Thermodynamic Evaluation of Enhanced CO2 Conversion in Innovative Slag Splashing Processes in Converters
- 25 January 2025
- journal article
- Published by Wiley in Steel Research International
- Vol. 96 (9) , 310-320
Abstract
The innovative slag splashing technique enhances the recycling of CO2 in the steel industry. However, thermodynamic experiments overestimate CO2 conversion because the temperature drop in the process is not taken into account. Therefore, FactSage is employed to reevaluate it. Calculations are validated by comparison with experiments. It is found that employing CO2 for the slag splashing process leads to a decrease in equilibrium temperature. Increasing the carbon addition enhances CO generation and CO2 conversion but results in a further reduced temperature. Elevating the temperatures of the slag and CO2 has no effect on CO generation and CO2 conversion. However, it proves beneficial for increasing the equilibrium temperature. As the most effective measure, increasing the FeO content in the slag improves CO2 conversion while significantly lowering the slag solid fraction. When the initial FeO content is 17.24 mass%, the initial temperature is 1873 K, and the CO2 temperature is 300 K, the optimal carbon addition is 1.5 mass%. By increasing the slag and CO2 temperatures and elevating the initial FeO content, the carbon addition can reach 3.0 mass%, and CO2 conversion reaches 53.29%.Keywords
This publication has 15 references indexed in Scilit:
- Numerical Simulation of CO2 Used for Slag Splashing Process in ConverterSteel Research International, 2023
- The Behavior of CO2 Supersonic Jets in the Converter Slag-Splashing ProcessJournal of Sustainable Metallurgy, 2022
- A review on low carbon emissions projects of steel industry in the WorldJournal of Cleaner Production, 2021
- A review of CO2 emissions reduction technologies and low-carbon development in the iron and steel industry focusing on ChinaRenewable and Sustainable Energy Reviews, 2021
- Computational Thermodynamic Calculations: FactSage from CALPHAD Thermodynamic Database to Virtual Process SimulationMetallurgical and Materials Transactions B, 2020
- Viscous Behavior of FeO‐Bearing Slag Melts Considering Structure of SlagSteel Research International, 2018
- Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten SlagsMetallurgical and Materials Transactions B, 2016
- Influence the FeO Content on Slag Viscosity at his Spraying. Increase the Life of the Refractory LiningGlass and Ceramics, 2016
- Aluminum Deoxidation Equilibria in Liquid Iron: Part III—Experiments and Thermodynamic Modeling of the Fe-Mn-Al-O SystemMetallurgical and Materials Transactions B, 2016
- Overview of the applications of thermodynamic databases to steelmaking processesCalphad, 2010