Application of Calcined Eggshell Powder as Functional Filler for High Density Polyethylene
- 27 March 2013
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (10) , 1025-1033
Abstract
Calcined eggshell powder, prepared from waste eggshell, was melted mixed with HDPE at contents of 10–40 wt%. It was shown that calcined eggshell powder was a good functional filler for HDPE. Young's modulus and ultimate stress of the filled HDPE increased with increasing the filler content. In addition, thermal decomposition temperature and yield strength of the filled HDPE were not significantly influenced by the addition of the filler. Compatibilizing the filled HDPE with 2 wt% maleic anhydride grafted HDPE improved impact strength of the filled HDPE according to homogeneous distribution of the filler.Keywords
This publication has 18 references indexed in Scilit:
- Preparation and properties of eggshell/β‐polypropylene bio‐compositesJournal of Applied Polymer Science, 2011
- Characterization of calcium oxide derived from waste eggshell and its application as CO2 sorbentCeramics International, 2011
- Calcium and aluminium-based fillers as flame-retardant additives in silicone matrices II. Analyses on composite residues from an industrial-based pyrolysis testPolymer Degradation and Stability, 2011
- Effect of Polyethylene-Grafted Maleic Anhydride (PE-g-MAH) on Properties of Low Density Polyethylene/Eggshell Powder (LDPE/ESP) CompositesPolymer-Plastics Technology and Engineering, 2010
- Mechanical strengths of epoxy resin composites reinforced by calcined pearl shell powdersJournal of Applied Polymer Science, 2009
- Cuttlebone as reinforcing filler for natural rubberEuropean Polymer Journal, 2008
- Eggshell, a new bio-filler for polypropylene compositesMaterials Letters, 2007
- LDPE-g-MAH prepared through solid-phase mechanochemistry and its compatibilizing effects on HDPE/CaCO3Polymer-Plastics Technology and Engineering, 2002
- The role of filler volume fraction in the strain-rate dependence of calcium carbonate-reinforced polyethyleneJournal of Applied Polymer Science, 1998
- Failure processes in particulate filled polypropyleneFibre Science and Technology, 1983