Transient Response of Submerged Plates Subject to Underwater Shock Loading: An Analytical Perspective
- 19 May 2008
- journal article
- Published by Wiley in Journal of Applied Mechanics
- Vol. 75 (4) , 044504
Abstract
In this paper, Taylor’s floating air-backed plate (ABP) model is extended to the case of a submerged water-backed plate (WBP) within the acoustic range. The solution of the WBP is cast into the same format as that of the ABP with a modified fluid-structure interaction (FSI) parameter, which allows a unified analysis of the ABP and WBP using the same set of formulas. The influence of back conditions on fluid and structural dynamics, including fluid cavitation, is systematically investigated. Asymptotic limits are mathematically identified and physically interpolated. Results show that the WBP experiences lower equivalent pressure loading, reduced structural response, and hence lower peak momentum gaining. The time to reach peak momentum is shorter for the WBP than for the ABP. Cavitation is found to be almost inevitable for the ABP, while relevant to the WBP only for a small range of the FSI parameter. Implications to shock response of submerged structures are briefly discussed.Keywords
This publication has 23 references indexed in Scilit:
- Simplified model for predicting impulsive loads on submerged structures to account for fluid-structure interactionInternational Journal of Impact Engineering, 2007
- A Novel Fluid Structure Interaction Experiment to Investigate Deformation of Structural Elements Subjected to Impulsive LoadingExperimental Mechanics, 2006
- An underwater shock simulatorProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- The Response of Metallic Sandwich Panels to Water BlastJournal of Applied Mechanics, 2005
- Multifunctional periodic cellular metalsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2005
- One-dimensional response of sandwich plates to underwater shock loadingJournal of the Mechanics and Physics of Solids, 2005
- A comparative study of impulse-resistant metal sandwich platesInternational Journal of Impact Engineering, 2004
- Dynamic Response of a Clamped Circular Sandwich Plate Subject to Shock LoadingJournal of Applied Mechanics, 2004
- Homogenization of sandwich structuresInternational Journal for Numerical Methods in Engineering, 2004
- The Resistance of Clamped Sandwich Beams to Shock LoadingJournal of Applied Mechanics, 2004