Frictional Behaviour and Surface Topography Evolution of DLC‐Coated Biomedical Alloys
Open Access
- 1 January 2025
- journal article
- Published by Institution of Engineering and Technology (IET) in Biosurface and Biotribology
- Vol. 11 (1)
Abstract
Advanced engineering coatings offer a promising solution to enhance the longevity and performance of medical biomaterials in orthopaedic implants. This study hypothesises that diamond‐like carbon (DLC) coatings exhibit distinct frictional performance based on substrate and counterface material. Three different DLC coatings were tested using a pin‐on‐plate test in four material combinations. Virgin and DLC‐coated CoCrMo and Ti6Al4V pins were tested under sliding against UHMWPE and glass plates with simulated body fluid lubrication. Results revealed that coating composition significantly impacts frictional performance, with silicon‐ and oxygen‐doped coatings showing great potential to minimise friction. Surprisingly, reducing contact pressure had either a neutral or somewhat negative effect. Future investigations will focus on long‐term testing and lubrication analyses of these material combinations.Keywords
Funding Information
- Grantová Agentura České Republiky
This publication has 39 references indexed in Scilit:
- Wear Mechanism of Superhard Tetrahedral Amorphous Carbon (ta‐C) Coatings for Biomedical ApplicationsAdvanced Materials Interfaces, 2023
- Enhancement of adhesion by a transition layer: Deposition of a-C film on ultrahigh molecular weight polyethylene (UHMWPE) by magnetron sputteringApplied Surface Science, 2016
- Visualization of lubricating films between artificial head and cup with respect to real geometryBiotribology, 2015
- Fabrication and characterization of DLC coated microdimples on hip prosthesis headsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2014
- Testing of Artificial Hip Joints2013
- Biocompatibility and mechanical properties of diamond‐like coatings on cobalt‐chromium‐molybdenum steel and titanium‐aluminum‐vanadium biomedical alloysJournal of Biomedical Materials Research Part A, 2010
- Tribological behavior of DLC-coated articulating joint implantsActa Biomaterialia, 2010
- Doping and Alloying Effects on DLC Coatings2007
- Comparison of Diamond‐Like‐Carbon and Alumina‐Oxide articulating with Polyethylene in Total Hip ArthroplastyMaterialwissenschaft und Werkstofftechnik, 2003
- Reduction of wear in total hip replacement prostheses by amorphous diamond coatingsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2003