surprisingly, this axiotaxy occurs despite the absence of one-dimensional lattice matching between the film and the substrate.

  • Reviewing the Experimental Estimation of the Laser-Induced Apex Temperature in Atom Probe Tomography and Application to Si Field Emitter in UV

    by Jeroen E Scheerder, Zeno Maesen, Richard J H Morris, Masoud Dialameh, André Vantomme, Claudia Fleischmann

    Determining the laser-induced specimen apex temperature in atom probe tomography is fundamental to understanding and ensuring analytical accuracy and reliability. This study reviews the existing protocols and assesses their applicability to experimentally determine the apex temperature rise of silicon specimens under ultraviolet laser pulsing in the LEAP 5000 XR. We demonstrate that the method that incorporates the temperature-dependent specific heat of Si offers the best approach, which even works in the athermal field-evaporation regime of this material. Apex temperature increases of 51–146 K are found for laser pulse energies of 1–6 pJ at a base temperature of 50 K. The subsequently extracted field-evaporation barrier of (110 ± 10) meV for a field reduction ≳0.9 aligns with field-evaporation model predictions. From the review of the literature across different materials and methods, inconsistent apex temperature estimates between methods based on voltage and laser mode were found. However, a reasonably consistent trend between the laser-induced temperature rise and the zero-barrier evaporation field is observed. This suggests a simplified protocol for estimating the rise in specimen apex temperature with increasing laser energy, potentially offering a straightforward and practical route for broader application in atom probe tomography studies.


  • Open Access

    Anisotropic crystallization of orthorhombic ScSi on Si(001) substrates

    by Bert Pollefliet, Clement Porret, Jean-Luc Everaert, Kiroubanand Sankaran, Olivier Richard, Han Han, Roger Loo, Christophe Detavernier, André Vantomme, Clement Merckling

    Scandium-based silicides have attracted attention as new contact materials for ultimately scaled CMOS devices. Excellent contact properties in combination with P-doped Si have been demonstrated. However, unlike conventional Ti, Co, and Ni silicides, little is known about the formation mechanisms and properties of Sc silicides. This manuscript, therefore, reports on the formation and structural properties of orthorhombic ScSi silicide formed by solid state reaction between a sputter deposited 15 nm Sc film and a Si(001) substrate. Synchrotron x-ray diffraction (XRD) pole figures, in combination with cross-sectional transmission electron microscopy, are leveraged to determine the texture of ScSi. An epitaxial texture with two different components is evidenced. Large (≳20 nm) grains, having a minimal defectivity originating from the lattice mismatch between the silicide and the substrate, are distinguished from small (≲5 nm) nanotwinned grains. The formation of these two sets of grains is investigated by in situ XRD. Due to a solid state amorphization reaction between Sc and Si, the formation of orthorhombic ScSi is preceded by the formation of an amorphous ScSi phase. Orthorhombic ScSi formation is initiated at ∼320 °C by the crystallization of small nuclei at the interface with Si, as evidenced for the first time by cross-sectional transmission electron microscopy. These nuclei share a singular epitaxial orientation, corresponding to the one of the large grains in the final ScSi film. Further crystallization occurs anisotropically in the lateral direction. Along the c axis, the initial epitaxial orientation is maintained. However, along the a axis, twin defects are generated, resulting in the small grain size.


  • Open Access

    Quantification of boron in a SiGe epilayer using ion beam analysis

    by Quan Bai, Masoud Dialameh, Anna H. Chakkunny, Richard J.H. Morris, Clément Porret, André Vantomme, Johan Meersschaut


  • The Core/Shell Interface in InP/ZnSe Colloidal Quantum Dots

    by Luca Giordano, Pieter Schiettecatte, Yannick Coppel, Qiang Zhao, Yannic U. Staechelin, Guillaume Bonifas, Hannes Van Avermaet, Celine Nayral, Holger Lange, André Vantomme, et al.