Influence of the Small Sc and Zr Additions on the As-Cast Microstructure of Al–Mg–Si Alloys with Excess Silicon
Open Access
Abstract
This research is devoted to the study effects of complex alloying of Al-0.3 wt. % Mg-1 wt. % Si and Al-0.5 wt. % Mg-1.3 wt. % Si alloys by small additions of Sc and Zr on the microstructure in the as-cast condition. The effect of small additions of these elements on the microhardness, electrical conductivity, grain size and phase composition of the indicated alloy systems was studied. The methods of optical and electron microscopy were used for the study. Moreover, the phase composition was calculated using the Thermo-Calc software package. The study showed a strong effect of the chemical composition of investigated alloys on the size of the grains, which, with a certain combination of additives, can decrease several times. Grain refinement occurs both due to supercooling and formation of primary Al3Sc particles in the liquid phase. Alloys based on Al-0.5 wt. % Mg-1.3 wt. % Si are more prone to the formation of this phase since a lower concentration of Sc is required for it to occur. In addition, more silicon interacts with other elements. At the same time, Al-0.3 wt. % Mg-1 wt. % Si requires lower temperature for complete dissolution of Mg2Si, which can contribute to more efficient heat treatment, which includes reducing the number of steps. TEM data show that during ingot cooling (AlSi)3ScZr dispersoid precipitates. This dispersoid could precipitate as coherent and semi-coherent particles with L12 structure as well as needle-shaped particles. The precipitation of coherent and semi-coherent particles during cooling of the ingot indicates that they can be obtained during subsequent multistage heat treatment. In addition, in the Al0.5Mg1.3Si0.3Sc alloy, metastable β″ (Mg5Si6) are precipitated.Keywords
Funding Information
- Russian Science Foundation (21-19-00548)
This publication has 38 references indexed in Scilit:
- Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloysActa Materialia, 2012
- Mechanisms controlling the artificial aging of Al–Mg–Si AlloysActa Materialia, 2011
- Aluminium in Innovative Light-Weight Car DesignMATERIALS TRANSACTIONS, 2011
- Effects of Cu Addition on Behavior of Nanoclusters during Multi-Step Aging in Al-Mg-Si AlloysMATERIALS TRANSACTIONS, 2011
- Structure and properties of Al-Mg-Si alloys with Zr and Sc additions produced by melt spinning and twin rolling casting techniquesMetallic Materials, 2010
- Resource-Saving technology for the production of cast aluminum alloysSteel in Translation, 2007
- Precipitation of Phases in Al-Mg-Si-Cu Alloy with Sc and Zr Additions during Heat TreatmentSolid State Phenomena, 2007
- Aluminium Foil as a Food Packaging Material in Comparison with Other MaterialsFood Reviews International, 2007
- Recent development in aluminium alloys for the automotive industryMaterials Science and Engineering: A, 2000
- The solidification behaviour of dilute aluminium–scandium alloysActa Materialia, 1998